Geode Connect 4+
Juniper Systems Inc.
Suunniteltu iPadille
-
- Ilmaiset
Näyttökuvat
Kuvaus
GEODE CONNECT is a configuration and communication utility for the GEODE GNSS RECEIVER. It provides the ability to establish communications to the Geode Real-Time Sub-meter GPS/GNSS Receiver, change receiver settings, and displays position, altitude, estimated horizontal error, differential status fix info, speed, heading, satellites in fix and PDOP. Using the Configure Receiver settings menu, select SBAS, Atlas® L-Band, or NTRIP-delivered RTK Float corrections for selectable accuracy to fit your job. The Skyplot screen shows satellites in use for the various supported constellations and their distribution in the sky. A terminal screen is included to allow users a “deep dive” into the actual data output from the receiver, and direct command access. The Receiver Configuration menu provides the ability to control a wide range of receiver settings to suit your work environment.
REAL-TIME SCALABLE ACCURACY GNSS RECEIVER
Looking for a simple yet precise GNSS solution at an affordable price? With the Geode, you can easily collect real-time, sub-meter, sub-foot or decimeter accurate GNSS data without the huge price tag or complexity of other precision receivers. Designed with versatility in mind, the Geode works with a wide range of devices to fit your needs exactly, and is especially useful for bring-your-own-device workplaces. Take the Geode with you mounted on a pole, in a pack, or held in your hand to collect real-time precise GNSS data in harsh environments, using almost any handheld device. For information on the Geode GPS Receiver, visit our product page at www.junipersys.com.
Disclaimer:
Using the Geode Connect software and a Bluetooth connection to the Geode receiver continuously will increase consumption of battery power on your mobile device.
Uutta
Versio 2.3.6.0
• Incorrect sign issue for latitude and longitude values between -1 and 0° has been resolved.
• Geode Connect establishes a Bluetooth connection to a previously paired but disconnected Geode only while the app is open.
Use Geode Connect for Windows to install the Geode Bluetooth firmware version 2.1.5 to implement the following updates.
• Allow Blue LED to work with iOS Location Services.
• Improved connection stability when using the Geode for long periods of time on iOS.
• Location Services no longer causes failures on iOS when running at greater than 1 Hz.
Apin tietosuoja
Kehittäjä (Juniper Systems Inc.) ilmoitti, että apin tietosuojakäytänteet voivat sisältää tietojen käsittelyä alla kuvatulla tavalla. Katso lisätietoja kehittäjän tietosuojakäytännöstä.
Sinuun yhdistetyt tiedot
Seuraavia tietoja voidaan kerätä ja ne voidaan yhdistää henkilöllisyyteesi:
- Käyttäjäsisältö
Sinuun yhdistämättömät tiedot
Seuraavia tietoja voidaan kerätä, mutta niitä ei yhdistetä henkilöllisyyteesi:
- Vianmääritystiedot
Tietosuojakäytänteet voivat vaihdella esimerkiksi käyttämiesi ominaisuuksien tai ikäsi mukaan. Lisätietoja
Tiedot
- Tarjoaja
-
Juniper Systems, Inc. on tunnistautunut tämän apin kauppiaaksi ja vahvistanut, että tuote tai palvelu noudattaa Euroopan unionin lakia.
- DUNS-numero
- 041738340
- Osoite
- 1132 W 1700 N LOGAN Utah 843211723 Yhdysvallat
- Puhelinnumero
- +1 4357531881
- Sähköposti
- ComplianceTeam@junipersys.com
- Koko
- 60 Mt
- Kategoria
- Apuapit
- Yhteensopivuus
-
- iPhone
- Vaatii käyttöjärjestelmäversion iOS 10.0 tai uudemman.
- iPad
- Vaatii käyttöjärjestelmäversion iPadOS 10.0 tai uudemman.
- iPod touch
- Vaatii käyttöjärjestelmäversion iOS 10.0 tai uudemman.
- Mac
- Vaatii Macin, jossa on macOS 11.0 tai uudempi ja Applen M1‑siru tai uudempi.
- Kielet
- Ikäraja
- 4+
- Sijainti
- Tämä appi voi käyttää sijaintiasi, vaikka se ei olisi auki. Taustakäyttö voi kuluttaa laitteen akkua.
- Tekijänoikeus
- © 2024 Juniper Systems, Inc.
- Hinta
- Ilmaiset