Bestway Smart Hub +17

The fact that this doesn’t work on 5G networks is maddening. Documentation is non-existent as far as I can tell. And the interface is not intuitive. For example: the Start time reads “Start in” when, as far as I can tell, it should just say Start Time. The start time is set using the 24-hour clock times (make sure you click “OK” to get the time setting to take). It took me a while to realize that the settings did not mean “start in” a specified number of hours. The start time allows you to set time in minutes and seconds, the Duration has separate settings for hours and minutes. Go figure.

My phone seems to want to reset to the 5G network regularly which probably explains many of the problems I’ve had with the app (like my schedules not working). I’ve just told it to forget the 5G network. I’ll post another review if this fixes things.

My advice to Bestway would be to put some decent instructions on their web site pertaining to the use of this app. And change the wording on the display from “Start in” to “Start Time” (if that is indeed the actual meaning). I suspect the lack of 5G support is a hardware issue in the pump/heating unit. I think an update is long overdue if that’s the case.

So far, my impression is that the product itself (the Saluspa) is a decent product who’s reputation is being marred by their lack of attention to customer support.

I had owned the previous version without Wi-Fi support. The same problems that it has are present in the new version but the Wi-Fi edition is a bit nicer. Before having Wi-Fi you’re only option was to go out and set the temperature hours before you needed it or keep it running at that temperature 24/7. If you lost power, it did not come back on and start heating so you had to keep an eye on that. With the Wi-Fi app these problems are partly solved because you can go set schedules or you can see that if your app isn’t finding the device it’s probably powered off. It would be nice if you would get a notification when problems happen or it can’t find the device. Set up on the Wi-Fi may stump many people because it must be 2.4G. Most routers have 2.4 and 5.0 G and if you’re connected to a 5.0 G network, it won’t work. Set your phone to connect to your 2.4 G and then the setup works nicely. Installation is not too bad but it does take a bit of a learning curve to understand what all is going on. My biggest complaint is that after a loss of power it doesn’t power back on automatically. I may try to open up my old unit and see if I can come up with some hack to make this work make a little circuit to simulate the power button being pressed for the right number of seconds on true power up. Support is terrible, but I kind of expect that at this price.

The app is nice as far as control but I ABSOLUTELY HATE that there are no push notifications to keep you informed as to what is going on at any given time.
Twice I have almost lost/ruined my tub because of this. There are times where I cannot be around it for days at a time and twice i have had a power malfunction and obviously the tub won’t turn back on by itself.
I just don’t think I should have to repeatedly check that app every hr or so to see what’s going on. Maybe update it to send you a notification as to a power loss or a change in temperature PLEASE!