Jetting TM Kart for KZ / ICC 4+
ISEnet
iPad용으로 디자인됨
-
- ₩9,900
스크린샷
설명
This app provides, for the current weather conditions and a given engine configuration (engine model, floats, etc.), four jetting recommendations for TM K9, K9B, K9C, KZ10, KZ10B, KZ10C and KZ-R1 engines that have DellOrto VHSHS30 carbs.
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, four different jetting setups are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). Under the recommended main jet, the calculated real value with decimals is shown. Besides this jetting information, the air density, density altitude and relative horsepower are shown too. In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits for each jetting setup to adapt to the concrete engine.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can configure in this screen the information about the engine, that is, the engine model (K9, K9B, K9C, KZ10, KZ10B, KZ10C, KZ-R1), the float type and height, the oil mix ratio and the type of the circuit (spring or road racing, short or long). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
새로운 기능
버전 1.9
Improved service for obtaining weather information.
Minor changes in user interface.
Performance optimizations.
앱이 수집하는 개인정보
ISEnet 개발자가 아래 설명된 데이터 처리 방식이 앱의 개인정보 처리방침에 포함되어 있을 수 있다고 표시했습니다. 자세한 내용은 개발자의 개인정보 처리방침을 참조하십시오.
사용자에게 연결되지 않은 데이터
다음 데이터가 수집될 수 있지만 신원에는 연결되지 않습니다.
- 위치
- 식별자
- 진단
개인정보 처리방침은 사용하는 기능이나 사용자의 나이 등에 따라 달라질 수 있습니다. 더 알아보기
정보
- 제공자
- Ingenieria del Software ISEnet S.L.
- 크기
- 3.9MB
- 카테고리
- 스포츠
- 호환성
-
- iPhone
- iOS 12.1 이상 필요
- iPad
- iPadOS 12.1 이상 필요
- iPod touch
- iOS 12.1 이상 필요
- Mac
- macOS 11.0 이상 및 Apple M1 칩 이상이 탑재된 Mac이 필요
- Apple Vision
- visionOS 1.0 이상 필요
- 언어
-
한국어, 그리스어, 네덜란드어, 덴마크어, 독일어, 러시아어, 루마니아어, 말레이어, 베트남어, 보크몰 노르웨이어, 스웨덴어, 스페인어, 슬로바키아어, 아랍어, 영어, 우크라이나어, 이탈리아어, 인도네시아어, 일본어, 중국어(간체), 중국어(번체), 체코어, 카탈로니아어, 태국어, 터키어, 포르투갈어, 폴란드어, 프랑스어, 핀란드어, 헝가리어, 히브리어
- 연령 등급
- 4+
- 저작권
- © 2020 Ingeniería del Software ISEnet S.L.
- 가격
- ₩9,900
지원
-
가족 공유
가족 공유를 활성화하면 최대 6명의 가족 구성원이 이 앱을 사용할 수 있습니다.