FCBFF is your Foot Controller's Best Friend Forever!
The FCB1010 from Behringer is a popular MIDI foot controller, but it can be difficult to program. FCBFF makes programming quick and easy; you can test out a configuration using the built-in emulation from the app, and then download the configuration to the FCB1010 using the MIDI connection. Instructions for uploading and downloading to the FCB1010 are included in the app, and will take you through the process step-by-step; it's easier than you might expect.
Once you have your FCB1010 programmed, you can use it to control synthesizers, sequencers, loopers, and effects apps, all while keeping your hands on your instrument. Popular iOS apps like MIDImorphosis, Flux:FX, ToneStack, and Loopy, are all at your command, along with MIDI enabled hardware.
If you have more than one iOS device, you can use one of your older devices to make the FCB1010 a wireless MIDI controller -- just use an app like Apollo MIDI over Bluetooth (available free), and MIDI from the FCB can be transmitted to another iOS device. The dual-device setup also makes using a guitar effects app easy. Most guitar audio interfaces use the dock connector -- so if you're playing a guitar, and using an effects app, you can't use the dock port for a MIDI connection. By transferring MIDI from a second device using MIDI over Bluetooth, you can connect the FCB1010 to your guitar effects apps, and have everything working in sync.
The FCB1010 allows you to select different MIDI channels for different types of events. Control Loopy on one MIDI channel, ToneStack on another, and Flux:FX on a third. You can even use innovative pitch-to-MIDI apps like MIDImorphosis, and use your guitar as a synthesizer controller. MIDImorphosis can also be controlled by MIDI messages, to toggle on and off pitch conversion, to switch between different synthesizers, or to switch between monophonic and polyphonic pitch detection.
You can extend your music setup even further by adding Apollo Remote Recorder; recordings can be toggled with the MIDI foot pedals, or you can use Remote Recorder to stream audio wirelessly to another iOS device, or to a desktop.
Take control of your music making setup, by getting the most out of your FCB1010. And if you don't have your FCB1010 with you, or you just want to see what an FCB1010 could do for you, the app provides full emulation.
**** FCBFF is designed to work with the stock Behringer FCB firmware, version 2.3 or later. The app does not support the after-market UNO chip, and similar modifications. Very old FCB1010s with firmware versions below 2.3 may not be compatible. Any FCB1010 manufactured after 2003 should have firmware that is compatible. ****
FCBFF is your Foot Controller's Best Friend Forever -- we think you're going to love it!
This app has been updated by Apple to use the latest Apple signing certificate.
Ratings and Reviews
Finally got it working
Originally couldn’t upload to FCB1010, would be cool if it worked properly, huge disappointment.
UPDATE: Customer service sent me an email within about an hour, explained to me that on the upper left-hand side there is a button for midi which is the interface that you’re sending the information from the iPad to the FCB 1010 and you have to make sure that it is turned on. The thing to remember is that when you click on the interface name if it is in a red lettering it is turned off and black lettering means it is turned on, otherwise this thing works great and saves a whole bunch a time programming this thing. Kudos to the developer for getting back to me and a timely manner and actually fixing the problem, well done!
By the maker of some advanced iOS audio and midi apps that are simply brilliant and represent some of the most ambitious wireless apps and have been early in what will certainly become ubiquitous in the future. Presently it takes pioneers with a lot of talent and devotion. For all the people who have the FCB 1010 and want a smart and easy solution to tricky setup procedures to use your pedal with your device.. And come to think of it there are a great many conveniences using the developer's other apps in a simplified wireless midi control network with yet another tool at your service. Awesome in every way
Must buy if you fulfill the specs.
Be careful and read the description as this works ( apparently ) only with the stock Behringer chip at v2.3 .
I have that model and had NO LUCK using software on my computer to create my setup. Ironically, I ended up finding an iOS solution which is ideal for me as it’s intended use IS to manipulate my iPhone.
Fantastic app. Thanks devs.
The developer, Secret Base Design, has not provided details about its privacy practices and handling of data to Apple.
No Details Provided
The developer will be required to provide privacy details when they submit their next app update.
- Patrick Madden
- 7.9 MB
- Requires iOS 7.0 or later.
- Requires iPadOS 7.0 or later.
- iPod touch
- Requires iOS 7.0 or later.
- Requires macOS 11 or later and a Mac with Apple M1 chip.
- Age Rating
- © 2014 Secret Base Design
With Family Sharing set up, up to six family members can use this app.