LTE Swap 4+

Mobiltex Data

    • Miễn phí

Ảnh Chụp Màn Hình

Miêu tả

*** Requires a corTalk® RBT1 or RMU123PGM and RMU2 or RMU3 to use. ***
Contact us at 'sales.lteswap@mobiltex.com' to purchase.

LTE Swap facilitates the upgrade process from 2G or 3G cellular technology Mobiltex RMU2 and RMU3 units to corresponding pre-purchased LTE units. It helps transfer all settings and configuration data which allows for a quick and simple swap process. If needed, it will also update the firmware of the unit it is connecting to before completing the swap process to ensure that the most up to date software is being used.

The RMU2 process consists of:
1. Plug in old RMU2 antenna and base to the programmer (RBT1 or RMU123PGM)
2. Run the app, login to your corView account and press "Start"
3. Select your programmer from the list of available devices
4. Wait for the app to read in all the settings and update the programmer and RMU2 (if required)
5. Unplug the old antenna plug in the new antenna
6. The app will then communicate with the corView servers to complete the swap process
7. The user can then send a confirmation email of the swap process for their archives

The RMU3 process consists of:
1. Plug in old RMU3 antenna and base to the programmer (RBT1 or RMU123PGM)
2. Run the app, login to your corView account and press "Start"
3. Select your programmer from the list of available devices
4. Wait for the app to read in all the settings and update the programmer
5. Unplug the old antenna plug in the new antenna
6. Wait for the app to update the RMU3 and write in the settings of the old unit
7. The app will then communicate with the corView servers to complete the swap process
8. The user can then send a confirmation email of the swap process for their archives

The RBT1 and RMU123PGM requires a Bluetooth pairing code entered on the app. The pairing code (default=123456) can be entered and changed with the app. Once paired, the app can reconnect without needing to re-enter the code. The RBT1 pairing code can be reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet.

Có gì Mới

Phiên bản 1.0.9

New Jasper SIM card support.
Firmware:
- RBT1 v1.09
- RMU123PGM v1.12
- RMU3 v1.28
- RMU2 v28

Quyền Riêng Tư Của Ứng Dụng

Nhà phát triển, Mobiltex Data, đã cho biết rằng phương thức đảm bảo quyền riêng tư của ứng dụng có thể bao gồm việc xử lý dữ liệu như được mô tả ở bên dưới. Để biết thêm thông tin, hãy xem chính sách quyền riêng tư của nhà phát triển.

Dữ Liệu Không Được Thu Thập

Nhà phát triển không thu thập bất kỳ dữ liệu nào từ ứng dụng này.

Phương thức đảm bảo quyền riêng tư có thể khác nhau, chẳng hạn như dựa trên các tính năng bạn sử dụng hoặc độ tuổi của bạn. Tìm hiểu thêm.

Cũng Từ Nhà Phát Triển Này

uGI1 Config
Tiện Ích
RMU3 Config
Tiện Ích
RMU1 Config
Tiện Ích
RMU2 Config
Tiện Ích
uDL1 Config
Tiện Ích
uDL2 Config
Tiện Ích

Có Thể Bạn Cũng Thích

Hummingbird Hotspot
Hiệu Suất
cmd c
Hiệu Suất
Asset Integrity Suite
Hiệu Suất
BLE Scan Pro
Hiệu Suất
My Solar Energy
Hiệu Suất
Subnet Gauge
Hiệu Suất