Jetting for Modena KZ Kart 4+
KK1, KK1R, MKZ & KK2 engines
ISEnet
Designed for iPad
-
- 49,00 kr
Screenshots
Description
The easiest-to-use application for adjusting the carburetor of Modena kart engines. Developed and verified in competition.
Jetting for Modena KK1, KK1R, MKZ & KK2 is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc.), a jetting recommendation for go-karts with Modena KK1, KK1R, MKZ and KK2 engines (ICC / KZ1 / KZ2 karting engines).
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, a recommended jetting setup is shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). In addition, this tab lets do a fine tunning adjustment for the main (high) and needle (mid) circuits to adapt to the concrete engine.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you should set in this screen the information about the engine and the carburator (Dellorto VHSH 30), that is, the engine model (Modena KK1, KK1R, MKZ and KK2), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long). Depending of the track type, the jetting setups will be adapted.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
What’s New
Version 1.4
Minor adjustment in the calculation model of the KK1R engine after testing on the dynamometer.
App Privacy
The developer, ISEnet, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
- Location
- Identifiers
Privacy practices may vary based on, for example, the features you use or your age. Learn More
Information
- Provider
-
Ingenieria del Software ISEnet S.L. has identified itself as a trader for this app and confirmed that this product or service complies with European Union law.
- DUNS Number
- 460049962
- Address
- Calle De Las Moreras, 25 - A 1 B 28300 Aranjuez Madrid Spain
- Phone Number
- +34 600430897
- mobile@isenet.es
- Size
- 2.6 MB
- Category
- Sports
- Compatibility
-
- iPhone
- Requires iOS 12.1 or later.
- iPad
- Requires iPadOS 12.1 or later.
- iPod touch
- Requires iOS 12.1 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English, Arabic, Czech, Danish, Dutch, Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Norwegian Bokmål, Polish, Portuguese, Romanian, Simplified Chinese, Slovak, Spanish, Swedish, Thai, Traditional Chinese, Turkish, Ukrainian, Vietnamese
- Age Rating
- 4+
- Copyright
- © 2023 Ingeniería del Software ISEnet S.L.
- Price
- 49,00 kr
Supports
-
Family Sharing
Up to six family members can use this app with Family Sharing enabled.