W-Modbus 4+
LumenRadio AB
專為 iPad 設計
-
- 免費
螢幕截圖
描述
The W-Modbus app has arrived! Upgrade firmware for LumenRadio W-Modbus devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which Modbus RTU address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-Modbus app requires W-Modbus firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
App 私隱
開發者表明LumenRadio AB的私隱慣例或包括下列資料的處理。詳情請參閱開發者的私隱政策。
不收集資料
開發者不會從此 App 收集任何資料。
私隱慣例或因使用的功能或年齡等因素而異。進一步了解
資料
- 供應商
- LumenRadio AB
- 大小
- 44.6 MB
- 類別
- 工具程式
- 兼容性
-
- iPhone
- 須使用 iOS 11.0 或以上版本。
- iPad
- 須使用 iPadOS 11.0 或以上版本。
- iPod touch
- 須使用 iOS 11.0 或以上版本。
- Mac
- 須使用 macOS 11.0 或以上版本及配備 Apple M1 或以上版本晶片的 Mac。
- Apple Vision
- 須使用 visionOS 1.0 或以上版本。
- 語言
-
英文
- 年齡
- 4+
- Copyright
- © 2023 LumenRadio AB
- 價格
- 免費