Jetting for Rotax Max EVO Kart ‪٤+‬

ISEnet

مصمم لـ iPad

    • ٥٫٩٩ ‏US$

لقطات الشاشة

الوصف

This app provides, using weather conditions and your engine configuration, a recommendation about jetting and spark plug to use for karts with Rotax Max EVO (Senior, Minimax, Micromax, Supermax, DD2 or Junior), which use a Dellorto VHSB 34 XS carb.

In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.

The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle position, air density and spark plug type values are shown. This data are calculated depending on the weather conditions and the engine configuration given in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).
- Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Micromax, Minimax, Senior, Supermax, Junior or DD2), the model year of the engine, the spark plug brand used, the needle type, the float/pilot jet combo, the floats height, venturi, oil mix ratio, airbox type (new or old model) and the track type.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.

The app is NOT VALID for Rotax Max engines before 2015. For these engines, you should install Jetting Max Kart.

ما الجديد

الإصدار 2.2.1

Small adjustment in the calculation model of micro and mini engines after testing on the dynamometer.
Engines updated until 2024.

خصوصية التطبيق

أوضح المطور ISEnet، أن ممارسات خصوصية التطبيق قد تتضمن معالجة البيانات على النحو الموضح أدناه. لمزيد من المعلومات، انظر %سياسة خصوصية المطور(ة) سياسة خصوصية المطور.

البيانات غير المرتبطة بك

قد يتم جمع البيانات التالية على الرغم من عدم ربطها بهويتك:

  • المعرفات
  • بيانات الاستخدام
  • التشخيص

قد تختلف ممارسات الخصوصية بناءً على الميزات التي تستخدمها أو حسب عمرك على سبيل المثال. معرفة المزيد

يدعم

  • المشاركة العائلية

    يمكن لما يصل إلى ستة أفراد من العائلة استخدام هذا التطبيق عند تمكين "المشاركة العائلية".

المزيد من هذا المطور

Jetting for IAME kart engines
رياضة
Kart Chassis Setup Premium
رياضة
Jetting for IAME KZ Kart
رياضة
Jetting Max Kart for Rotax Max
رياضة
Air Density & RAD meter PRO
رياضة
Jetting TM Kart for KZ / ICC
رياضة

ربما يعجبك أيضًا

Jetting Rotax Max EVO Kart
رياضة
Jetting Rotax Max Kart
رياضة
الإعداد الشاسيه الذهاب كار PRO
رياضة
Jetting for IAME X30 Karting
رياضة
Rotax MAX Jetting
رياضة
Jetting IAME SWIFT & GAZELLE
رياضة