W-Modbus 4+
LumenRadio AB
Designad för iPad
-
- Gratis
Skärmavbilder
Beskrivning
The W-Modbus app has arrived! Upgrade firmware for LumenRadio W-Modbus devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which Modbus RTU address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-Modbus app requires W-Modbus firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
Appintegritet
Utvecklaren LumenRadio AB har angett att appens integritetsrutiner kan inkludera hantering av data enligt beskrivningen nedan. Det finns mer information i utvecklarens integritetspolicy.
Data samlas inte in
Utvecklaren samlar inte in några data från den här appen.
Sekretessriktlinjer kan variera, till exempel utifrån de funktioner du använder eller din ålder. Läs mer
Information
- Leverantör
- LumenRadio AB
- Storlek
- 44,6 MB
- Kategori
- Verktyg
- Kompatibilitet
-
- iPhone
- Kräver iOS 11.0 eller senare.
- iPad
- Kräver iPadOS 11.0 eller senare.
- iPod touch
- Kräver iOS 11.0 eller senare.
- Mac
- Kräver macOS 11.0 eller senare och en Mac med Apple M1‑chip eller senare.
- Apple Vision
- Kräver visionOS 1.0 eller senare.
- Språk
-
engelska
- Ålder
- 4+
- Copyright
- © 2023 LumenRadio AB
- Pris
- Gratis