SmartSDR™ - FlexRadio Systems® 17+
Marcus Roskosch
-
- USD 4.99
- 提供 App 內購買項目
螢幕截圖
描述
Official FlexRadio Systems® Client
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series-6000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter (In-App Purchase)
■ DX Cluster support which displays spots directly inside the Pan adapter (In-App Purchase)
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export (In-App Purchase)
■ Support for two Bluetooth and USB Controllers (In-App Purchase)
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX-6000. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700
Find out more here: http://go-to.me/smartsdr
Read the Manual: http://go-to.me/smartsdr-manual
最新功能
版本 6.9.31
This update contains the following changes and improvements:
◉ A new Tool CTR2 Controller has been added which supports Lynnovation CTR2-MIDI Controller for wireless or wired Radio control and CW Keyer connection
NOTE: Details to the CTR2 Controller can be found in the App manual
◉ Support for Antenna Genius 8x1 added
◉ The Genius Tools are now also available for iPhone Max devices
◉ An issue of the FT8 tool when answering or using call signs with prefix was fixed
◉ The FT8 Map view will now be updated with new FT8 messages
◉ An issue was fixed that CW Macros were not send using a MIDI Controller
◉ MultiFlex can now be enabled or disabled under Radio Settings
◉ Some further accessibility improvements
◉ It is now possible to use Macro Variables such as {UTC} for Contest RST generation. This is useful for BARTG contests where the UTC time need do be added to the exchange
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the 'CONTACT DEVELOPER' feature within the app for any issue reports. I will ensure it is promptly resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
App 私隱
開發者表明Marcus Roskosch的私隱慣例或包括下列資料的處理。詳情請參閱開發者的私隱政策。
不收集資料
開發者不會從此 App 收集任何資料。
私隱慣例或因使用的功能或年齡等因素而異。進一步了解
資料
- 供應商
- Marcus Roskosch
- 大小
- 57.6 MB
- 類別
- 工具程式
- 兼容性
-
- iPhone
- 須使用 iOS 16.1 或以上版本。
- iPad
- 須使用 iPadOS 16.1 或以上版本。
- 語言
-
英文
- 年齡
- 17+ 不受限制使用網絡
- Copyright
- © Marcus Roskosch
- 價格
- USD 4.99
- App 內購買項目
-
- 4O3A Genius Device support USD 9.99
- FT8 USD 19.99
- Voice Macros USD 5.99
- Flic 2 Button support USD 5.99
- Logbook Add-on USD 5.99
- MidiController support USD 5.99
- Griffin PowerMate BT Controller support USD 5.99
- DX-Cluster USD 5.99
- Region 1,2 and 3 Band Plan USD 0.00
- FlexRadio Device access USD 64.99
支援
-
家人共享
啟用「家人共享」後,部分 App 內購買項目(包括訂閱項目)可與家庭群組共享。