![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
Kessler kOS 4+
Kessler Crane Inc.
Direka bentuk untuk iPad
-
- Percuma
Petikan Skrin iPad
Penerangan
kOS is an advanced camera motion control software that unlocks the highest level of control and features for Kessler’s industry-leading motion control systems including Second Shooter Plus, Second Shooter Pro, and the newest motion control system CineShooter.
This app allows for ultra-refined keyframe based control in a powerful and easy-to-use interface for applications such as timelapse, stop motion, live video/cinematography, event video, and advanced photography controlled wirelessly via iPad.
CONTROL ANY MOTION
Live, looping, stop motion, timelapse, GigaPixel* and Event Mode camera moves at your fingertips.
DIGITAL KEYRAMING
Simply move each axis into position and hit record. kOS saves your exact positioning for 100% repeatable moves.
WIFI CONNECTIVITY
Your CineShooter, Second Shooter Pro, or Second Shooter Plus device creates its own WiFi network that you can connect your device to instantly.
COMPLEX KEYFRAME MOVEMENT
Create up to 20 keyframes at once for ultra complex movement.
EASY KEYFRAME SMOOTHING
Add and manipulate curves to your moves for ease-in and ease-out motion. Also, link each side of the keyframe to match.
EDITABLE KEYFRAMES
No need to re-record the move if it's not exactly what you want. Edit one or all axes and keyframes into the perfect position. Featuring incremental, exact motor position plus tap and move keyframe adjustments.
REPEATABILITY
Repeat the exact same move over and over again at the same speed or variable speeds depending on the application.
DELAY BY DATE/TIME
Not going to be around when your move needs to start? No problem. Easily set a date/time or fixed amount of time to have your move begin. kOS takes care of the rest.
FLASH MARK/BLOOP
Sync up your moves easily via the built-in flash marks with adjustable delay.
PRE & POST-PHOTOS (TIMELAPSE MODE)
Easily add a series of head or tail photos to your timelapse move.
GO TO POSITION
Set minimum and maximum ranges on each axis (ie. slider 0" to 32") and go to any position by entering a value.
LOAD & GO
This feature allows for pre-loading a move so that you are able to start instantly whenever you are ready.
CAMERA PRE and POST ROLL
Trigger your camera to start recording any amount of time before the move begins and when to stop after the move ends.
ANALOG CONTROL PANEL
Manually control several axes live with the built in analog controller.
EVENT MODE
Event mode is mainly intended for live events or scenarios where exact position recalling on-the-fly is needed. For example, if you are filming a live concert, you can have different positions on stage saved. You can move easily from the drummer, to the guitarist, to the lead singer and so forth. This mode is also great for repeatedly hitting actor marks on set.
GIGAPIXEL
GigaPixel is traditionally used for 360 degree virtual tours, panoramic photographs or GigaPixel images which are extremely high resolution photographs that are compiled of many lower resolution photographs.
GRAPH EXPANSION
Expand the graph with one touch when precise key framing is needed.
SCRUB THROUGH MOVE
Need to edit a key frame or see when the camera will be in a certain position? Use the scrub feature to instantly move to a desired position.
LOOPING
Looping is made easy with kOS. Simply select one-time or continuous looping.
CAMERA CONTROL
Set CineShooter, Second Shooter Pro, Second Shooter Plus device to trigger or control your camera’s exposure time within kOS.
AUTO TIMELAPSE CALCULATION
Enter your desired clip length and frame rate, then kOS will calculate the run time needed.
BUMP BUTTONS
Move in very small increments to ensure a precise camera position.
DROPBOX INTEGRATION
Upload saved moves directly to your Dropbox account within kOS app.
MOTOR CONFIGURATION
Each axis is able to be customized with individual features such as run speed, dampening, smoothness of curves, bump button, and axis naming.
Apa Yang Baru
Versi 5.2.0
#### URE Support
* The default value for the *URE Support Enabled* setting on the *URE Setup* panel is off. Please note that this setting will be forced off when updating from a version prior to 5.2.0.
* Added the ability to display a *URE Status* panel. This panel provides the ability to manually send the value of each of the FreeD camera attributes on a particular virtual camera to URE. The primary use of this is to synchronize the attributes in kOS with what is displayed in URE. Please note that changing one value will update URE with all the values displayed for the selected virtual camera.
* When assigning an Axis to a Connection on the *URE Setup* panel, the list of available axes is now populated with the Axis Name of each axis (as assigned in Motor Settings) instead of the default motor name. The same name is also shown in the Connections list.
* Added an option on the *URE Setup* panel to swap the direction of the Tilt axis on each virtual camera.
#### Other Changes
* Requires and includes Second Shooter Pro firmware 1.0.1.20.
* Various bug fixes and UI/performance improvements.
Privasi App
Pembangun, Kessler Crane Inc., menunjukkan bahawa amalan privasi app mungkin termasuk pengendalian data seperti yang diterangkan di bawah. Untuk maklumat lanjut, lihat dasar privasi pembangun.
Data Tidak Dipautkan kepada Anda
Data berikut mungkin dikumpul tetapi tidak dipautkan ke identiti anda:
- Diagnostik
Amalan privasi mungkin berbeza, sebagai contoh, berdasarkan ciri yang anda guna atau umur anda. Ketahui Lebih Lanjut
Maklumat
- Pembekal
- Kessler Crane Inc.
- Saiz
- 97.4 MB
- Kategori
- Foto & Video
- Keserasian
-
- iPad
- Memerlukan iPadOS 16.0 atau terkini.
- Mac
- Memerlukan macOS 13.0 atau terkini dan Mac dengan cip Apple M1 atau terkini.
- Apple Vision
- Memerlukan visionOS 1.0 atau terkini.
- Bahasa
-
Inggeris
- Umur
- 4+
- Hak Cipta
- © 2013-2024 Kessler Crane Inc. All Rights Reserved.
- Harga
- Percuma