![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
RST Decoder 4+
koji kamogawa
-
- Безкоштовно
Знімки екрана iPhone
Опис
This is an App that decodes Morse code input from the microphone.
It is a Morse practice App that you can use to check if you are keying the correct code.
Signals with good S/N can be decoded correctly, but signals with bad S/N cannot be decoded correctly.
Also, the performance will be degraded for extremely slow or fast signals.
Usually about 5 to 10 characters are required for speed synchronization of Morse Code.
Adjust the input signal so that the peak value changes from level 6 to level 7.
Make fine adjustments to each parameter according to the reception status.
[Additional Functions]
-In addition to the decoder using BPF, a new decoder using FFT has been added so that it can be switched according to the usage.
-AFD (Auto Frequency Detector) function has been added to the decoder using BPF, and BPF can be set automatically by pressing the AFD button.
-The decoder using FFT automatically follows the strongest signal in the band by AFD (Auto Frequency Detector) and AGC (Auto Gain Control). You can also hold the AFD / AGC parameters by pressing the Lock button.
* There will be a time lag of about 1 to 2 seconds for AFD tracking.
[Control parameters]
1. Audio Input Level
2.BPF ON/OFF
3.BPF of Center Frequency
4.BPF of Band Width
5.CW Speed Control ON/OFF
6.CW Speed Control Low, Mid1, Mid2 or High
7.Delete All Decoded Text
8.Realtime CW Signal Display
9.Input signal recording / playback function
*Japanese/KANA text is not supported.
[Note]
Since the signal after BPF is output to the audio output, it can also be used as an AF-CW filter.
[URL of this App working example video]
https://youtu.be/Pwp7W4m-m34
Що нового
Версія 3.1.0
Added a recovery function so that the app can start even in environments without network connection.
However, in that case startup will be delayed by 10 seconds.
Оцінки та відгуки
doesn't work((
shows splash screen and that's it
Відповідь розробника ,
Is the network connected?
If the network is not connected(or using Ad-Blocks), the screen will change after 10 seconds.
Not working
It even can’t start, just spinning loader and that is it. Sad
Відповідь розробника ,
This is a very disappointing report. Please check the following. Are you connected to a network? Or are you using Adblock? From Ver3.1.0 onwards, the app has been modified to start after waiting 10 seconds if the network is not connected.
Приватність програми
Розробник (koji kamogawa) зазначив, що до процедур забезпечення приватності програми може входити обробка даних, як це описано нижче. Докладніші відомості наведено на сторінці політики приватності розробника.
Дані, що використовуються для відстеження ваших дій
Перелічені нижче дані можуть використовуватися для відстеження ваших дій у програмах і на вебсайтах, які належать іншим компаніям:
- Місцезнаходження
- Ідентифікатори
- Дані про використання
- Діагностикa
- Інші дані
Дані, пов’язані з вами
Перелічені нижче дані можуть збиратися та пов’язуватися з вашою особою:
- Місцезнаходження
- Ідентифікатори
- Дані про використання
- Діагностикa
- Інші дані
Процедури роботи з конфіденційною інформацією можуть відрізнятися з урахуванням, наприклад, вашого віку або функцій, якими ви користуєтеся. Докладніше
Інформація
- Постачальник
- koji kamogawa
- Розмір
- 10,7 МБ
- Категорія
- Освіта
- Сумісність
-
- iPhone
- Потрібна iOS 13.0 чи новішої версії.
- iPod touch
- Потрібна iOS 13.0 чи новішої версії.
- Мови
-
Англійська · Японська
- Вікова категорія
- 4+
- Copyright
- © 2023, Koji Kamogawa
- Ціна
- Безкоштовно