![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
Geode Connect ٤+
Juniper Systems Inc.
مصمم لـ iPad
-
- مجانًا
لقطات الشاشة
الوصف
GEODE CONNECT is a configuration and communication utility for the GEODE GNSS RECEIVER. It provides the ability to establish communications to the Geode Real-Time Sub-meter GPS/GNSS Receiver, change receiver settings, and displays position, altitude, estimated horizontal error, differential status fix info, speed, heading, satellites in fix and PDOP. Using the Configure Receiver settings menu, select SBAS, Atlas® L-Band, or NTRIP-delivered RTK Float corrections for selectable accuracy to fit your job. The Skyplot screen shows satellites in use for the various supported constellations and their distribution in the sky. A terminal screen is included to allow users a “deep dive” into the actual data output from the receiver, and direct command access. The Receiver Configuration menu provides the ability to control a wide range of receiver settings to suit your work environment.
REAL-TIME SCALABLE ACCURACY GNSS RECEIVER
Looking for a simple yet precise GNSS solution at an affordable price? With the Geode, you can easily collect real-time, sub-meter, sub-foot or decimeter accurate GNSS data without the huge price tag or complexity of other precision receivers. Designed with versatility in mind, the Geode works with a wide range of devices to fit your needs exactly, and is especially useful for bring-your-own-device workplaces. Take the Geode with you mounted on a pole, in a pack, or held in your hand to collect real-time precise GNSS data in harsh environments, using almost any handheld device. For information on the Geode GPS Receiver, visit our product page at www.junipersys.com.
Disclaimer:
Using the Geode Connect software and a Bluetooth connection to the Geode receiver continuously will increase consumption of battery power on your mobile device.
ما الجديد
الإصدار 2.3.6.0
• Incorrect sign issue for latitude and longitude values between -1 and 0° has been resolved.
• Geode Connect establishes a Bluetooth connection to a previously paired but disconnected Geode only while the app is open.
Use Geode Connect for Windows to install the Geode Bluetooth firmware version 2.1.5 to implement the following updates.
• Allow Blue LED to work with iOS Location Services.
• Improved connection stability when using the Geode for long periods of time on iOS.
• Location Services no longer causes failures on iOS when running at greater than 1 Hz.
التقييمات والمراجعات
Bluetooth issues
There are times where the Bluetooth on the Geode won’t even turn on. Constantly turning it off and on to connect , very unreliable. switching apps from Field Maps to anything will result in a disconnect.
Horrible and won’t work
On iOS you can’t even get through the first screen because NOTHING pops up to click or anything. Horrible app don’t get it it’s just a waste of time.
خصوصية التطبيق
أوضح المطور Juniper Systems Inc.، أن ممارسات خصوصية التطبيق قد تتضمن معالجة البيانات على النحو الموضح أدناه. لمزيد من المعلومات، انظر %سياسة خصوصية المطور(ة) سياسة خصوصية المطور.
البيانات المرتبطة بك
قد يتم جمع البيانات التالية وربطها بهويتك:
- محتوى المستخدم
البيانات غير المرتبطة بك
قد يتم جمع البيانات التالية على الرغم من عدم ربطها بهويتك:
- التشخيص
قد تختلف ممارسات الخصوصية بناءً على الميزات التي تستخدمها أو حسب عمرك على سبيل المثال. معرفة المزيد
المعلومات
- البائع
- Juniper Systems, Inc.
- الحجم
- ٦٠ م.ب.
- الفئة
- أدوات
- التوافق
-
- iPhone
- يتطلب iOS 10.0 أو أحدث
- iPad
- يتطلب iPadOS 10.0 أو أحدث
- iPod touch
- يتطلب iOS 10.0 أو أحدث
- Mac
- يتطلب جهاز macOS 11.0 أو أحدث وجهاز Mac مع شريحة Apple M1 أو أحدث.
- اللغات
- التصنيف العمري
- ٤+
- الموقع
- قد يستخدم هذا التطبيق موقعك حتى عندما لا يكون مفتوحًا، ما قد يؤدي إلى تقليل عمر البطارية.
- حقوق الطبع والنشر
- © 2024 Juniper Systems, Inc.
- السعر
- مجانًا