eMaxMobileApp 4+
Markus Schlegel
Designed for iPad
-
- $1.99
Screenshots
Description
...the most advanced optimizing tool for STePS systems.
All Bluetooth capable displays SC-EM800, SC-E8000, SC-E7000, SC-E6100, SW-EN600-L switch and EW-EN100 cockpit are supported!
Additionally to DU-E80X0 motors, now DU-EP801, DU-EP800, DU-EP600, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
Partially compatible also with the latest Shimano motor firmware versions!
See www.eMax-Tuning.com or get detailed & personal information via eMail from info@eMax-Tuning.com
What’s New
Version 1.73
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com.
TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano!
Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via info@eMax-Tuning.com.
This version 1.73 for STEPS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 display types, EW-EN100 cockpit as well as the SW-EN600-L unit.
Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
The new generation drive units DU-EP801 and DU-E600 as well as its variants RS and CRG are partially supported now
All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version.
Special to DU-E80X0 drive units:
With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm.
(with motor firmware 4.2.7 - 4.6.1, the max. assist ratio value could be set 500%)
(with motor firmware 4.2.7 - 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W)
new in version 1.73 (15.04.24):
- partial compatibility for EP801/EP motor firmware 4.2.2
new in version 1.72 (26.03.24):
- partial compatibility for EP801/EP motor firmware 4.2.1
new in version 1.71 (09.02.24):
- partial compatibility for EP801/EP motor firmware 4.2.0
- minor optimizations
new in version 1.70 (23.10.23):
- minor bug fix
new in version 1.69 (09.10.23):
- minor improvements, change of EP801/EP6 message dialog texts
new in version 1.68 (29.09.23):
- adaption to DUE50X0 (DUE5000, DUE5080) FW 4.4.10
new in version 1.67 (11.09.23):
- bugfix for EP8 (DU-EP800) and new motor firmware 4.1.11
new in version 1.66 (07.09.23):
- adaption to DUEP801 (DUEP801, DUEP801-CRG) FW 4.1.1
- adaption to DUEP600 (DUEP600, DUEP600-CRG) FW 4.1.1
- adaption to DUEP800 (DUEP800, DUEP800-CRG) FW 4.1.11
- adaption to DUE80X0 (DUE8000, DUE8080) FW 4.9.5
- adaption to DUE7000 FW 4.7.7
- adaption to DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.7.7
new in version 1.65 (02.09.23):
- EP801/EP6 change of max. peak power and max. torque range added
- EP801/EP6 "reduced max. speed setting" enabled and enhanced
- EP801/EP6 "motor angle setting" enabled
- SC-EN500 display added
- new cassette types added (just for reading)
- correction in EP8xx performance view site with jump to next edit field
- bugfix: display speed adjustment value was unintentionally jumping from max. value +5,0 back to -5,0 when pressing forward button
new in version 1.63 (31.03.23):
- update to newest firmware version 4.4.9 for DUE50X0
- update to newest firmware version 4.7.6 for DUE61X0 & DUE7000
- update to newest firmware version 4.1.10 for DUEP800 (EP8, EP8-CRG. EP8-RS)
new in version 1.62 (21.03.23):
- minor optimizations and bug fixes
new in version 1.61 (02.03.23):
- minor optimizations and bug fixes
new in version 1.59 (26.02.23):
- new battery types, Shimano STePS components and destination settings added
new in version 1.58 (28.10.22):
- corrections for display speed adjustment (special settings)
new in version 1.57 (18.10.22):
- update to newest firmware version 4.4.8 for DUE50X0
- update to newest firmware version 4.7.5 for DUE61X0 & DUE7000
- update to newest firmware version 4.9.4 for DUE80X0
- update to newest firmware version 4.1.9 for DUEP800 (EP8, EP8-CRG. EP8-RS)
new in version 1.56 (17.10.22):
- new battery types added
- change of EP8 profile OEM default settings added
new in version 1.55 (01.10.22):
- display speed adjustment
- torque range min. value added
- improvements and indication for special EP8 types
Ratings and Reviews
This App is Excellent
I bought a Focus Jam2 a few years ago. The motor was restricted to 25km per hour. My friends and I have private property for mountain biking. I bought the EMax app and after a little of fidgeting around to get the blue tooth connected it gave me control over the motor firmware and allowed me to unrestricted the motor so I could get up to 56km per hour out of it.
During that process I contacted EMax and the app developer / owner Marcus Schlegel sent me info and was very patient and helped me connect and configure. The customer service was most excellent.
The beauty of the software is it allows me to restrict it if I want after. It’s all on my iPhone.
A few years later I had some trouble and needed to do some more complex reconfiguring. So I got a Shimano pc linkage devise SM-PCE02 which allowed me more access through the app using hardwire connections.
I was a bit flustered by the process so I contacted Markus again and he helped me understand and control the process.
Markus is a riding enthusiast he built the app to get the most from the Shimano 8000 motor.
The App is amazing and the customer service is most excellent.
Highly recommended.
Developer Response ,
Thank you very much for this excellent 5star rating. I love you guys and girls from "down under" and hope that I could manage to visit your beautiful place again one time and do some great bike rides and enjoy the great screnery as I did almost 30 years ago. Best regards from Markus and the eMax - team :-)
Does the job superbly!!!
I only started reading up on apps like eMAX. And did not really know what to expect. I read up a little bit about what this can do. And also how much more it can do if you have the right firmware.
Yes I have read all the warnings and what firmware is suited for what you want the app to do. The license is not cheap! But I have to give it 5 stars because what I wanted to modify went like clockwork.
I am quite happy with the app! People will need to read all the important sections on what firmware will give you more options. Just remember, downgrading a firmware is very risky.
If you read all the disclaimer, and fully understand that this app can do all the description says but it comes down to firmware and hardware.
I absolutely have no complaints about this app. It did what I expected it to do end of story. And the beginning of faster speeds and some extras.
Developer Response ,
This is great stuff - thanks a lot for your perfect review! It is sometimes really hard for us if people will not like to read this sometimes really complicated issues around STEPS systems. But you went through and also made the effort to write that much and real true facts. Big hug and best greetings to the beloved Down Under!
Works great and the developer was awesomely helpful
Thanks
Developer Response ,
We are really happy to make other STePS bikers happy too, because we know perfectly how awesome it is to ride that kind of bikes. Many thanks for your perfect rating - we appreciate that a lot. Best regards from the eMax - team and have fun and a safe ride all the times;-)
App Privacy
The developer, Markus Schlegel, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer's privacy policy.
Data Not Collected
The developer does not collect any data from this app.
Privacy practices may vary, for example, based on the features you use or your age. Learn More
Information
- Seller
- Markus Schlegel
- Size
- 12 MB
- Category
- Sports
- Compatibility
-
- iPhone
- Requires iOS 12.0 or later.
- iPad
- Requires iPadOS 12.0 or later.
- iPod touch
- Requires iOS 12.0 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English
- Age Rating
- 4+
- Copyright
- © IBHardSoft
- Price
- $1.99
Supports
-
Family Sharing
Up to six family members can use this app with Family Sharing enabled.