NOTE: When updating or running for the first time: if you cannot detect or connect to your receiver, try unplugging the receiver and plug it back in to reset the network card. This resolves practically all communication issues.
Fully control the features of your network-enabled Onkyo/Integra receiver - from anywhere in your house with an iPhone/iPod/iPad. You no longer need to be in front of the TV to enjoy your receiver.
• Display of media info on screen - no need to turn on the TV!
• Controls playback of USB sources, iRadio, DLNA and Windows Media shared media
• Supports UP-A1 iPod Dock, UP-HT1 HD Radio Tuner, UP-DT1 DAB+ Tuner, DS-A3 iPod dock
• Customize labels for sources, presets and listening modes
• Control more than one receiver at a time
• Easy configuration and setup - auto-detect and auto-setup
• Zone Controls for all supported zones, including power, volume, and source selection
• Enable/Disable unused sources and listening modes
• Direct tuning using built-in tuner
• Display of audio and video source and output information - HDMI, Bitrate,
• Supports several models of Ethernet to RS-232 converters
• AirPlay capability with an attached AirPlay compatible device.
Note: AirPlay requires an AirPlay-capable device (Apple TV, Airport Express, Boxee, etc.). This works on any model AVR compatible with oRemote
Compatibility list (please check carefully):
These Onkyo/Integra models fully support all functions:
2014 Onkyo/Integra Receivers:
HT-R593, HT-R693, TX-NR535, TX-NR636, TX-NR737, TX-NR838, HT-RC660, HT-R693, TX-NR1030, TX-NR3030, PR-SC5530 Integra DTR-30.6, DTR-40.6, DTR-50.6, DTR-60.6, DTR-70.6, DHC-80.6
2013 Onkyo/Integra Receivers:
TX-NR525, TX-NR626, TX-NR727, TX-NR828, TX-NR929, HT-RC550, HT-RC560. Integra DTR-30.5, DTR-40.5, DTR-50.5, DTR-60.5, DHC-60.5
2012 Onkyo/Integra receivers:
TX-NT414, TX-NR515, TX-NR616, TX-NR717, TX-NR818, TX-NR1010, TX-NR3010, TX-NR5010, RC460, HT-RC470, DTR-20.4, DTR-30.4, DTR-50.4, DTR-70.4, DTM-40.4
These work best with latest Onkyo firmware (no NET menu in Zones):
2011 Onkyo/Integra receivers:
HT-R690 (HT-S7400, HT-S8400) , HT-R990 (HT-S9400THX), HT-RC360
HT-RC370, TX-8050, TX-NA509, TX-NA609, TX-NA-609X, TX-NA1009, TX-NA3009, TX-NA5009, TX-NR509, TX-NR579,TX-NR609, TX-NR709, TX-NR809, TX-NR1009, TX-NR3009, TX-NR5009, PR-SC5509
DTR-20.3, DTR-30.3, DTR-40.3, DTR-50.3, DTR-70.3, DHC-80.3, DTR-80.3
HT-RC270, TX-NR708, TX-NR808, TX-NR1008, TX-NR3008, TX-NR5008, PR-SC5508
DTR 40.2, DHC 40.2, DTR 50.2, DHC 50.2, DTR 70.2, DHC 70.2, DTR 80.2, DHC 80.2
The following models do not support search capability, album art, or on-screen menus:
HT-RC180, TX-NR807, TX-NR1007, TX-NR3007, TX-NR5007, PR-SC5507
DTR-30.2, DTR-40.1, DHC-40.1, DTR-50.1, DTR-70.1, DTR-80.1, DHC-80.1
The following models support only volume, source, listening mode and Zone control:
TX-NA905, TX-NR905, PR-SC885, TX-NA906, TX-NA906X, TX-NR906, PR-SC886
DTC-7, DTX-7, DTR-7.8, DTX-7.8, DTR-8.8, DTX-8.8, DTC-9.8, DTR-4.9, DTR-5.9, DTX-5.9, DTR-6.9, DTR-7.9, DTR-8.9, DTX-8.9, DTR-9.9, DTX-9.9, DTR-20.1
Support is now included for Onkyo and Integra AVRs that only have a serial port on the back. See the support link for more info on this device and where to purchase one.
**If you have any pre-purchase questions regarding product compatibility, please contact me through the support link or via Facebook. I personally answer all emails that arrive. The same goes for any support issues. Thank you.**
Fixed crashing issue when Harmony Hub is present on network.
URI schemes working again on iPad
Ratings and Reviews
Terrible App Support
The developer can’t be bothered to answer support request. I have repeatedly submitted support request both through the app itself and the Facesmash site.
The issue I’m having is periodic invalid IP errors on app launch and periodic app freezes.
I have read that other users are having the same issues.
If the developer has passed away and the app is in a zombie state, it would be nice to know.
I would certainly send flowers if he has passed......,
Yes, best so far
For years, I have resisted this app because it is the most expensive ($5) of the bunch and Onkytroller was satisfactory, the official Onkyo apps are nearly useless. Well O-Remote is much better. The functional controls, even the internet radio & DLNA, are all directly available from the main screen!
It offers nearly all the functions available on the regular remote from anywhere you have the WiFi connection and it reconnects almost instantly when the phone screen no longer shows the app — the official app takes long seconds every single time the screen shuts off or is switched to any other app.
Having the ability to control my AV deck and the different zones via my phone from anywhere within my WiFi range is awesome.
UPDATE 01 Feb 2019: I figured out the disconnection issue, it’s not the app, it’s the AV deck losing its connection. Solution is to unplug the deck for 10 seconds and then restart it. It will re-initialize the Ethernet connection & and the App will work great again.
Best Onkyo App so Far
I have tried most of them and ORemote is my favorite. Recently Onkyo's own app has improved quite a bit. However ORemote gives a lot more control over you receiver which others don't. The interface is quite good. One feature I would request is highlight current setting in the pop up menu so you know what it's set to. Also it works with the 2016 RZ series.
Otherwise very happy with app.
With Family Sharing set up, up to six family members can use this app.