SpeedyBee App 4+

Name: SpeedyBee App
Rating: 3.3 (12 reviews)
Author: CAMERA2000 LIMITED

CAMERA2000 LIMITED

Zaprojektowano dla iPada

- 3,3 • Ocen: 12

- Gratis

Opis

SpeedyBee is an Appllication for Flight controller parameters settings.
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.

Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0

System Requirements : iOS 12.0+

Instructions for use：
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

26 wrz 2024

Wersja 1.8.13

1. Added remote control status and motor status display to the BetaFlight/iNav firmware overview page.
2. Added SD card capacity display to the iNav firmware overview page.
3. Added a User Privacy Agreement.
4. Optimized some interface text, display effects, and button layout to improve the user experience.
5. Fixed crash issues in certain scenarios, enhancing app stability.
6. Fixed some known issues.

3,3 z 5

Ocen: 12

Supported FCs

Your app looks amazing, but could you please post in the description what flight controllers are supported?

Used to work perfectly, now it doesn’t work at all

I used this app many times in the past to connect to my Flywoo Explorer via Flywoo BT-Nano V2. Now it seems that after one of the updates it can no longer connect to this module. It detects it but gets stuck at “Connecting…”

Devs, please fix this issue, I’m unable to connect to my drone at all because of it.

Hot shot

Very handy tool, using on two fpv drones (geprc and t-motor fc’s) with no issues

Deweloper (CAMERA2000 LIMITED) wskazał, że zasady ochrony prywatności w aplikacji mogą obejmować opisane poniżej metody przetwarzania danych. Aby dowiedzieć się więcej, zapoznaj się z zasadami ochrony prywatności dewelopera.