![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
Simionic G1000 (PFD) 4+
晨 李
-
- € 9,99
- Biedt in‑app aankopen
Schermafbeeldingen
Beschrijving
Check out this video:
https://www.youtube.com/watch?v=3xePnu3MsBQ
IMPORTANT NOTICE:
1. This app emulates G1000 PFD functionalities only. It does not include MFD functionalities. To obtain MFD functionalities, download the MFD app from AppStore which can co-operate with this app(PFD) via network connection.
2. This app is for practice only. The navigation database included in this app may be outdated and very possible to be different from what it is in real life.
Disclaimer:
-Simionic and the seller are not affiliated with Garmin,
-The app is not provided, approved, endorsed, or otherwise supported by Garmin.
Garmin G1000 is an integrated avionic system used in many small aircrafts. This simulator simulates a primary flight display(PFD) which is used on Cessna 182T, 172S, 172R, 206H and Beechcraft Baron G58. It can also be configured to adapt piston, turboprop and jet engines. Most of the useful functionalities has been implemented in this simulator, such as navigation, inset map, flight plan, flight director, and autopilot. Besides of that, nearly every nob/button is functioning just like they were on the real G1000.
G1000 is a highly integrated system, it is very powerful and also very complicated. It is recommended that you have a real G1000 user guide from Garmin. This simulator can be used by aviation enthusiasts as well as pilots to perform either an IFR training or just fly for fun. There is a global navigation database included in this simulator, and you can fly any where in the world.
This simulator supports FSX, Prepar3D, MSFS2020, X-Plane and InfiniteFlight. You can use this simulator either as a stand alone trainer or as an instrument for FSX, Prepar3D, X-Plane or InfiniteFlight.
You need G1000Bridge(X) to make this simulator working with FSX, Prepar3D, MSFS2020 or X-Plane. Please visit http://www.simionic.net to download G1000Bridge(X).
Detail list of functionalities:
*Control surface implementation
+Pitch and bank are controlled by tilting the device using built-in accelerometer.
+Throttle and rudder are controlled by touching the screen.
*Flight director modes implementation
+Pitch modes
-Pitch Hold: Yes
-Selected Altitude Capture: Yes
-Altitude Hold: Yes
-Vertical Speed: Yes
-Flight Level Change: Yes
-Vertical Path Tracking: Yes
-VNV Target Altitude Capture: Yes
-Glidepath: Yes
-Glideslope: Yes
-Go Around: Yes
+Roll modes
-Roll Hold: Yes
-Heading Select: Yes
-Navigation: Yes
-Backcourse: Yes
-Approach: Yes
-Go Around: Yes
*Autopilot: Yes
*Flight plan
+Store Flight Plan: Yes(only when MFD connected)
+Invert Flight Plan: Yes
+Closest Point Of FPL: No
+Parallel Track: Yes
+Create ATK Offset Waypoint: Yes
+Direct-to: Yes, with vertical constraints and offset
+Terminal Procedures: Yes
+User defined holding patterns: Yes
*Navigation database: Global, but may not as detailed or updated as they are in the real G1000.
*Inset map: Zoom in/out, browsing, partly de-clutter, topo and terrain are implemented, all the navaids are displayed properly. No traffic, storm scope, NEXRAD radar information and XM information.
*Other functionalities
+Synthetic Vision as an In-App-Purchase item
+All the navaids operations(VOR/ILS course select, ADF/VOR/Waypoint bearing indicator, CDI indicator, etc)
+All the PFD settings(Wind, Bearing1/2, HSI format, Alt unit, Standard baro, etc)
+DME source select: Yes
+Transponder settings: Yes
+Timer and references(V speeds and minimums): Yes
+Advisory and alerts: Yes
+ADF dip: Yes
+Magnetic variation: automatic
*Flight simulator connection
+FSX: Yes
+Prepar3D: Yes
+MSFS2020: Yes
+X-Plane: Yes
+Infinite Flight: Yes, requires 19.4 and later
*MFD connection: Via netwrok
Nieuw
Versie 7.4.3
-When selecting "vector" as the transition point or selecting "vector-to-final" on the PROC window it sets the active leg to the FAF waypoint
-All the IAFs are now listed as tradition points when selecting approach
Beoordelingen en recensies
Oké
Echt een handige app.
Ik heb de app al een paar dagen en het werkt super goed.
Door de app heb je echt een flight simulator gevoel.
Has potential, but minor bugs
Tested with Fs2020 using G1000-bridge. App has a lot of potential, however there are some bugs. For example; when airborne there is a discrepancy of 200-300 feet between the PFD’s altimeters (with same QNH setting). Also the autopilot disconnects at random after a few minutes. AP heading mode is not working. If there is no fix for this kind of bugs, it can’t be used as an extra aid for flighttraining.
Reactie van ontwikkelaar ,
Hi, FS2020 is kind of unstable. Please uncheck the option ‘AP master sync’ on the bridge to avoid random AP disconnects. For the altitude discrepancy, it has something to do with the calculation of the QNH. FS2020 takes 1 inHg for 1000ft instead of accurately 924.66ft. Will do more tests this later. The autopilot in our app are fully functional and works as it should on a real G1000 system. If you have any questions please send an email to lichenpo@hotmail.com.
Great app, but…..
De app looks great.
But it is conflicting with my Logitech AutoPilot panel by overriding the panel settings.
App-privacy
De ontwikkelaar, 晨 李, heeft aangegeven dat volgens de toepassing van het privacybeleid van de app gegevens kunnen worden beheerd zoals hieronder staat beschreven. Ga voor meer informatie naar het privacybeleid van de ontwikkelaar.
Er worden geen gegevens verzameld
De ontwikkelaar verzamelt geen gegevens van deze app.
Toepassing van het privacybeleid kan variëren op basis van bijvoorbeeld de functies die je gebruikt of je leeftijd. Lees meer
Informatie
- Provider
-
Chen Li heeft zichzelf geïdentificeerd als een handelaar van deze app en heeft bevestigd dat dit product of deze dienst voldoet aan de wetgeving van de Europese Unie.
- Adres
- China, Vasteland Tianjin Tianjin A-3-902 City Center Chengdu road Heping District 300000
- Telefoonnummer
- +86 13072267914
- E-mailadres
- lichenpo@hotmail.com
- Grootte
- 515 MB
- Categorie
- Diensten
- Compatibiliteit
-
- iPad
- Vereist iPadOS 9.0 of nieuwer.
- Mac
- Vereist macOS 11.0 of nieuwer.
- Talen
-
Engels
- Leeftijd
- 4+
- Copyright
- © Simionic
- Prijs
- € 9,99
- In-app aankopen
-
- Synthetic Vision € 6,99
- Aircraft Customization € 1,99
- Beechcraft Baron G58 € 1,99