Proximity - Access Card Calc 4+
Farren Domenici
iPhone için tasarlandı
-
- ₺39,99
iPhone Ekran Görüntüleri
Açıklama
Have a "naked" access card or fob and need to determine its appropriate number and facility code? If you're able to extract the binary or hexadecimal value then Proximity will do the rest.
The first calculator of Proximity works one of two ways:
By inputting the raw binary value of the card or by inputting the hex equivalent.
To use the binary input, simply tap on the box and type in the binary value. The counter in the lower-right corner of the box will keep track of the amount of digits currently displayed.
To use the hex input, tap on the box and enter the hex value. Once complete, select the bit length from the wheel below. This is only necessary when calculating from a hex value.
After tapping on calculate, the output will be displayed. If there is more than one system in the same bit length, tap on Next to cycle through the different formats.
The second calculator is simply the reverse of the first:
Input the facility code, card number, select the format, and tap calculate to generate the raw binary value.
More formats will be released in future versions so long as the information is acquired. If there's a format not on this app and you have the breakdown information, send it to me and I'll fulfill the request.
Currently supports the following formats:
26 bits HID® Standard (H10301)
26 bits Indala
31 bits HID® ADT
33 bits HID® Standard (D10202)
34 bits HID® Standard (H10306)
34 bits HID® Northern (N1002)
34 bits Indala Optus
35 bits HID® Corporate 1000®
36 bits Simplex
36 bits Lenel
36 bits S2
37 bits HID® Farpointe (H10304)
37 bits HID® (no Facility Code) (H10302)
37 bits HID® PointGuard
37 bits Software House
40 bits Casi Rusco
40 bits XceedID
40 bits Honeywell (P10001)
48 bits HID® Corporate 1000®
Disclaimer:
HID® and Corporate 1000® are registered trademarks of HID Global Corporation or its affiliates. This application is not affiliated with nor endorsed by HID Global Corporation.
Compatibility: iPhone / iPod touch on iOS 8.0 or later and iPad on iOS 12.0 or later.
Found a bug? Something not working? Have a suggestion? Feel free to contact me via email: phil@locksmithapps.com
Yenilikler
Sürüm 1.5.1
---Note: This update requires a minimum version of iOS 12.0---
-Under the hood service to maintain a healthy running app
Uygulama Gizliliği
Farren Domenici adlı geliştirici, uygulamanın gizlilik politikasına göre verilerin aşağıda açıklandığı gibi işlenebileceğini bildirdi. Daha fazla bilgi için geliştiricinin gizlilik politikası bölümüne bakın.
Veriler Toplanmaz
Geliştirici, bu uygulamadan herhangi bir veri toplamaz.
Gizlilik uygulamaları, kullandığınız özellikler veya yaşınız gibi faktörlere göre değişiklik gösterebilir. Ayrıntılı Bilgi
Bilgi
- Sağlayıcı
- Farren Domenici
- Boyut
- 686,1 KB
- Kategori
- Yardımcılar
- Uyumluluk
-
- iPhone
- iOS 12.0 veya üst sürümünü gerektirir.
- iPod touch
- iOS 12.0 veya üst sürümünü gerektirir.
- Mac
- macOS 11.0 veya üst sürümünü ve Apple M1 veya üzeri çipe sahip bir Mac gerektirir.
- Diller
-
İngilizce
- Yaş Sınırı
- 4+
- Telif Hakkı
- © 2012-2022 Phil Domenici
- Fiyat
- ₺39,99
Destekledikleri
-
Aile Paylaşımı
Aile Paylaşımı etkinken en fazla altı aile üyesi bu uygulamayı kullanabilir.