LTE Swap 4+
Mobiltex Data
-
- 無料
スクリーンショット
説明
*** Requires a corTalk® RBT1 or RMU123PGM and RMU2 or RMU3 to use. ***
Contact us at 'sales.lteswap@mobiltex.com' to purchase.
LTE Swap facilitates the upgrade process from 2G or 3G cellular technology Mobiltex RMU2 and RMU3 units to corresponding pre-purchased LTE units. It helps transfer all settings and configuration data which allows for a quick and simple swap process. If needed, it will also update the firmware of the unit it is connecting to before completing the swap process to ensure that the most up to date software is being used.
The RMU2 process consists of:
1. Plug in old RMU2 antenna and base to the programmer (RBT1 or RMU123PGM)
2. Run the app, login to your corView account and press "Start"
3. Select your programmer from the list of available devices
4. Wait for the app to read in all the settings and update the programmer and RMU2 (if required)
5. Unplug the old antenna plug in the new antenna
6. The app will then communicate with the corView servers to complete the swap process
7. The user can then send a confirmation email of the swap process for their archives
The RMU3 process consists of:
1. Plug in old RMU3 antenna and base to the programmer (RBT1 or RMU123PGM)
2. Run the app, login to your corView account and press "Start"
3. Select your programmer from the list of available devices
4. Wait for the app to read in all the settings and update the programmer
5. Unplug the old antenna plug in the new antenna
6. Wait for the app to update the RMU3 and write in the settings of the old unit
7. The app will then communicate with the corView servers to complete the swap process
8. The user can then send a confirmation email of the swap process for their archives
The RBT1 and RMU123PGM requires a Bluetooth pairing code entered on the app. The pairing code (default=123456) can be entered and changed with the app. Once paired, the app can reconnect without needing to re-enter the code. The RBT1 pairing code can be reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet.
新機能
バージョン 1.1.0
New LTE swap host.
Firmware:
- RBT1 v1.09
- RMU123PGM v1.12
- RMU3 v1.28
- RMU2 v28
アプリのプライバシー
デベロッパである"Mobiltex Data"は、アプリのプライバシー慣行に、以下のデータの取り扱いが含まれる可能性があることを示しました。詳しくは、デベロッパプライバシーポリシーを参照してください。
データの収集なし
デベロッパはこのアプリからデータを収集しません。
プライバシー慣行は、ご利用の機能やお客様の年齢などに応じて異なる場合があります。詳しい情報
情報
- 販売元
- MOBILTEX DATA LTD
- サイズ
- 55.7MB
- カテゴリ
- 仕事効率化
- 互換性
-
- iPhone
- iOS 12.0以降が必要です。
- iPad
- iPadOS 12.0以降が必要です。
- iPod touch
- iOS 12.0以降が必要です。
- Apple Vision
- visionOS 1.0以降が必要です。
- 言語
-
英語
- 年齢
- 4+
- Copyright
- © 2021 Mobiltex Data Ltd
- 価格
- 無料