rtl_tcp SDR ٤+
HotPaw Productions
-
- ٣٩٫٩٩ ر.س.
لقطات الشاشة
الوصف
An RTL-SDR Software Defined Radio receiver app for iOS devices. Listen to AM, FM, SSB and CW radio signals. View an RF spectrum and waterfall. Connect, via the rtl_tcp network protocol, to networked RTL-SDR USB peripherals.
This app requires an external rtl_tcp server. iOS devices do not currently support the direct connection of USB peripherals such as an RTL-SDR. Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to act, essentially, as the USB port adapter for your iOS device. The rtl_tcp SDR app can also connect to hfp_tcp for the Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for the LimeSDR Mini; see GitHub for server source code. This app can also connect to a Hermes Lite 2 QRP transceiver directly, if it has a known IP address, or through an hl2_tcp server.
No support is provided for installing any of the rtl_tcp or other tcp software needed to use this app (with a Raspberry Pi, or otherwise). Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent USB SDR peripheral, and have already installed and tested rtl_tcp on your Raspberry Pi, Mac, or other server. Note that this app requires a very high bandwidth network connection in order to receive streams of real-time RF samples from an RTL-SDR. It is recommended that your rtl_tcp server be on a wired connection rather than on the same WiFi as your iOS device.
ما الجديد
الإصدار 1.5.2
Stability enhancements and Bug fixes (FM audio spectrum, SSB, noise reduction, and audio limiter)
التقييمات والمراجعات
خصوصية التطبيق
أوضح المطور HotPaw Productions، أن ممارسات خصوصية التطبيق قد تتضمن معالجة البيانات على النحو الموضح أدناه. لمزيد من المعلومات، انظر %سياسة خصوصية المطور(ة) سياسة خصوصية المطور.
لا يتم جمع البيانات
لا يجمع المطور أي بيانات من هذا التطبيق.
قد تختلف ممارسات الخصوصية بناءً على الميزات التي تستخدمها أو حسب عمرك على سبيل المثال. معرفة المزيد
المعلومات
- الموفر
- Ronald Nicholson
- الحجم
- ٢٫٥ م.ب.
- الفئة
- أدوات
- التوافق
-
- iPhone
- يتطلب iOS 14.6 أو أحدث
- iPad
- يتطلب iPadOS 14.6 أو أحدث
- iPod touch
- يتطلب iOS 14.6 أو أحدث
- Apple Vision
- يتطلب visionOS 1.0 أو أحدث
- اللغات
-
الإنجليزية
- التصنيف العمري
- ٤+
- حقوق الطبع والنشر
- © 2024 HotPaw Productions
- السعر
- ٣٩٫٩٩ ر.س.
يدعم
-
المشاركة العائلية
يمكن لما يصل إلى ستة أفراد من العائلة استخدام هذا التطبيق عند تمكين "المشاركة العائلية".