Jetting TM Kart for KZ / ICC 4+

KZ-R1, all KZ10 & K9 engines

ISEnet

Designed for iPad

    • USD 7.99

Screenshots

Description

The easiest app for tuning TM kart engines' carburetors. Developed and race-tested.

This app provides, for the current weather conditions and a given engine configuration (engine model, floats, etc.), four jetting recommendations for TM K9, K9B, K9C, KZ10, KZ10B, KZ10C and KZ-R1 engines that have DellOrto VHSHS30 carbs.

In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.

The application is made up of four tabs that are described next:

- Results: in this tab, four different jetting setups are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). Under the recommended main jet, the calculated real value with decimals is shown. Besides this jetting information, the air density, density altitude and relative horsepower are shown too. In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits for each jetting setup to adapt to the concrete engine.

- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).

- Engine: you can configure in this screen the information about the engine, that is, the engine model (K9, K9B, K9C, KZ10, KZ10B, KZ10C, KZ-R1), the float type and height, the oil mix ratio and the type of the circuit (spring or road racing, short or long). Depending of the track type, the jetting setups will be adapted.

- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

What’s New

Version 1.9

Improved service for obtaining weather information.
Minor changes in user interface.
Performance optimizations.

App Privacy

The developer, ISEnet, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

Data Not Linked to You

The following data may be collected but it is not linked to your identity:

  • Location
  • Identifiers
  • Diagnostics

Privacy practices may vary based on, for example, the features you use or your age. Learn More

Supports

  • Family Sharing

    Up to six family members can use this app with Family Sharing enabled.

More By This Developer

Jetting for DellOrto VHSB PRO
Sports
Jetting for DellOrto VHSH PRO
Sports
Jetting for Vortex KZ Kart
Sports
Jetting for Husqvarna 2T
Sports
Jetting for IAME kart engines
Sports
Jetting for IAME KZ Kart
Sports

You Might Also Like

Jetting for TM KZ / ICC Kart
Sports
Jetting Modena KZ1 / KZ2 Kart
Sports
Jetting IAME KZ1 / KZ2 Kart
Sports
Jetting for IAME X30 Karting
Sports
Jetting Rotax Max Kart
Sports
Jetting Vortex KZ1 / KZ2 Kart
Sports