Jetting for IAME KZ Kart 4+
ISEnet
專為 iPad 設計
-
- $190.00
截圖
簡介
This app provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc.), a jetting recommendation for go-karts with IAME Screamer (1, 2 & 3), X30 Shifter and 175 cc Super Shifter engines (ICC / KZ1 / KZ2 karting engines).
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, a recommended jetting setup is shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). In addition, this tab lets do a fine tunning adjustment for the main (high) and needle (mid) circuits to adapt to the concrete engine.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you should set in this screen the information about the engine and the carburator (Dellorto VHSH 30 / VHSB 36 RD), that is, the engine model (IAME Screamer -1,2 or 3-, X30 Shifter and 175 cc Super Shifter), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long). Depending of the track type, the jetting setups will be adapted.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
新內容
版本 1.3
Minor adjustment in the calculation model of the IAME Super Shifter engine after testing on the dynamometer.
App 隱私權
開發者「ISEnet」指出 App 的隱私權實務可能包含下方描述的資料處理。如需更多資訊,請參閱開發者的隱私權政策。
不會與你連結的資料
系統可能會收集以下資料,但不會將其與你的身分連結:
- 位置
- 識別碼
隱私權實務可能因你使用的功能或你的年齡等因素而有所不同。進一步瞭解
資訊
- 供應商
- Ingenieria del Software ISEnet S.L.
- 大小
- 3.8 MB
- 類別
- 運動
- 相容性
-
- iPhone
- 需要 iOS 12.0 或以上版本。
- iPad
- 需要 iPadOS 12.0 或以上版本。
- iPod touch
- 需要 iOS 12.0 或以上版本。
- Mac
- 需要 macOS 11.0(或以上版本)以及配備 Apple M1(或以上版本)晶片的 Mac。
- Apple Vision
- 需要 visionOS 1.0 或以上版本。
- 語言
-
丹麥文、匈牙利文、印尼文、土耳其文、巴克摩文挪威文、希伯來文、希臘文、德文、捷克文、斯洛伐克文、日文、法文、波蘭文、泰文、烏克蘭文、瑞典文、簡體中文、繁體中文、羅馬尼亞文、義大利文、芬蘭文、英文、荷蘭文、葡萄牙文、西班牙文、越南文、阿拉伯文、韓文、馬來文
- 年齡分級
- 4+
- Copyright
- © 2023 Ingeniería del Software ISEnet S.L.
- 價格
- $190.00
支援
-
家人共享
啟用「家人共享」,即可讓最多六名家庭成員使用此 App。