iCircuit 4+

Krueger Systems, Inc.

Diseñado para iPad

    • 14,99 €
    • Ofrece compras dentro de la app

Capturas de pantalla

Descripción

iCircuit is the premier iPad and iPhone app for designing and experimenting with circuits and Arduinos. Its advanced simulation engine can handle both analog and digital circuits and features realtime always-on analysis. It is the perfect companion to students, hobbyists, and engineers.

You use it as you would any CAD program: you add elements, connect them together, and set their properties.

But iCircuit is unlike other CAD programs because it is always simulating. It's just like working with the real circuit. You do not stop to take a measurement or spend a lot of time configuring reports. Instead, you just play with the circuit as you normally would, with the power on!

There are over 300 elements you can use to build your circuits. The app has everything from a programmable Arduino, to simple resistors, to switches, to MOSFETS, to digital gates.

The app features a multimeter that you use to probe around the circuit to instantly read voltages and currents. If you want to see how a value changes over time, then you can add values to the built-in oscilloscope. The scope can simultaneously track many signals over time and features a touch interface to control the total time displayed and stacked and unstacked modes to easily compare signals. The scope can also display the Fourier transform of any signal so that you can see the performance of filters.

Supported elements include:

• Programmable Arduino using a subset of the C programming language
• Programmable PIC controllers using assembly language or hex files
• Signal generators, Voltage sources, Current sources, and Dependent sources
• Resistors, Capacitors, and Inductors
• Manual SPST/SPDT and DPST/DPDT Switches, Push buttons, and Relays
• LEDs, Diodes, BJ Transistors, and MOSFETs, Thermistors
• Triodes and tetrodes
• Audio simulation with Speakers, Microphones, Buzzers, and LEDs
• DC Motors and Servos
• ADCs, and DACs
• Logic gates: AND, OR, NAND, NOR, XOR
• JK and D Flip-flops
• 180 digital ICs from the 4000 and 7400 series
• 78xx and LM317 voltage regulators
• 7-segment and matrix displays
• Antenna with simulated AM and FM signals

You can also create sub circuits to introduce new elements and componentize your designs.

No matter your skill set, you'll be playing with circuits in no time with iCircuit.

Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Novedades

Versión 1.14.2

1.14.2 Fixes crashes when WiFi is disabled

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:


Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification

Valoraciones y reseñas

3,6 de 5
9 valoraciones

9 valoraciones

Charly_C_G ,

Menuda basura

Si quieres un simulador q represente pilas y resistencias bien pero si vas a profundizar olvídate,funciona de culo le pones elementos no liniales tan simples como diodos y ya se raya empieza a darte inconcluencias e historias q sabes q estan mal a eso si los ejemplos q el te pone muy guapos,y si representas un circuito con un mínimo de complejidad a frecuencias en plan de más de 50 Hz olvídate de ver la función porq la función se ve distorsionada y no aporta ningún tipo de valor.En conclusión creía q por 9 pavos había comprado un simulador de la ostia y tengo aquí una basura de programa,vamos q me años timado.A ver si lo actualizan y le corrigen los 2000 errores q tiene.

alexprk61 ,

No la compréis, es un auténtico despropósito.

La aplicación no funciona correctamente (iPad Pro 2019). Además no te permite realizar muchos circuitos de lo más simple, las simulaciones son de pena, y por si fuera poco se cuelga cada dos por tres dejando de funcionar los circuitos. Una auténtica bazofia. 12€ tirados a la basura. Y sobre todo resaltar lo ya dicho, compré la aplicación para poder hacer simulaciones de circuitos muy simples antes de montarlos en la realidad, y ha sido totalmente inservible.

Marshall100W. ,

Muy útil.

Me encanta, me parece muy útil, muy práctica, me ayuda a practicar los conocimientos que voy adquiriendo y me ayuda mucho a comprender algunos circuitos y sus componentes.

Privacidad de la app

El desarrollador, Krueger Systems, Inc., ha indicado que las prácticas de privacidad de la app pueden incluir la gestión de datos descrita a continuación. Para obtener más información, consulta la política de privacidad del desarrollador.

Datos no vinculados contigo

Los siguientes datos pueden recopilarse, pero no se vinculan con tu identidad:

  • Diagnósticos

Las prácticas de privacidad pueden variar, por ejemplo, dependiendo de tu edad o de las funciones que uses. Más información

Más de este desarrollador

Continuous .NET C# and F# IDE
Para desarrolladores
Calca
Productividad
iCircuit 3D
Educación
Math Agility
Educación
Live Spectrogram
Utilidades
Mocast
Noticias

También te puede interesar

Electronic Toolbox Pro
Productividad
EE ToolKit PRO
Productividad
CircuitShepherd
Productividad
EE ToolKit PRO for iPad
Productividad
Electronics Engineer Helper
Productividad
Mouser
Productividad