Screenshots

Description

...the most advanced optimizing tool for STEPS systems.
All Bluetooth capable SCE8000, SCE7000, SCE6100 and EW-EN100 display are supported!
Additionally to DUE800X0 motors, now DUEP800, DUE7000, DUE6XXX and DUE50X0 drive units are supported too.
Partially compatible also with the latest Shimano motor firmware versions!
See www.eMax-Tuning.com or get detailed & personal information via eMail from info@eMax-Tuning.com

What’s New

Version 1.44

TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com.
TAKE CARE: This version is not able to increase max. Motor support with the latest motor firmware versions from Shimano!
Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via info@eMax-Tuning.com.

This version 1.44 for STEPS drive units is capable to communicate with the SCE8000, SCE7000, SCE6100 and EW-EN100 display types.
Additionally to DUE80X0 motors, now DUEP800, DUE7000, DUE6XXX and DUE50X0 drive units are supported too.

Special to DUE80X0 drive units:
All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version.
With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm.
(with motor firmware 4.2.7 - 4.6.1, the max. assist ratio value could be set 500%)
(with motor firmware 4.2.7 - 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W)

Special to DUE7000 drive units:
All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version.

Special to DUEP800 drive units:
All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, light functionality) could be used in the license free version.

- new in version 1.44 (03.06.21):
-- update to newest firmware version 4.1.5 for DUEP800

- ver. 1.43 (05.05.21):
-- chainring & rear sprocket size for DUE5xxx and DUE6xxx added

- ver. 1.42 (17.04.21):
-- new battery type BT-E8016 added

- ver. 1.41 (11.04.21):
-- new battery types added
-- bugfix (profile 2 EP8-RS default translation error)

- ver. 1.40 (06.04.21):
-- update to firmware 4.4.4 for DUE50X0 (DUE5000, DUE5080)
-- update to fw. 4.7.2 for DUE61X0 (DUE6100, DUE6110, DUE6180)
-- update to fw. 4.7.2 for DUE7000
-- update to fw. 4.1.4 for DUEP800
-- profiles added for EP8/EP8-RS
-- reduced max. speed for EP8 added
-- smallest sprocket for EP8 set to 10 (instead of 11)
-- dark mode issue on light settings solved

- ver. 1.39 (31.01.21):
-- integration of new motor firmware version 4.1.2 for DUEP800
-- extended light indication for DUEP800 (off/manual/on & max. power)
-- chainring - size and sprocket size with all possible correct values now for DUEP800
-- correction of indication of motor firmware version
-- correction of minor text errors

- ver. 1.38 (26.11.20):
-- new battery type BT-E8036 added
-- special settings (derailleur type, etc.) added for DUEP800

- ver. 1.36 (08.11.20):
-- partial compatibility with new firmware versions added (with warning) DUE50X0 [4.4.2], DUE61X0 [4.6.0], DUE7000 [4.6.0], DUE80X0 [4.9.0], DUEP800 [4.1.1]
-- licence placeholdertext in darkmode improved (grey)
-- new battery types added
-- correction of AS - settings
-- optimized "dark mode" handling for licence key entry boxes
-- light activating functionality added
-- motor mounting angle added
-- optimized country specific decimal characters for total distance (odd)

- ver. 1.35 (31.08.20):
-- integration of DUEP800: compatibility with motor firmware 4.0.0 - 4.0.2 (USA - modification and wheel circumference modification)
-- minor bug fixing and optimizations

- ver. 1.34 (13.07.20):
-- DUE80X0: compatibility with newest motor firmware 4.8.0

- ver. 1.33 (18.05.20):
-- 6100, 6110, 6180 and 7000 series drive units with motor firmware 4.4.0 - 4.5.0 accepted
-- 6001, 6010, 6050 series drive units with current motor firmware 3.4.7 accepted
-- 6002, 6012 series drive units with current motor firmware 3.4.0 accepted
-- 5000, 5080 series drive units with current motor firmware 4.2.0 - 4.3.0 accepted

Ratings and Reviews

5.0 out of 5
3 Ratings

3 Ratings

ptmdubai ,

Excellent complement to PC application.

Have been using this he PC version, and this app is the perfect complement.

OC planner ,

Works great!

Works exactly as described. Need to download the app first, pay one dollar. Once you download the app and connect to your bike and send info to eMax. The response time was really fast. They Sent over the access code, downloaded it and it worked awesome! I have not made any changes to the power or torque settings. I just changed the wheel size and bike does well over 30 miles an hour!

I had problems with another company that I had to plug-in another module. The motor would stop working from time to time. Very frustrating. The eMax has works flawlessly on my bike and my friends bike. Highly recommend this upgrade.

Developer Response ,

Thank you very much for this awesome rating! Merry Christmas;-)

App Privacy

The developer, Markus Schlegel, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

Data Not Collected

The developer does not collect any data from this app.

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Supports

  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

You May Also Like