Jetting for Husqvarna 2T 4+
ISEnet
iPad対応
-
- ¥400
スクリーンショット
説明
This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for Husqvarna 2-strokes MX and enduro bikes (TC, TE and TX models).
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened). These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. Under the recommended main jet, the calculated real value with decimals is shown. The air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality).
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you're using.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
The app includes the following Husqvarna two stroke, off-road motorbikes:
- TC 50: 2017-2024.
- TC 50 Mini: 2017-2024.
- TC 65: 2018-2024.
- TC 85: 2014-2024.
- TC 125: 2014-2021.
- TC 250: 2014-2021.
- TE 125: 2014-2016.
- TE 150: 2017-2019.
- TE 250: 2014-2018.
- TE 300: 2014-2018.
- TX 125: 2017-2019.
- TX 300: 2018-2019.
* Fuel injection engines are not supported. The app is valid only for engines that use carburetor.
If you click in "More from developer" you can find the other carburation tools for 2 strokes & 4 strokes motocross, SX, MX, enduro, supercross, off-road race motorcycles: KTM, Yamaha YZ, Suzuki RM, Honda CR, Honda CRF, Kawasaki KX.
The app is valid for both PRO or beginners dirtriders.
新機能
バージョン 1.5
Models updated to the year 2024.
アプリのプライバシー
デベロッパである"ISEnet"は、アプリのプライバシー慣行に、以下のデータの取り扱いが含まれる可能性があることを示しました。詳しくは、デベロッパプライバシーポリシーを参照してください。
ユーザに関連付けられないデータ
次のデータは収集される場合がありますが、ユーザの識別情報には関連付けられません。
- 位置情報
- ID
プライバシー慣行は、ご利用の機能やお客様の年齢などに応じて異なる場合があります。詳しい情報
情報
- 販売元
- Ingenieria del Software ISEnet S.L.
- サイズ
- 3.6MB
- カテゴリ
- スポーツ
- 互換性
-
- iPhone
- iOS 12.0以降が必要です。
- iPad
- iPadOS 12.0以降が必要です。
- iPod touch
- iOS 12.0以降が必要です。
- Mac
- macOS 11.0以降とApple M1以降のチップを搭載したMacが必要です。
- Apple Vision
- visionOS 1.0以降が必要です。
- 言語
-
日本語、アラビア語、イタリア語、インドネシア語、ウクライナ語、オランダ語、カタロニア語、ギリシャ語、スウェーデン語、スペイン語、スロバキア語、タイ語、チェコ語、デンマーク語、トルコ語、ドイツ語、ノルウェー語 (ブークモール)、ハンガリー語、フィンランド語、フランス語、ヘブライ、ベトナム語、ポルトガル語、ポーランド語、マレー語、ルーマニア語、ロシア語、簡体字中国語、繁体字中国語、英語、韓国語
- 年齢
- 4+
- Copyright
- © 2023 Ingeniería del Software ISEnet
- 価格
- ¥400
サポート
-
ファミリー共有
ファミリー共有を有効にすると、最大6人のファミリーメンバーがこのアプリを使用できます。