eMaxMobileApp 4+
Markus Schlegel
Entwickelt für iPad
-
- 0,99 €
Screenshots
Beschreibung
...the most advanced optimizing tool for STePS systems.
All Bluetooth capable displays SC-EM800, SC-E8000, SC-E7000, SC-E6100, SW-EN600-L switch and EW-EN100 cockpit are supported!
Additionally to DU-E80X0 motors, now DU-EP801, DU-EP800, DU-EP600, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
Partially compatible also with the latest Shimano motor firmware versions!
See www.eMax-Tuning.com or get detailed & personal information via eMail from info@eMax-Tuning.com
Neuheiten
Version 1.73
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com.
TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano!
Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via info@eMax-Tuning.com.
This version 1.73 for STEPS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 display types, EW-EN100 cockpit as well as the SW-EN600-L unit.
Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
The new generation drive units DU-EP801 and DU-E600 as well as its variants RS and CRG are partially supported now
All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version.
Special to DU-E80X0 drive units:
With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm.
(with motor firmware 4.2.7 - 4.6.1, the max. assist ratio value could be set 500%)
(with motor firmware 4.2.7 - 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W)
new in version 1.73 (15.04.24):
- partial compatibility for EP801/EP motor firmware 4.2.2
new in version 1.72 (26.03.24):
- partial compatibility for EP801/EP motor firmware 4.2.1
new in version 1.71 (09.02.24):
- partial compatibility for EP801/EP motor firmware 4.2.0
- minor optimizations
new in version 1.70 (23.10.23):
- minor bug fix
new in version 1.69 (09.10.23):
- minor improvements, change of EP801/EP6 message dialog texts
new in version 1.68 (29.09.23):
- adaption to DUE50X0 (DUE5000, DUE5080) FW 4.4.10
new in version 1.67 (11.09.23):
- bugfix for EP8 (DU-EP800) and new motor firmware 4.1.11
new in version 1.66 (07.09.23):
- adaption to DUEP801 (DUEP801, DUEP801-CRG) FW 4.1.1
- adaption to DUEP600 (DUEP600, DUEP600-CRG) FW 4.1.1
- adaption to DUEP800 (DUEP800, DUEP800-CRG) FW 4.1.11
- adaption to DUE80X0 (DUE8000, DUE8080) FW 4.9.5
- adaption to DUE7000 FW 4.7.7
- adaption to DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.7.7
new in version 1.65 (02.09.23):
- EP801/EP6 change of max. peak power and max. torque range added
- EP801/EP6 "reduced max. speed setting" enabled and enhanced
- EP801/EP6 "motor angle setting" enabled
- SC-EN500 display added
- new cassette types added (just for reading)
- correction in EP8xx performance view site with jump to next edit field
- bugfix: display speed adjustment value was unintentionally jumping from max. value +5,0 back to -5,0 when pressing forward button
new in version 1.63 (31.03.23):
- update to newest firmware version 4.4.9 for DUE50X0
- update to newest firmware version 4.7.6 for DUE61X0 & DUE7000
- update to newest firmware version 4.1.10 for DUEP800 (EP8, EP8-CRG. EP8-RS)
new in version 1.62 (21.03.23):
- minor optimizations and bug fixes
new in version 1.61 (02.03.23):
- minor optimizations and bug fixes
new in version 1.59 (26.02.23):
- new battery types, Shimano STePS components and destination settings added
new in version 1.58 (28.10.22):
- corrections for display speed adjustment (special settings)
new in version 1.57 (18.10.22):
- update to newest firmware version 4.4.8 for DUE50X0
- update to newest firmware version 4.7.5 for DUE61X0 & DUE7000
- update to newest firmware version 4.9.4 for DUE80X0
- update to newest firmware version 4.1.9 for DUEP800 (EP8, EP8-CRG. EP8-RS)
new in version 1.56 (17.10.22):
- new battery types added
- change of EP8 profile OEM default settings added
new in version 1.55 (01.10.22):
- display speed adjustment
- torque range min. value added
- improvements and indication for special EP8 types
Bewertungen und Rezensionen
Geniale App - für 1 EUR den Shimano abstimmen
Hat super geklappt- App geladen, mit dem eBike verbunden - auf 85NM und 500 Watt Max gestellt und aus einem RS einen Standard EP8 gemacht. Jetzt habe ich auf einem Profil den EP8 und auf dem zweiten Profil den RS. V-Max ist gleich geblieben, das will ich gar nicht erhöhen. Alles ohne Account oder Anmeldung. Anfangs hatte ich ein Problem weil ich die Anleitung gepflegt ignoriert hatte - ein Email Später hat mir der Support sofort geantwortet und geholfen - top App und Top Support!
Entwickler-Antwort ,
Prima - wir freuen uns sehr dass Sie mit unserer Software bereits in der lizenzfreien Version das volle Potential Ihres EP8 entfalten konnten. Vielen Dank für die sehr nette Bewertung. :-)
eMax-Tuning
Auch am Sonntag perfekter Service
Man kann sich echt 7 Tage melden und bekommt auch eine Antwort zurück.
Entwickler-Antwort ,
Besten Dank - wir freuen uns dass wir Ihnen helfen konnten.
Toll und Top
Spitzen App für EP8-RS und kurzfristiger super Support.
Die Dokumentation beschreibt den Downgrade sehr einfach.
Entwickler-Antwort ,
Besten Dank für die nette 5 Sterne Bewertung. Wir freuen uns sehr darüber dass Sie mit unserem Produkt und Service Ihr Orbea Fahrrad optimieren konnten. 😉
App-Datenschutz
Der Entwickler, Markus Schlegel, hat darauf hingewiesen, dass die Datenschutzrichtlinien der App den unten stehenden Umgang mit Daten einschließen können. Weitere Informationen findest du in den Datenschutzrichtlinien des Entwicklers.
Keine Daten erfasst
Der Entwickler erfasst keine Daten von dieser App.
Die Datenschutzpraktiken können zum Beispiel je nach den von dir verwendeten Funktionen oder deinem Alter variieren. Weitere Infos
Informationen
- Anbieter
- Markus Schlegel hat sich nicht als Händler für diese App ausgewiesen. Falls du Verbraucher:in im Europäischen Wirtschaftsraum bist, gelten die Verbraucherrechte nicht für Verträge zwischen dir und dem Anbieter.
- Größe
- 12 MB
- Kategorie
- Sport
- Kompatibilität
-
- iPhone
- Erfordert iOS 12.0 oder neuer.
- iPad
- Erfordert iPadOS 12.0 oder neuer.
- iPod touch
- Erfordert iOS 12.0 oder neuer.
- Mac
- Erfordert macOS 11.0 (oder neuer) und einen Mac mit Apple M1-Chip (oder neuer).
- Apple Vision
- Erfordert visionOS 1.0 oder neuer.
- Sprachen
-
Englisch
- Alter
- 4+
- Copyright
- © IBHardSoft
- Preis
- 0,99 €
Support
-
Familienfreigabe
Bis zu sechs Familienmitglieder können diese App bei aktivierter Familienfreigabe nutzen.