![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
WilhelmSK 4+
Scott Bender
Conçu pour iPad
-
- CHF 20.00
Captures d’écran
Description
WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat.
WilhelmSK can connect to a Signal K server like the Signal K Node Server or a Signal K gateway like the iKommunicate.
It can also connect directly to some devices:
º NMEA 0183 over TCP or UDP. (from for example, Digital Yacht's Smart WLN10)
º Any modern Navico (Lowrance, Simnet or B&G) GoFree MFDs
º NMEA 2000 via Yacht Device's YDWG-02
º NMEA 2000 via Actisense W2k-1
º Victron Venus GX or CCGX
º Victron VRM
º Chetco SeaSmart Devices
º Chetco HelmSmart
RayMarine Auto Pilot Support (via node-server or the YDWG only)
º View or change current mode (Standby, Auto, Wind, Track)
º View current target heading or Wind direction
º Change target heading or Wind direction
º Acknowledge "Turn To Waypoint'
Active Captain:
º You can view Active Captain Points of Interest and review or comment on them.
º Go to Settings->Appearance to show Active Captain Points of Interest on the maps.
Alarms and Notifications
º View list of current current alarms
º Acknowledge RayMarine "Turn To Waypoint' *
º Push notification support *
º Setup server side alarms *
º Set an anchor alarm with the push of a button *
Navionics Maps
If you already have the Navionics Boating application with an active subscription, you can now use the same Navionics charts in WilhelmSK. Ensure you are a registered user with Navionics and have a Username and Password. If you have not registered, go to the Navionics Boating App’s Main Menu, click on the top “Me” option and then click Login. In WilhelmSK click the login button on the bottom right of the map and enter your Navionics login information.
Features:
- Raymarine MFD: display and interact with a RayMarine MFD (discovered via Bonjour)
- Fusion stereo (control zone volumes, source input, play, pause etc.)
- Create a gauge for any value available via SignalK
- Sophisticated anchor alarm (requires node server and signalk-anchoralarm-plugin)
- Customize gauge display using SignalK meta.zones
- Customize gauge range, min/max, etc.
- Save custom gauges to node server or the cloud for use on other devices
- Wind Angle gauges can optionaly be rotated so that they always point ot the bow of the boat, regaurless of device positioning
- Place gauges by long pressing on a gauge and choosing a differnt one
- Make a gauge full screen by double tapping
- Multiple layout support. Create a differnt layout for Steaming, Sailing, Home Monitoring, etc.
- Customize the nuber of pages and their layout
- Manuall connection configuration synced accross devices via iCloud
- Automatic connection selection based on current ip (usefull when Bonjour is not available and you have multiple boats)
- Two themes, dark and light
- Animated gauge needles
- iPad Slideover and Split View support (Your gauge configuration can be customized for these views)
- Connections can be configured to be refreshed manually or at a specific time interval
- Design your own custom gauge templates
- Share your custom templates via Air Drop, eMail, Text, etc.
- Edit ApplyTV or other device layouts and templates remotely using your iPhone or iPad
- Most gauges can be configured to be digital or analog
- Enter the SignalK path and title for any gauge to show data not supported by default
- Displays AIS targets in the Map views
- Configure node server plugins inside of the app
- IP and RTSP camera display
* Some advanced features require signalk-server-node and special plugins installed. Setup Instructions at https://github.com/sbender9/wilhelmsk-node-server-setup
Nouveautés
Version 1.16.2
1.16.2:
* Fixed when a new gauge is added to a templeate, existing pages don't get updated
* Fixed gauges get messed up when deleting a gauge from a template
* Added copy selected gauge settings when add a gauge in the template editor
1.16.1:
* Removed separate layouts for iPad split view
* Fixed make so swipe up/down in a Web Gauge does not switch layouts
* Fixed crash with Raymaine MFD when leaving WilhelmSK
* Fixed not reconnecting to Raymarine MFD when changing orientation
* Fixed layout label stays visible after swipe up/down
1.16.0:
* You can now swipe up or down to change layouts
* Last layout page is now remembered per layout
* Added option to some gauges to clear the display if freshness is old
* Added option to set the background color for freshness
* Added multiplier config for RPM Gauge
* Added options to specify switch orientation
* Added options to show Solar, DC Loads on Electrical Overview
* Added a fusion mute button to the top of main screen
* New freshness location, which is a square. Uses the border color instead of a dot
* Added option to hide the value label in Analog and Circle gauges
* Added option to hide the title inside of Circle gauges
* Added confirmation for setting the anchor alarm from the top bar
* Added Custom Themes
* Added configuration for border width
* Added configuration for border color
* Added configuration for border corner radius (this allows for round gauge borders)
* Added option to hide the controls on the WebGauge
* Fusion font and color can be configured
* Fixed not able to silence notifications that have multiple sources
* Fixed units labels on Bar and Text gauges are not effected by padding
* Spread the main screen anchor button farther away from the menu button
* Made gauge padding a percent instead of fixed pixels. Existing gauges with custom padding will remain the same until the padding is changed
* Fixed not recognizing some "warning" notifications as warnings
* Fixed decimial digits setting ignored in Wind Gauges
* Changed default decimal digits for analog wind gauges to 0
* Fixed some Fusion buttons not show showing pre iOS 16
* Make so image gauges are always in the background
* Fixed gauge padding ignored for bar gauges
* Fixed Electrical Overview frshness red when there are missing fields
Notes et avis
sehr gute App
Beste App um N2K mit dem iPad zu nutzen.
Fantastic
Undoubtedly the best way to upgrade your boat info system. With the Victron Cerbo integrating the SignalK server. It’s perfect. Also works really well with my regular NMEA 183 server. Highly recommended!
Confidentialité de l’app
Le développeur Scott Bender a indiqué que le traitement des données tel que décrit ci‑dessous pouvait figurer parmi les pratiques de l’app en matière de confidentialité. Pour en savoir plus, consultez la politique de confidentialité du développeur.
Données non collectées
Le développeur ne collecte aucune donnée avec cette app.
Les pratiques en matière de confidentialité peuvent varier, notamment en fonction des fonctionnalités que vous utilisez ou de votre âge. En savoir plus
Informations
- Fournisseur
- Scott Bender
- Taille
- 132,6 Mo
- Catégorie
- Navigation
- Compatibilité
-
- iPhone
- Nécessite iOS 13.0 ou version ultérieure.
- iPad
- Nécessite iPadOS 13.0 ou version ultérieure.
- iPod touch
- Nécessite iOS 13.0 ou version ultérieure.
- Mac
- Nécessite macOS 11.0 ou une version ultérieure et un Mac doté d’une puce Apple M1 ou une version ultérieure.
- Apple TV
- Nécessite tvOS 13.0 ou version ultérieure.
- Apple Watch
- Nécessite watchOS 4.0 ou version ultérieure.
- Apple Vision
- Nécessite visionOS 1.0 ou version ultérieure.
- Langues
-
Anglais
- Âge
- 4+
- Copyright
- © 2024 Scott Bender. All Rights Reserved
- Prix
- CHF 20.00
Prend en charge
-
Partage familial
Jusqu’à six membres de la famille peuvent utiliser cette app lorsque le partage familial est activé.