WilhelmSK 4+
Scott Bender
Entwickelt für iPad
-
- 22,99 €
Screenshots
Beschreibung
WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat.
WilhelmSK works best wth Signal K Server .
It can also connect directly to some devices:
º NMEA 0183 over TCP or UDP. (from for example, Digital Yacht's Smart WLN10)
º Any modern Navico (Lowrance, Simnet or B&G) GoFree MFDs
º NMEA 2000 via Yacht Device's YDWG-02
º NMEA 2000 via Actisense W2k-1
º Victron Venus GX or CCGX
º Victron VRM
º Chetco SeaSmart Devices
º Chetco HelmSmart
RayMarine Auto Pilot Support (via node-server or the YDWG only)
º View or change current mode (Standby, Auto, Wind, Track)
º View current target heading or Wind direction
º Change target heading or Wind direction
º Acknowledge "Turn To Waypoint'
Active Captain:
º You can view Active Captain Points of Interest and review or comment on them.
º Go to Settings->Appearance to show Active Captain Points of Interest on the maps.
Alarms and Notifications
º View list of current current alarms
º Acknowledge RayMarine "Turn To Waypoint' *
º Push notification support *
º Setup server side alarms *
º Set an anchor alarm with the push of a button *
Navionics Maps
If you already have the Navionics Boating application with an active subscription, you can now use the same Navionics charts in WilhelmSK. Ensure you are a registered user with Navionics and have a Username and Password. If you have not registered, go to the Navionics Boating App’s Main Menu, click on the top “Me” option and then click Login. In WilhelmSK click the login button on the bottom right of the map and enter your Navionics login information.
Features:
- Raymarine MFD: display and interact with a RayMarine MFD (discovered via Bonjour)
- Fusion stereo (control zone volumes, source input, play, pause etc.)
- Create a gauge for any value available via SignalK
- Sophisticated anchor alarm (requires node server and signalk-anchoralarm-plugin)
- Customize gauge display using SignalK meta.zones
- Customize gauge range, min/max, etc.
- Save custom gauges to node server or the cloud for use on other devices
- Wind Angle gauges can optionaly be rotated so that they always point ot the bow of the boat, regaurless of device positioning
- Place gauges by long pressing on a gauge and choosing a differnt one
- Make a gauge full screen by double tapping
- Multiple layout support. Create a differnt layout for Steaming, Sailing, Home Monitoring, etc.
- Customize the nuber of pages and their layout
- Manuall connection configuration synced accross devices via iCloud
- Automatic connection selection based on current ip (usefull when Bonjour is not available and you have multiple boats)
- Two themes, dark and light
- Animated gauge needles
- iPad Slideover and Split View support (Your gauge configuration can be customized for these views)
- Connections can be configured to be refreshed manually or at a specific time interval
- Design your own custom gauge templates
- Share your custom templates via Air Drop, eMail, Text, etc.
- Edit ApplyTV or other device layouts and templates remotely using your iPhone or iPad
- Most gauges can be configured to be digital or analog
- Enter the SignalK path and title for any gauge to show data not supported by default
- Displays AIS targets in the Map views
- Configure node server plugins inside of the app
- IP and RTSP camera display
* Some advanced features require signalk-server-node and special plugins installed. Setup Instructions at https://github.com/sbender9/wilhelmsk-node-server-setup
Neuheiten
Version 1.17.0
The Watch app has been completely re-written and now supports complications and widgets. Requires watchOS v9. Complications and widgets only work with a Signal K Server.
Introducing Widgets!
* Widgets are available on
* Home Screen,
* Lock Screen (including the line obove the time),
* StandBy Mode
* Today View
Shortcuts allowing buttons in Control Center, Automations, Siri Support
* Set A Multi Switch (set victron inverter on, charge only, etc)
* Flip A Switch (turn a switch on or off)
* Toggale A Switch (taggle the switch state)
* Launch WilhelmSK
* Drop/Set/Raise Anchor
* Control a fusion stereo
* Send a PUT to any path
* Get the value of a path
* Control the state and heading of an autopilot, advance waypoint
Builtin Siri Commands
* "Drop the anchor in WilhelmSK"
* "Raise the anchor in WilhelmSK"
* "Set the anchor in WilhelmSK"
* "Tack to port in WilhelmSK"
* "Tack to starboard in WilhelmSK"
* "Toggle the [switch displayName] in WilhelmSK"
* "Turn the Autipilot Ten Degrees To Port in WilhelmSK"
* "Turn the Autipilot One Degree To Starboard in WilhelmSK"
You can creat Shortcuts with different names, and you won't have to say "in WilhelmSK"
These new features only work with Signal K connections
Bewertungen und Rezensionen
Finally
Finally I found what I was looking for. A smart way to build a Cockpit instrument panel. On an iPad SideBySide with my navigation app it is a perfect solution. The settings need a bit of “getting used to” but then it is just great.
However there is one final function that would make this app even more better: recording signalK stream and uploading it somewhere. You can view and safe it but I would like to record it in the background (while viewing the instruments)
WilhelmSK - the jack knife
That’s the ultimate solution for me on our boat. A nice and clear looking display for almost everything. I even can display and control IoT devices with the web gauge or my Victron stuff with full control and show of all parameters, just like a CCGX.
There is not much I miss and if so, the author is really helpful and responsive. It only lacks of documentation. So you get to work your way through it until one day the docs are ready.
And until then I maybe have discovered only 50% of its potential.
Highly recommended and a must have if you are able to set up a SignalK server.
App-Datenschutz
Der Entwickler, Scott Bender, hat darauf hingewiesen, dass die Datenschutzrichtlinien der App den unten stehenden Umgang mit Daten einschließen können. Weitere Informationen findest du in den Datenschutzrichtlinien des Entwicklers.
Keine Daten erfasst
Der Entwickler erfasst keine Daten von dieser App.
Die Datenschutzpraktiken können zum Beispiel je nach den von dir verwendeten Funktionen oder deinem Alter variieren. Weitere Infos
Informationen
- Anbieter
- Scott Bender
- Größe
- 123,8 MB
- Kategorie
- Navigation
- Kompatibilität
-
- iPhone
- Erfordert iOS 13.0 oder neuer.
- iPad
- Erfordert iPadOS 13.0 oder neuer.
- iPod touch
- Erfordert iOS 13.0 oder neuer.
- Mac
- Erfordert macOS 11.0 (oder neuer) und einen Mac mit Apple M1-Chip (oder neuer).
- Apple TV
- Erfordert tvOS 13.0 oder neuer.
- Apple Watch
- Erfordert watchOS 11.0 oder neuer.
- Apple Vision
- Erfordert visionOS 1.0 oder neuer.
- Sprachen
-
Englisch
- Alter
- 4+
- Copyright
- © 2024 Scott Bender. All Rights Reserved
- Preis
- 22,99 €
Support
-
Familienfreigabe
Bis zu sechs Familienmitglieder können diese App bei aktivierter Familienfreigabe nutzen.