
GENNECT Cross 17+
HIOKI E.E. CORPORATION
专为 iPad 设计
-
- 免费
截屏
简介
This is the communication software for HIOKI Products (Bluetooth Low Energy models).
The GENNECT Cross is compatible with the following products.
Target Models:
- BT3554-50, BT3554-01(-11) BATTERY TESTER
- IR4057-50, IR4054-11, IR4058-20 INSULATION TESTER
- FT6380-50 CLAMP ON EARTH TESTER
- PD3259-50 DIGITAL PHASE DETECTOR
- CM4001,CM4002,CM4003 AC LEAKAGE CLAMP METER
- CM3286-01 AC CLAMP POWER METER
- CM4142 AC CLAMP METER
- CM4372, CM4374, CM4376 AC/DC CLAMP METER
- CM7291 DISPLAY UNIT
- FT3425 LUX METER
- FT4310 BYPASS DIODE TESTER
https://gennect.net/en/cross/index
Features:
- General Measurement : This function is useful when you would like to get the multiple data. You can connect multiple measurement instruments and save the data manually. The app's maximum number of instruments connection is 8, however some devices only allow to connect fewer measuring instruments simultaneously depending on their wireless connectivity. In addition, location information and photos can be saved with measured data.
- Logging(Recording) : This function automatically record the data up to a maximum of 24 hours, with the fastest interval of every 5 seconds and up to 8 channels simultaneously. It also allows you to record the data trend graph during a assigned period.
- Comparator : This function is used to judge whether the measured values are good or bad by the FAIL criteria.You can utilize several options to set the criteria, an arbitral value (for all models),a instrument-defined value (for FT4310, IR405X) and so on.
- Waveform/FFT : This function is used to capture the voltage waveforms(simple FFT) or current waveforms(simple FFT). You can also download INRUSH waveform from CM4142/CM437X.
- Battery : This function is used to record measurement data transferred from battery testers. The recorded data can be displayed in the graph or the list form. The battery number can be confirmed audibly by the Measurement Recording Guide function.
- Electric Theft Detection : This function is used to check the "Theft of Electricity" status by measuring current and power using CM3286-01. You can also create PDF reports including measurement data related with pictures and the map information. (needs the internet access.)
- Harmonic Analysis: This function is used to analyze the harmonics from 1 to 30th order. The level, content percentage of FND, total harmonic distortion(THD), harmonic graph and measured waveforms are displayed and recorded.
- Field Maintenance: This function is used to map measured values to arbitrary positions in the picture. You can also create templates in advance and load it later.
- Event Recording: This is a function that allows you to easily visualize when and how much measuring values exceeded the pre-set thresholds on your smartphone and tablet. This is ideal for troubleshooting of over load and leakage current and voltage drop, for example.
- Vector:This function allows you to display measured values and vector diagrams simultaneously and compare them with saved data.
Notice:
- This app needs to access the internet via a cellular network or Wi-Fi. Please note that you have to cover this access fee to the internet.
- This app uses the location information service (GPS).
- Please be sure to confirm the privacy polisy on the upper right of the [Other] screen and agree before using this app.
Contact form: https://www.hioki.com/contact
The copyright to the executable program file and associated documents is owned by HIOKI E.E. CORPORATION.
HIOKI reserves the right to make changes to the software specifications without any prior warning.
HIOKI disclaims any and all responsibility for any consequences arising out of use of this software.
新内容
版本 2.2.0
- Added "FT6041,IR5050,IR5051" to the supported models for the "Firmware upgrade for measuring instruments" function.
- Added "IR5050, IR5051" to the supported models for the "Memory Download" function.
- Added a feature to the Logging (Recording) data viewer that allows viewing of settings (such as Logging start/end time and Logging interval).
- Added a feature to set the report title display to either "Measurement Data Name," "Hide," or "Selected Data Title"
- Improved the "Illuminance Measurement Output Mode" in the "Field Maintenance" function.
- Added an "Automatic Save" function to the "Field Maintenance" function.
- Other minor improvements.
评分及评论
App 隐私
开发者“HIOKI E.E. CORPORATION”已表明该 App 的隐私规范可能包括了下述的数据处理方式。有关更多信息,请参阅开发者隐私政策。
与你关联的数据
开发者可能会收集以下数据,且数据与你的身份关联:
- 联系信息
- 用户内容
- 标识符
未与你关联的数据
开发者可能会收集以下数据,但数据不会关联你的身份:
- 位置
- 用户内容
- 使用数据
隐私处理规范可能基于你使用的功能或你的年龄等因素而有所不同。了解更多
信息
- 提供者
- HIOKI E.E. CORPORATION
- 大小
- 43.4 MB
- 类別
- 工具
- 兼容性
-
- iPhone
- 设备需装有 iOS 10.0 或更高版本。
- iPad
- 设备需装有 iPadOS 10.0 或更高版本。
- iPod touch
- 设备需装有 iOS 10.0 或更高版本。
- Mac
- 需要 macOS 11.0 或更高版本以及装有 Apple M1 或更高版本芯片的 Mac。
- Apple Vision
- 设备需装有 visionOS 1.0 或更高版本。
- 语言
-
印度尼西亚文、德文、意大利文、日文、法语、泰文、简体中文、繁体中文、英语、西班牙文、越南文、韩文
- 年龄分级
- 17+ 无限制网页访问
- Copyright
- © 2016 HIOKI E.E. CORPORATION All rights reserved.
- 价格
- 免费