
AndruinoApp - Arduino IoT 4+
Andrea Scavuzzo
專為 iPad 設計
-
- $60.00
截圖
簡介
Andruino App is a wired and wireless home sensors for iPhone.
Buying a low cost Arduino open-source electronics prototyping platform, you can control all what you want in your home simply connecting Arduino board to ethernet plug.
Andruino is the first App in which you can drag&drop the sensors/controls above your real home map.
Zero Configurations: Andruino doesn't require router configurations (client mode connection)
Andruino works also in server mode (direct communication between iPhone and boards)
You can connect whatever analog/digital sensors on hardware board and Andruino App communicates with them, displaying in real time the room temperatures (C°/K°), the lights/plugs power consumption (Watt), the kitchen humidity (%), opened doors, and any other informations that comes from your home.
You can switch ON/OFF relays, control PWM outputs, and create pulses.
You can store the sensor behavior in a database displaying it on a graph.
Andruino is 100% customizable:
• Works also without internet connection in direct mode (LAN or without router using access point).
• Works also through 3G/4G
• Maps: home map can be uploaded from camera roll. Size and zoom can be modified. Sensors/controls can be resized.
• Ambients: different Arduino board numbers can be managed with Andruino Ambients. You can manage different boards simultaneously (also connected to different networks)
• Wireless: supports WiFi wireless modules
• Sensor configuration: measure unit, mathematical formula, number of decimals can be managed according to the sensor requirements. Each sensor/relay can be full configurable (both analog/digital/pwm). No sensor/controls limit number (wired and wireless).
• Input events: Low/high limits can trigger visual alarm, push notifications and output activations.
• Arduino can send real time Push Notifications when an event is triggered and/or a limit is reached. You can control your sensors also when AndruinoApp is closed. A notification with all the sensor details will rise on your iPhone (Push notifications are sent also when Andruino-App is closed)
• Power-up and power down notifications.
• The digital outputs can be triggered when a limit is reached. This option can be used to activate a relay when a temperature is reached. The activation can be triggered by any analog/digital/variable resource.
• Graphs: Each sensor can be plotted on a graph. Average/Max/Min value are calculated. You can see the trend of the sensors, such as a graphic display in the temperature of the last two weeks, months or days (data logger function).
• TIMERS: each output pin can be configured with a timer to switch on at desired time (hour, minute, repeat day) and with a specific duration (0 to 18 hours). The time is synchronized every time AndruinoApp is connected and the clock is done using simply using the Arduino internal oscillator (no RTC is required).
• Output temporization: all Arduino outputs PIN can be temporized (from 1 sec to 18 hours)
• Predefined sensors: DHT22, Dallas DS18B20, current sensors etc, have predefined settings with detailed informations used to simplify the electrical connection and configuration.
• Data communication: HTTP POST JSON data-interchange format used to communicate over ethernet. Network access restricted with username and password.
• Supported Arduino boards:
• Arduino Mega 2560 or compatibles with Mega 2560 AVR.
• ESP8266 as Wifi shield
• NodeMCU standalone board (32bit MCU with WiFi integrated)
• SonOff standalone board: basic SOnOff, TH10, S20
• Nucleo 64/Nucleo32 - (STM32 MCU 32bit ARM). It is recommended.
• Arduino firmware is open source, you can download it from Andruino website support (firmware page). You can add new features, improve it as you want.
Visit the website for more details: http://www.andruino.it
新內容
版本 6.04
Datalogger: export database in CSV format
評分與評論
Home automation
This App is perfect for home automation. it can set the timer on/off or duration via iPhone or iPad. Meanwhile, it can link multi base stations and rounter/leaf if you set correct IP address on the Apple WiFi router. it can control it via Internet if you are out of your home. Once you have added the temperature/humidity sensor, you can track your temperature/humidity trend througth your iPhone. I used this App to monitor my aquarium temp, turn on/off the lighting, outdoor/indoor temperature/humidy and security. it works perfect.
App 隱私權
開發者「Andrea Scavuzzo」指出 App 的隱私權實務可能包含下方描述的資料處理。如需更多資訊,請參閱開發者的隱私權政策。
會與你連結的資料
系統可能會收集以下資料,並將其與你的身分連結:
- 聯絡資訊
- 使用者內容
- 識別碼
- 其他資料
隱私權實務可能因你使用的功能或你的年齡等因素而有所不同。進一步瞭解
資訊
- 供應商
- Andrea Scavuzzo
- 大小
- 68 MB
- 類別
- 工具程式
- 相容性
-
- iPhone
- 需要 iOS 13.0 或以上版本。
- iPad
- 需要 iPadOS 13.0 或以上版本。
- iPod touch
- 需要 iOS 13.0 或以上版本。
- Mac
- 需要 macOS 11.0(或以上版本)以及配備 Apple M1(或以上版本)晶片的 Mac。
- Apple Watch
- 需要 watchOS 6.1 或以上版本。
- Apple Vision
- 需要 visionOS 1.0 或以上版本。
- 語言
-
俄文、義大利文、英文、西班牙文
- 年齡分級
- 4+
- Copyright
- © 2013 - Andrea Scavuzzo
- 價格
- $60.00
支援
-
家人共享
啟用「家人共享」,即可讓最多六名家庭成員使用此 App。