W-Modbus 4+

LumenRadio AB

Σχεδιάστηκε για iPad

    • Δωρεάν

Στιγμιότυπα

Περιγραφή

The W-Modbus app has arrived! Upgrade firmware for LumenRadio W-Modbus devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which Modbus RTU address that is connected to that wireless node.

You can also connect to any node in the network and change their name (up to 20 characters).

The W-Modbus app requires W-Modbus firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.

Απόρρητο εφαρμογής

Ο δημιουργός «LumenRadio AB» υπέδειξε ότι οι πρακτικές απορρήτου της εφαρμογής ενδέχεται να περιλαμβάνουν τον χειρισμό δεδομένων όπως περιγράφεται παρακάτω.Για περισσότερες πληροφορίες, δείτε την πολιτική απορρήτου δημιουργού.

Δεν συλλέγονται δεδομένα

Ο δημιουργός δεν συλλέγει κανένα δεδομένο από αυτήν την εφαρμογή.

Οι πρακτικές απορρήτου μπορεί να διαφέρουν, για παράδειγμα, βάσει των δυνατοτήτων που χρησιμοποιείτε ή της ηλικίας σας. Μάθετε περισσότερα

Περισσότερα από αυτόν τον δημιουργό

W-DMX Configurator
Βοηθήματα
AirGlow
Βοηθήματα
CRMX Toolbox2
Βοηθήματα
CRMX Toolbox
Βοηθήματα
W-BACnet
Βοηθήματα
W-DALI
Εργασία

Ίσως σας αρέσει επίσης

ModMap
Βοηθήματα
mConnect Modbus TCP
Βοηθήματα
Dash IoT
Βοηθήματα
Regin:GO
Βοηθήματα
Motion Platform
Βοηθήματα
Unified-E
Βοηθήματα