iPad-Screenshots

Beschreibung

Panoploid is an E-Multimedia Composer and an interactive Player.

Panoploid is the iPhone version of Panoply for the iPhone.

Create your business card, greeting card, next panoramic photo, ipod playlist, party invitation with directions, travel book with audio/video, executive multimedia presentation, art sketches, music video album with cover art: all on the iPhone.

Device Requirements:
This application runs only on iPad 3 or higher.

Similar to E-book, in addition to text and image, you can composite maps and graphics and add 'On Touch Do'(OnDo) directives on composites to play audio, video, show another image or display a web page. Such composites are collectively, in general, referred to as 'Composite(s)' below.

Composite library can be searched on: location by address, latitude/longitude, or a caption.

Share the composite image via e-mail or Bluetooth in multimedia rich proprietary format, or as a PDF, or image.

Panoploid also helps you capture panoramic views by automatically positioning, sizing and orienting individual photos(max 5) approximately.

Composites can be edited on the spot while capturing or any other time later.

A set of composites s can be collected in a 'Portfolio' and saved.

Panoploid manages all of your media resources optimally without duplicating them if possible.

Panoploid does not force a workflow or a method. Any moment during capture or creation or modification is the same as any other and all operations are available all the time.

Panoploid stores content in a device independent format. This currently means that whenever a composite is edited, modified, and stored back, the changes are applied on the original to maximize the resolution of the result. Looking ahead, it means that should we release Panoploid on devices with higher resolution, your current content can be presented on the device with the device native resolution.

Panoploid uses database technology to store the contents. Therefore it is fast, responsive and, searchable.

Panoploid is built 100% on native iPhone technologies: there are no other third party software or software ported over from other platforms.

In Panoploid, what a gesture means is determined by context(graphics, maps, etc.,)as well as settings. This prevents us from having to invent arbitrary distinct gesture for each operation. But it also means that one needs to be aware of the context and settings that might affect a gesture. For example, in graphics workspace, you can create a rectangle, an ellipse, a filled rectangle or, a filled ellipse all with two touches. What gets created depends on the settings.

Therefore, we strongly recommend that you at least cursorily go through the 4 pages of info before starting in order to be more productive as well as for a better experience at:
http://www.ipanoramii.com

For questions/comments e-mail: info.protolys@gmail.com.

Quick Reference:

Deletion:
In Composite workspace, pressing trash button lets you either delete an individual item or all of them depending on mode.

Gestures
Zoom is available in all tabs when appropriate.
Rotate: Keep one touch fixed and move the second touch around.
Frame: Move two touches a distance apart horizontally or vertically on the composite in edit mode in the Composite tab.

Drag with single touch

Graphical gestures

Line:
Two simultaneous touches for the two end points of the line, in open, non-smooth mode.

Rectangle: Same as for a line in closed mode.
Circle and ellipses: the touches for the rectangle which will inscribe it in closed mode.

Filled figures: Same as for closed figure with 'Filled' setting ON.

Track mode: Tracks the touches and create a series of geometries.

On a Composite in the Library:
Right swipe: Sends(via e-mail or bluetooth).
Left swipe : Moves it to the Composite tab.

Single touch on an item in Library will toggle between the composite and its image super imposed on the world map..
Pressing the target corner again to delete it.

Neuheiten

Version 9.1.14

AirPrint a composite or a Portfolio from the Library(right swipe on the item and choose the print option)
Previously
—————
Copy/paste: touch on the composite workspace. If the composite has content, Select, SelectAll, Copy are available.
Printing: In the composite workspace, Send shows an option to send to Printer
Release note is available in the 'Contact' workspace.

- When sending portfolio or composite in panoply format
the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression.

- Media on annotations('Note')s.

- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.

- You can still attach a media to component itself in addition to the media associated with its notes.

- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.

When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.

The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).

Portfolio navigation has additional option : NavigateTo to index to another portfolio

Selection of color from photo is now incorporated into the color picker.

For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).

A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.

Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.

Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.

See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)

App-Datenschutz

Der Entwickler (Protolys Inc.) hat Apple keine Details über seine Datenschutzpraktiken und seinen Umgang mit Daten zur Verfügung gestellt.

Keine Details angegeben

Der Entwickler muss bei der Übermittlung seiner nächsten App-Aktualisierung Angaben zum Datenschutz machen.

Informationen

Anbieter
Protolys Inc.
Größe
61.8 MB
Kompatibilität

Erfordert iOS 9.0 oder neuer. Kompatibel mit iPad Air, iPad Air Wi‑Fi + Cellular, iPad mini 2, iPad mini 2 Wi‑Fi + Cellular, iPad Air 2, iPad Air 2 Wi‑Fi + Cellular, iPad mini 3, iPad mini 3 Wi‑Fi + Cellular, iPad mini 4, iPad mini 4 Wi‑Fi + Cellular, 12,9" iPad Pro, 12,9" iPad Pro Wi‑Fi + Cellular, 9,7" iPad Pro, 9,7" iPad Pro Wi‑Fi + Cellular, iPad (5. Generation), iPad (5. Generation) Wi‑Fi + Cellular, 12,9" iPad Pro (2. Generation), 12,9" iPad Pro (2. Generation) Wi‑Fi + Cellular, 10,5" iPad Pro, 10,5" iPad Pro Wi‑Fi + Cellular, iPad (6. Generation), iPad (6. Generation) Wi‑Fi + Cellular, 11" iPad Pro, 11" iPad Pro Wi‑Fi + Cellular, 12,9" iPad Pro (3. Generation), 12,9" iPad Pro (3. Generation) Wi‑Fi + Cellular, iPad mini (5. Generation), iPad mini (5. Generation) Wi‑Fi + Cellular, iPad Air (3. Generation), iPad Air (3. Generation) Wi‑Fi + Cellular, iPad (7. Generation), iPad (7. Generation) Wi‑Fi + Cellular, 11" iPad Pro (2. Generation), 11" iPad Pro (2. Generation) Wi‑Fi + Cellular, 12,9" iPad Pro (4. Generation), 12,9" iPad Pro (4. Generation) Wi‑Fi + Cellular, iPad Air (4. Generation), iPad Air (4. Generation) Wi‑Fi + Cellular, iPad (8. Generation) und iPad (8. Generation) Wi‑Fi + Cellular.

Sprachen

Englisch

Alter
4+
Copyright
Preis
Gratis
In‑App‑Käufe
  1. Maps in composite CHF 1.00
  2. Audio CHF 1.00
  3. Complete bundle. CHF 4.00

Support

  • Game Center

    Freunde herausfordern und Bestenlisten und Erfolge aufrufen.

  • Familienfreigabe

    Wenn die Familienfreigabe aktiviert ist, können bis zu sechs Familienmitglieder diese App verwenden.

Mehr von diesem Entwickler

Das gefällt dir vielleicht auch