sCS commissioning 4+

Tridonic

    • Gratis

Jepretan Layar

Deskripsi

The sceneCOM S commissioning app has been specially developed to help make commissioning the sceneCOM S lighting control system intuitive. The DALI-2-based, scalable lighting control system which is covers variety of applications: from complex stand-alone luminaire setups to small to medium building areas encompasses a wide range of functions – from simple switching on and off and dimming/brightening to daylight linking – even with Tunable White lighting – and individual lighting scenarios.
Each system supports up to 64 DALI 1 or DALI 2-based LED drivers and 16 input devices such as sensors or momentary-action switches. A single DALI LED driver or control device can therefore belong to several groups and thus various scenes.  

Individual luminaire setups can be as well quiet complex and consist of up to 4 independent light heads with multiple drivers, groups and control devices like sensors and push button interfaces. Lighting manufacturers are able to create various luminaire setups using new Free-standing luminaire (FSL) configurator.  

With the latest release sCS Comissioning APP is able to bring advantages of dynamic time-based lighting to our customers as new sceneCOM S RTC hardware support highly accurate real time clock. Now it is possible to assign different Human Centric Lighting profiles to one or multiple groups with Tunable White luminaries.
The app is so intuitive to use, commissioning can be completed in just four simple steps. A particularly practical feature is Bluetooth, which enables unlimited use of the app even in offline mode.

Step 1: Create
In the first step, the new project is created. The basis for this can be either a new floor plan or a cloned layout. Luminaires are grouped and planned with corresponding light scenes.

Step 2: Connect and identify
Once the sceneCOM S commissioning app is connected to the sceneCOM S application controller, the system components (e.g. LED drivers, sensors or switches) in the app are automatically addressed. Easy device identification with the single touch of the device icon or single press of the switch push button.

Step 3: Plan
Using drag and drop, system components such as luminaires, sensors and momentary-action switches can now be placed in the floor plan and assigned to the various groups.

Step 4: Configure
The desired functions can then be defined and assigned. Finally, the project can be PIN-protected.
Completed projects and templates can be shared or copied and pasted to other projects. An over-the-air update ensures that the software is always up to date.

Yang Baru

Versi 2.0.3

• Updated workflow for user Authentication when connecting for the first time with the sceneCOM S , on first connect user must change the default PIN. With this Update the product reaches the PSTI Security Requirements for UK.
• Scenes can now also be programmed as OFF.
• MSensors can now be replaced with different MSensor type, without the need of full recommissioning.

Privasi App

Pengembang, Tridonic, menunjukkan bahwa praktik privasi app dapat menyertakan penanganan data sebagaimana yang dijelaskan di bawah. Untuk informasi lebih lanjut, lihat kebijakan privasi pengembang.

Data yang Tidak Ditautkan ke Anda

Data berikut ini mungkin akan dikumpulkan, namun tidak ditautkan ke identitas Anda:

  • Data Penggunaan
  • Diagnostik

Praktik privasi mungkin bervariasi, misalnya, praktik privasi berdasarkan fitur yang digunakan atau usia Anda. Pelajari Lebih Lanjut

Lainnya oleh Pengembang Ini

4remote BT
Produktivitas
4service NFC
Produktivitas
Events Tridonic
Bisnis
connecDIMLite
Kegunaan
sCS Remote
Kegunaan
connecDIM Architect
Kegunaan

Anda Juga Mungkin Menyukai

DIMLITE pro commissioning
Kegunaan
PROset App
Kegunaan
DIMLITE pro G2 Remote
Kegunaan
DALI Cockpit Mobile
Kegunaan
Zumtobel nBox
Kegunaan
Tuner4TRONIC Field
Kegunaan