- iOS26 is now supported. - Improved user interfaces. - General bug fixes.

■New features - A 46-30T front chainring combination can now be set in the synchronized shift settings for FD-RX825. ■Others - Fixed the issue where the semi-synchronized shift setting cannot be configured correctly. - Fixed identified issues.

■New features - The image display range can now be adjusted when you register a Mybike image. ■Other - Screen display usability has been improved. - Fixed identified issues.

The app has been updated to support Google system changes.

・ The "assist carry over function" has been added to the assist settings. (Applicable models: DU-EP801) * ・ The "assist cutoff function" has been added to the assist settings. (Applicable models: DU-EP801/DU-EP600) * *Updating the firmware on the applicable models is required to use this function. ・ A Feedback function for this application has been added. ・ General bug fixes.

■New features - Adapted for DU-EP500/DU-E5100. - Adapted for RD-U8050/MU-UR520/SW-EN605-R. - Auto-learning function has been added to auto shift of internal shifting units. (Applicable models: DU-EP801/DU-EP801-CRG/DU-EP600/DU-EP600-CRG/DU-EP500) *1 - Custom settings in Mybike can now be viewed or preset even when the app is not connected to the bike. The preset Custom settings are applied when the app is connected to the bike. *1 Updating the firmware on the applicable models is required to use this function. ■ Others - The user interfaces of the application have been improved. - General bug fixes.

■ Changes - User interfaces for auto shift have been improved. ■ Others - General bug fixes.

■New features - FC-R9200-PX is now supported. ■ Others - General bug fixes."

■ Changes - Settings for improved power measurement accuracy can now be configured on the app by pairing a SHIMANO power meter* with a compatible Di2 rear derailleur*. *FC-R9200-P/FC-R8100-P/RD-R9250/RD-R8150/RD-R7150 - iOS 17 is now supported. - Support for iOS 14 has ended. ■ Fixed issue - General bug fixes.

■ Changes​ - For the users changing the smartphones/devices, the passkey for the wireless unit will be transferred to a new smartphone when replacing the current smartphone.​ 　　* Must use the same SHIMANO ID to log in to the app. ​ ■ Others​ - Improved user interfaces. ​ - Fixed identified issues.​ ​ To comply with applicable laws and regulations, there will be a delay in releasing the app for iOS in France. We will release the app as soon as possible. We appreciate your patience.

The issue that the application crashes on startup has been resolved.

■ Fixed Issues - The issue where the information registered in Mybike was not displayed has been fixed. - The issue with the settings file for assist profile and SHIMANO SYNCHRONIZED SHIFT has been fixed.

■ Changes - iOS 16 is now supported. - The settable ranges for climbing responsiveness and gear shifting timing of DU-EP801/600 have been expanded. - A function that displays the information of connected third-party products has been added. ■ Others - Improved user interfaces. - Fixed identified issues. ■ About SHIMANO ID* On January 31, 2023, SHIMANO ID* became available in the following countries. Brazil, Indonesia, Israel, Korea, Thailand, and Turkey * Creating an account that can be used with SHIMANO applications will give you access to more features such as registering your bike information and sharing your data with other SHIMANO applications.

The issue that the application crashes on startup has been resolved. To comply with applicable laws and regulations, there will be a delay in releasing the app in France. We will release the app as soon as possible. We appreciate your patience.

■ New features - New features of the new EP801/EP600 series products are now supported. ■ Fixed issues - General bug fixes

■ New features Adapted for R7150 series. ■ Fixed issues General bug fixes.

E-TUBE PROJECT Cyclist Ver.5.0.4 has been released. - Improved user interfaces. - General bug fixes.

- Added traditional Chinese. - Adapted to display the usage ratio of each gear when using BT-DN300. - General improvements.

Pairing operation process of rear derailleur and dual control lever of some units cannot be completed, when the firmware version of ST-R9270 is lower than ver. 4.0.2. * Connect the rear derailleur to the dual control lever with a cable and update the firmware, then perform paring. Update: https://si.shimano.com/iUM/7J4WA/update/toc_task_nnp_xs2_g4b Pairing: https://si.shimano.com/iUM/7J4WA/pairing_process/TOC_PAIRING_PROCESS

■ New features ･ Adapted for new DURA-ACE R9250/ULTEGRA R8150 Series. ･ Profile images can now be added to your SHIMANO ID account. ■ Changes ･ Moved the help screen to the browser. ･ Application name will change from "E-TUBE PROJECT for mobile" to "E-TUBE PROJECT Cyclist" from version 5.0.0. ･ General bug fixes.

1) Adapted for cargo DU or MU-UR510. 2) Added new firmware download function that allows the user to download the product firmware when needed. 3) Improved the switch customization display by highlighting the switch buttons. 4) New drive units added for error log list. (DU-E6100, DU-E6110, DU-E6180, DU-E6100-CRG, DU-E7000, DU-E5000, DU-E5080, DU-E5080-H, DU-EP800-CRG). 5) Improved the ON/OFF slide switch visibility for the information display. For more information including compatibility, as well as operating instructions, please check here. https://bike.shimano.com/e-tube/project/formobile.html

-iOS14 is now supported. -The error log display function (for DU-EP800) has been added.

・Bug fixes the long update time occurred on the initial screen. ・Bug fixes the issue with SHIMANO ID PORTAL function that cannot be used when selecting some countries. Please make sure to update to the latest version.

Adapted for EP8 Series (DU-EP800/SC-EM800/SW-EM800-L/EW-SW300) -New simply user interface layout.(Current settings summary can be seen on the top page.) -Update information is now displayed.(Firmware update information will pop-up when available.) -Possible to connect with registered bicycle.( *All functions can be fully used by registering at SHIMANO ID)

Bug fixes the issue of current E-TUBE PROJECT for Tablet/Smartphone (Ver.3.4.3) for iOS that cannot proceed the connection with Bluetooth after iOS 13.