iPhone Screenshots


D-Link+ Viewer To View and control Your D-Link Camera using iPhone, iPhone 5 & iPod Touch. It is very Quick and Easy Access to your D-Link IP Camera over both GSM/LTE and WIFI Networks

- You don't need to find out Camera IP Address anymore! The Application Automatically scans your network and find out your camera IP address over wireless.

- Works with Dynamic DNS services.

- With single touch, you will be able to zoom in/out, Pan, Tilt and Move to Locations (Presence) ... etc.

- You can build unlimited number of cameras to view them in full screen Portrait and Landscape modes

- Snapshot feature allows you to save the camera image to your photos folder for use later.

- Comprehensive support is available by contacting support@cloud4cam.com

D-Link+ Viewer supports the Following Cameras:

- D-Link DCS-1000
- D-Link DCS-1100
- D-Link DCS-1130
- D-Link DCS-1130 L
- D-Link DCS-2000
- D-Link DCS-2100
- D-Link DCS-2102
- D-Link DCS-2103
- D-Link DCS-2120
- D-Link DCS-2121
- D-Link DCS-2130
- D-Link DCS-2132L
- D-Link DCS-2132LB1
- D-Link DCS-2136 L
- D-Link DCS-2210
- D-Link DCS-2210L
- D-Link DCS-2230
- D-Link DCS-2310 L
- D-Link DCS-2330 L
- D-Link DCS-2332 L
- D-Link DCS-2530 L
- D-Link DCS-2630 L
- D-Link DCS-3112
- D-Link DCS-3220
- D-Link DCS-3410
- D-Link DCS-3411
- D-Link DCS-3415
- D-Link DCS-3430
- D-Link DCS-3710
- D-Link DCS-3710B1
- D-Link DCS-3716
- D-Link DCS-4602EV
- D-Link DCS-4701E
- D-Link DCS-5009 L
- D-Link DCS-5010 L
- D-Link DCS-5020 L
- D-Link DCS-5029 L
- D-Link DCS-5030 L
- D-Link DCS-5211 L
- D-Link DCS-5220
- D-Link DCS-5220 B1
- D-Link DCS-5222 L
- D-Link DCS-5222 L B1
- D-Link DCS-5230
- D-Link DCS-5230 L
- D-Link DCS-5300
- D-Link DCS-5300 W
- D-Link DCS-5605
- D-Link DCS-5610
- D-Link DCS-5635
- D-Link DCS-6004 L
- D-Link DCS-6010 L
- D-Link DCS-6110
- D-Link DCS-6111
- D-Link DCS-6112
- D-Link DCS-6113
- D-Link DCS-6410
- D-Link DCS-6510
- D-Link DCS-6511
- D-Link DCS-6513
- D-Link DCS-6616
- D-Link DCS-6620
- D-Link DCS-6817 B1
- D-Link DCS-6818B1
- D-Link DCS-7010 L
- D-Link DCS-7110
- D-Link DCS-7510
- D-Link DCS-900
- D-Link DCS-910
- D-Link DCS-920
- D-Link DCS-930
- D-Link DCS-930 L
- D-Link DCS-930 LB1
- D-Link DCS-931 L
- D-Link DCS-932
- D-Link DCS-932 L
- D-Link DCS-932 LB1
- D-Link DCS-933 L
- D-Link DCS-934 L
- D-Link DCS-935 L
- D-Link DCS-936 L
- D-Link DCS-940 L
- D-Link DCS-942 L
- D-Link DCS-942 LB1
- D-Link DCS-960 L

© D-Link and all D-Link base marks are trademarks of D-Link Systems, Inc.

What’s New

Version 9.8

-Support for iPhone X & iPhone 8.
-iOS bug fixes and improvement.

Ratings and Reviews

1.8 out of 5
5 Ratings

5 Ratings

hlyl0611 ,

Nothing New Here - stick with free myDlink Lite app

I bought a DLINK 5030L camera and was using the myDlink Lite app that is "bundled" with it. It worked fine but I found that it would NOT playback the videos stored in the SD card. After Googling, I found that is a very common problem---found postings dated 2013 so I am sure they aren't doing anything to fix it.

So I searched for another app that might have remedied this issue. I purchased this app because I read that it was compatible with the 5030L and that it could be used for LOCAL and REMOTE viewing and playing back of the recorded videos.

So first of all...the setup wizard only walks you through LOCAL linking of the app to the camera. If you want to view REMOTELY you have to send them your email address and then they will send you the instructions to linking your app to the camera for that scenario--so the wizard instructions claim. The wizard DOES prompt you for your email. I never got the instructions though!

Secondly, even when connected LOCALLY, there was no option to view videos stored on the SD card.

This was a total waste of money---luckily it was only $2!


Dlink camera utility

The app isn't intuitive, should be able to find the cameras itself by looking through the list of wireless devices, determining which ones are cameras and managing them. instead it requests ip addresses and passwords that might have been forgotten. Might work well but i never got to be able to use application since i got stuck not knowing what it demanded. Also, didn't have the wireless camera i had the DCS-932L in the list of cameras so i took the 930 hoping it would work. The Dlink Lite was free, just downloaded it, it found the cameras and i was blissful in my ignorance. Ipads are for inexperienced people. apps should be simple.

flyinghatchet ,

Works flawlessly on old and new iDevices

Have been using this app for 7 months now to monitor 3 D-Link IP cameras. I've used the app with an iPhone 5, iPad Air, iPad 1, and iPhone 4S. Initial setup: it quickly scans and locates the cameras, auto selects the model number, and let's you customize the name and position of thumbnail images (e.g. northwest facing camera on the left, north in the center, and northeast on the right). Have had ZERO crashes and there's plenty of help documentation and support links just in case -- it's just not been needed. No ads, of course, with the paid version (I don't remember if there is a free version). It's even convenient from a Siri standpoint in that she easily recognizes the phrase "Launch D Link" every single time. Also, just used it recently with iOS 8 and have experienced 100% reliability. And I'm talking about the app running continuously on a plugged-in iPad (auto lock disabled) for 3 or 4 days at a time. I do have several other IP camera apps (including the one developed by D-Link) and this one is the best. End of review.


Ahmad Hamadallah
15.8 MB

Requires iOS 8.1 or later. Compatible with iPhone, iPad, and iPod touch.



Age Rating
Rated 4+
© cloud4cam.com


  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

More By This Developer

You May Also Like