rtl_tcp SDR 4+
RTL-SDR Software Defined Radio
HotPaw Productions
-
- 9,99 €
Screenshots
Description
An RTL-SDR Software Defined Radio receiver app for iOS devices. Listen to AM, FM, SSB and CW radio signals. View an RF spectrum and waterfall. Connect, via the rtl_tcp network protocol, to networked RTL-SDR USB peripherals.
This app requires an external rtl_tcp server. iOS devices do not currently support the direct connection of USB peripherals such as an RTL-SDR. Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to act, essentially, as the USB port adapter for your iOS device. The rtl_tcp SDR app can also connect to hfp_tcp for the Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for the LimeSDR Mini; see GitHub for server source code. This app can also connect to a Hermes Lite 2 QRP transceiver directly, if it has a known IP address, or through an hl2_tcp server.
No support is provided for installing any of the rtl_tcp or other tcp software needed to use this app (with a Raspberry Pi, or otherwise). Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent USB SDR peripheral, and have already installed and tested rtl_tcp on your Raspberry Pi, Mac, or other server. Note that this app requires a very high bandwidth network connection in order to receive streams of real-time RF samples from an RTL-SDR. It is recommended that your rtl_tcp server be on a wired connection rather than on the same WiFi as your iOS device.
What’s New
Version 1.5.2
Stability enhancements and Bug fixes (FM audio spectrum, SSB, noise reduction, and audio limiter)
Ratings and Reviews
Good but need improvement
it works quite well, it needs some modifications to make the controls for modulations, squelch, filters more accessible.
waterfall has some problem with scrolling.
to access the memories you have to stop the receiver.
I hope it is still supported and developed.
Pessima
I soldi più mal spesi.
Troppo macchinosa e praticamente inutilizzabile.
App Privacy
The developer, HotPaw Productions, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.
Data Not Collected
The developer does not collect any data from this app.
Privacy practices may vary based on, for example, the features you use or your age. Learn More
Information
- Provider
-
Ronald Nicholson has identified itself as a trader for this app and confirmed that this product or service complies with European Union law.
- Address
- 1909 Magdalena Circle Unit 76 Santa Clara California 95051 United States
- Phone Number
- +1 4082967535
- rhn@hotpaw.com
- Size
- 2.5 MB
- Category
- Utilities
- Compatibility
-
- iPhone
- Requires iOS 14.6 or later.
- iPad
- Requires iPadOS 14.6 or later.
- iPod touch
- Requires iOS 14.6 or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English
- Age Rating
- 4+
- Copyright
- © 2024 HotPaw Productions
- Price
- 9,99 €
Supports
-
Family Sharing
Up to six family members can use this app with Family Sharing enabled.