Buderus EasyMode 4+
Bosch Thermotechnik GmbH
Designed for iPhone
-
- Free
iPhone Screenshots
Description
Buderus Logamatic TC 100 – smart control for heating and hot water
The Buderus Logamatic TC 100 is an internet-connected programmable smart thermostat for heating and hot water system control, which can be operated using the app EasyMode.
Once installing the app EasyMode, there is the option to run the app in demo mode, without access to the internet, a Buderus Logamatic TC 100 or a Buderus appliance, to showcase the extensive features and simplicity of use.
Simple to use
The Buderus Logamatic TC 100's intuitive operation and modern design ensures it is very simple to operate using either its built-in touch-screen or the app EasyMode.
• Supplied with a pre-set schedule that can then be easily modified to fit your needs.
• The Buderus Logamatic TC 100 features a ‘vacation mode’, requiring just a beginning and end date.
• An installation and operation manual is provided with each Buderus Logamatic TC 100 and there are helpful videos within the app EasyMode that provide further detail on specific functions.
Simply smarter
The Buderus Logamatic TC 100’s advanced programming via the app EasyMode enables it to have an ‘intelligent conversation’ with the boiler to take advantage of features which help improve energy efficiency, such as:
• Load and weather compensation which reduce the boiler water temperature to help further increase efficiency, while also increasing user comfort.
• Unlike other smart heating controls, the Buderus Logamatic TC 100 can also control your domestic hot water settings, helping provide additional energy savings and comfort.
• Visual representation of gas usage data can help you easily identify where potential savings could be made.
Want a Buderus Logamatic TC 100 for your home?
To take smarter control of your heating, first check if your Buderus boiler is compatible with the Buderus Logamatic TC 100 by visiting our web site.
The Buderus Logamatic TC 100 only requires a 2- wire connection between the control and the boiler; all other connections are made via the Wi-Fi network.
What’s New
Version 4.2.1
Fixed issue with home presence detection in iOS16
Ratings and Reviews
Übersichtlich aber etwas entscheidendes fehlt.
Die App ist übersichtlich gestaltet, die Anmeldung etwas aufwändig aber im großen und ganzen gut umgesetzt, Solange die Heizungsanlage funktioniert.
Ich ging eigentlich davon aus das mir das TC100 über die App auch ggf eine Meldung gibt sollte mal eine Störung vorliegen.
Bei mir der Fall, ein Temperaturfühler hat den Geist aufgegeben und die Anlage hat aus Sicherheitsgründen abgeschaltet, was ja auch sehr vernünftig ist, jedoch wird über das TC100 lediglich gemeldet, Heizung im "Standy-by", keine Warnmeldung, keine Fehleranzeige, nichts.
Zum Zeitpunkt als dies passiert ist war ich dienstlich unterwegs und es ist mir erst aufgefallen als die Temperatur im Haus bereits auf 13 Grad abgefallen ist.
Da besteht meiner Meinung nach Nachbesserungsbedarf, denn dafür ist dieses "Fernzugriff" doch eigentlichen gedacht, zur Kontrolle der Heizungsfunktion und diesem Fall hätte ich den Heizungsmonteur des Vertrauens noch während meiner Dienstreise beauftragen können.
Update
Super! Schnell auf das Problem reagiert! Danke!
Offenbar noch nicht fertig
Zunächst war der Anschluss des TC100 und die Einrichtung im WLan trotz eher dürftiger Anleitung sehr einfach und schnell erledigt.
Sehr gut finde ich die Verbrauchsanzeige und die Möglichkeit Einstellungen auf mehrere Tage zu übertragen.
Die app, wie auch der TC100 Regler lassen einige Funktionen die der vorher angeschlossene RC30 geboten hat, vermissen. Das ist an sich schon verwunderlich, wo doch einige Jahre Entwicklung dazwischen liegen.
Z.B:
- es nicht möglich die Warmwassertemperatur vorzugeben.
- Thermische Desinfektion wird nicht unterstützt. Mit RC30 kein Problem gewesen.
- Monitordaten wie Anzahl Brennerstarts, Brennerlaufzeit etc nicht mehr verfügbar.
Ausserdem ist die Hilfesektion in der App teilweise englisch, niederländisch und deutsch.
Wie ein anderer Rezensent bereits erwähnt hat, erscheint es mir nicht sinnvoll bei Anwesenheitserkennung zwingen ein anderes Programm definieren zu müssen als im Zeitprogramm. Warum kann ich hier nicht auf die Zeitprogramme zurückgreifen?
Das sind alles „nur“ Softwarefunktionen. Die HW des Kessels (GB132T) hat sich ja nicht geändert.
Ich habe das System derzeit im direkten Vergleich mit Tado (extension kit, Raumthermostate, Heizungsthermostate) laufen und muss sagen Buderus/Bosch verschenkt hier leider sehr viel wertvolles Potenzial.
App Privacy
The developer, Bosch Thermotechnik GmbH, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.
Data Not Collected
The developer does not collect any data from this app.
Privacy practices may vary based on, for example, the features you use or your age. Learn More
Information
- Provider
-
Bosch Thermotechnik GmbH has identified itself as a trader for this app and confirmed that this product or service complies with European Union law.
- Address
- Sophienstrasse 30-32 35576 Wetzlar Deutschland
- Phone Number
- +49 15234650538
- Shehryar.Khan@de.bosch.com
- Size
- 9.6 MB
- Category
- Utilities
- Compatibility
-
- iPhone
- Requires iOS 11.0 or later.
- iPod touch
- Requires iOS 11.0 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English, Bulgarian, Croatian, Dutch, Estonian, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Polish, Portuguese, Romanian, Russian, Serbian, Simplified Chinese, Slovenian, Spanish, Turkish
- Age Rating
- 4+
- Copyright
- © Bosch Thermotechnology
- Price
- Free