Construction Calc Pro 6 +4

83 Powerful, Proven & Precise Tools.

Enter measurements in feet/inches or metric.

There is no complicated manual to master or instructions to follow, just enter data and get precise results.

HIGH VISIBILITY IN DIRECT SUNLIGHT

White on black text, with blue and orange inputs and outputs for high visibility in direct sunlight.

CALCULATORS INCLUDE:

AGGREGATE

Inputs: Width, Length, Thickness, Density, Wastage
Outputs: Weight, Volume

ASPHALT

Inputs: Width, Length, Thickness
Outputs: Weight, Volume

BALUSTERS

Inputs: Run length, Baluster width, Baluster spacing
Outputs: Qty of balusters, Qty spaces, Baluster spacing (center-to-center), Baluster spacing (edge-to-edge), Measurements to far side of each baluster

BOARD / LINEAL FOOT

Inputs: Thickness, Width, Length, Quantity
Outputs: Board feet, Lineal feet

CONCRETE

Inputs: Width, Length, Thickness, Use rebar option, Rebar spacing along width, Rebar spacing along length
Outputs: Volume, 60lb premixed bags, 80lb premixed bags, 10kg premixed bags, 25kg premixed bags, 50kg premixed bags, Rebar required

CROWN MOULDING
Inputs: Wall angle (corner of wall), Crown (spring) angle
Outputs: Miter angle, Bevel angle

DROP CEILING

Inputs: Length at ceiling, Width at ceiling, Tile size, Distance (anchor to drop ceiling)
Outputs: Ceiling area, Ceiling tiles, Perimeter moulding, Main supports, Tee support peices, Wire length (each), Wire length (total), Wire anchors

DRYWALL

Inputs: Room width, Room length, Room height, Panel width, Panel height, Include ceiling option
Outputs: Area - surface area. Materials - Drywall panels. Joint compounds - Readymixed, Lightweight readymixed, Setting-type, Lightweight setting-type. Fastener - Drywall nails, Drywall screws. Additional items: Joint tape, Primer, Adhesive

FLOORING
Inputs: Width, Length, Wastage, Square Ft or M per box
Outputs: Total area, Boxes needed
FRAMING
Inputs: Total wall length, Qty of windows, Qty of doors, Qty of corners, Stud spacing (on center)
Outputs: Studs required

LINEAR COST ESTIMATOR

Inputs: Single panel length, Qty of panels, Cost per linear foot, Cost per linear meter
Outputs: Total cost, Total length

PAINT
Inputs: Wall length, Wall height, Number of coats, Surface type
Outputs: Gallons required, Liters required

RAFTER
Inputs: Run, Pitch (/12")
Outputs: Rafter length

RISE/RUN/ANGLE
Inputs: Rise, Run, Angle (Enter rise and either run or angle)
Outputs: Angle, slope, Run

ROOFING

Inputs: Width, Length, Pitch, Sq ft or M per pack, Type, Nails, Safety margin
Outputs: Roof surface area, Packs needed, Nails

SQ COST ESTIMATOR

Inputs: Width, Length, Cost per Sq ft or M
Outputs: Total cost, Total area, Total area (acres)