![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
Jetting for Vortex KZ Kart 4+
ISEnet
專為 iPad 設計
-
- HK$ 48.00
螢幕截圖
描述
Jetting for Vortex RVS, RVX, RVXX, RVZ, RKZ, RSZ, RTZ & VTZ is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc.), a jetting recommendation for go-karts with Vortex RVS, RVX, RVXX, RVZ, RKZ, RSZ, RTZ and VTZ engines (ICC / KZ1 / KZ2 karting engines).
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, a recommended jetting setup is shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). In addition, this tab lets do a fine tunning adjustment for the main (high) and needle (mid) circuits to adapt to the concrete engine.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you should set in this screen the information about the engine and the carburator (Dellorto VHSH 30 / PHBE 30), that is, the engine model (Vortex RVS, RVXX, RVX, RVZ, RKZ, RSZ, RTZ and VTZ), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long). Depending of the track type, the jetting setups will be adapted.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
最新功能
版本 1.2
The VTZ engine has been added.
App 私隱
開發者表明ISEnet的私隱慣例或包括下列資料的處理。詳情請參閱開發者的私隱政策。
不會與你連結的資料
開發者可能會收集以下資料,但不會連結你的個人身份:
- 位置
- 識別碼
私隱慣例或因使用的功能或年齡等因素而異。進一步了解
資料
- 供應商
- Ingenieria del Software ISEnet S.L.
- 大小
- 3 MB
- 類別
- 運動
- 兼容性
-
- iPhone
- 須使用 iOS 12.1 或以上版本。
- iPad
- 須使用 iPadOS 12.1 或以上版本。
- iPod touch
- 須使用 iOS 12.1 或以上版本。
- Mac
- 須使用 macOS 11.0 或以上版本及配備 Apple M1 或以上版本晶片的 Mac。
- Apple Vision
- 須使用 visionOS 1.0 或以上版本。
- 語言
-
丹麥文、匈牙利文、印尼文、土耳其文、巴克摩挪威文、希伯來文、希臘文、德文、意大利文、捷克文、斯洛伐克文、日文、法文、波蘭文、泰文、烏克蘭文、瑞典文、簡體中文、繁體中文、羅馬尼亞文、芬蘭文、英文、荷蘭文、葡萄牙文、西班牙文、越南文、阿拉伯文、韓文、馬來文
- 年齡
- 4+
- Copyright
- © 2017 Ingeniería del Software ISEnet S.L.
- 價格
- HK$ 48.00
支援
-
家人共享
啟用「家人共享」後,多達六位家庭成員可以使用此 App。