Psychrometer °F 4+

JUN KANAYAMA

    • 免費

iPhone 螢幕截圖

描述

This app is an app that calculates comfort. It calculates heat, cold, dryness and moisture and tells you the comfortable range.You can easily change the value with the dial, and the temperature is displayed in color in an easy-to-understand manner.
By inputting either temperature and humidity, dew point temperature or wet-bulb temperature, the following air conditions can be calculated accurately.
DrybulbTemperature (°F)
WetbulbTemperature (°F)
DewPointTemperature(FrostPoint) (°F)
RelativeHumidity (%rh)
MixingRatio (Humidity ratio) (gr/lb)
AbsoluteHumidity (gr/ft3)
Enthalpy (btu/lb)
SpecificVolume (ft3/lb)
AtmosphericPressure (InHg)
VaporPressure (InHg)
SaturatedVaporPressure (InHg)
Temperature–humidity index(Discomfort index)
(Good indication in the temperature range of 68 to 82°F and humidity of 30 to 60%)

Easy to input by dialing.
You can automatically enter outside temperature and humidity from the weather information.
(Please allow use of location information.)
If you use a psychrometer, please choose from 3 types.
(When not using, please use it as it is as a Assmann.)
Asssmann ... Aspirator psychrometer. It is a forced ventilation type.
Natulral ... August psychrometer.Simple type without forced ventilation.Wall-mounted.
Sling ... Sling Psychrometer.Type that swings around by hand.
(If you press the reset button or the outside air button, it will return to the ventilation type. With the exception of the ventilation type, only wet bulb input is possible.)

The following calculations can be easily performed without a psychrometric chart.
By setting (fixing) the input mode to the dew point input ℃ DP and increasing/decreasing the upper dial, the heating/cooling change can be read.
By setting (fixing) the input mode to wet bulb input °C WB and increasing/decreasing the upper dial, changes in humidification/dehumidification can be read.
For steam humidification, set (fix) the input mode to humidity input% and increase/decrease the lower dial to read.
The formula of SONNTAG is used for the calculation of saturated water vapor pressure, and SPRUNG and FERREL are specified for the calculation formula of each water vapor pressure. Relative humidity is calculated according to WMO.
This app does not measure the value of your current location. Get weather information.
The range of values ​​that can be entered is wide in consideration of usability, but if you enter an extreme value, the error will increase and an error will occur.
Also, please note that the minimum digit will be different due to rounding and other calculations. Therefore, the numbers may be blurred when switching between modes.
We have made every effort to ensure the accuracy of the calculation results, but we do not guarantee their accuracy. Please note that we are not responsible for any damages, losses, disadvantages, etc. that occur during use.

最新功能

版本 3.3

Fixed a bug in which atmospheric pressure was not set upon initial installation.
Improved accuracy of absolute humidity.

App 私隱

開發者表明JUN KANAYAMA的私隱慣例或包括下列資料的處理。詳情請參閱開發者的私隱政策

用於追蹤你的資料

以下資料可能會用於追蹤你在其他公司的 App 和網站的活動:

  • 位置

不會與你連結的資料

開發者可能會收集以下資料,但不會連結你的個人身份:

  • 位置
  • 診斷

私隱慣例或因使用的功能或年齡等因素而異。進一步了解

更多此開發者的出品

計算舒適度
生產力
寵物幾歲了?
娛樂
Usual Mail  Starting Send!
生產力
DogRun - Avoid bones
遊戲

你可能也喜歡

HVAC PT Chart
生產力
Ductulator Duct Sizing
生產力
CookTools
生產力
measureQuick HVAC
生產力
Taco Comfort
生產力
iManifoldCR
生產力