AFRISOhome 4+

Name: AFRISOhome
Author: Codeatelier GmbH

Codeatelier GmbH

Diseñada para iPad

- Gratis

Descripción

The AFRISOhome principle:

1. Product(s)
With AFRISOhome, products from different radio technologies and manufacturers can be controlled and linked.
AFRISOhome supports EnOcean, Z-Wave, ZigBee and wireless M-Bus. The selection of compatible sensors and actors is continually extended. An overview of currently supported devices can be found here: www.afriso.de/afrisohome-whitelist.

2. AFRISOhome
The AFRISOhome Gateway can either be operated locally or integrated into an existing network structure via LAN or Wi-Fi.
A GSM variant is available for autonomous operation.
The collected data are stored exclusively on the AFRISOhome gateway to protect privacy.

3. App
Select the desired temperature, control your lighting, monitor the house technology and detect water leaks and fires - the complete home in one app.
Via intuitive if-then rules, recurring scenes can be easily automated.

28 feb 2024

Versión 2.40.1

## Changed
- When logging in, a warning is displayed if read-only mode (bug) occurs

## Devices
FlexTron (EnOcean):
- ALADIN Sendemodul
- ALADIN Funk-Bewegungsmelder
Shelly Wave (Z-Wave GEN7):
- Shelly Wave Shutter
- Shelly Wave 1
- Shelly Wave 1PM
- Shelly Wave 2PM
Shelly:
- Shelly Wall Display
- Shelly PM Mini (Gen 3)
- Shelly H&T (Gen 3)
- Shelly 1PM Mini Gen3
- Shelly 1 Mini Gen3
- Shelly PM Mini Gen3
- Shelly H&T Gen3
Andere:
- Fritz!DECT 440

## :bug: Bugfixes
- Shelly 1 no longer shows current consumption (Shelly 1 cannot measure this) *
- Shelly 3EM now correctly displays summed consumption and total consumption*
- Shelly 3EM can now also display negative consumption *
- Support for buttons on 2nd generation Shellies (e.g. Shelly Plus i4) *
- Double, triple and long click can now be used
- The status of the Shelly 2.5 in shutter mode is now displayed correctly
- On the Shelly TRV, the target temperature can now be set in 0.5° increments *
- Deactivating the watchdog now works on the Shelly TRV with an active heating plan; This means that a manually set target temperature is not immediately overwritten

**_For *: Device must be queried again using the WebApp_**

El desarrollador (Codeatelier GmbH) indicó que, entre las prácticas de privacidad de la app, pueden incluirse el manejo de datos que se describe a continuación. Para obtener detalles, consulta la política de privacidad del desarrollador.