iPhone Screenshots


Short Descritpion: Stay cool with the Official RolliCool™ App and tap your way to cool.
Long Descritpion
Cool Times are just a tap away with the RolliCool app! The RolliCool app was specifically designed to allow you to turn on and control your RolliCool without ever leaving the couch. The RolliCool app connects via both Bluetooth® and Wi-Fi.
The RolliCool App works with both the RolliCool Mini and the RolliCool Split, so you can keep cool no matter what model you have.
Select between Cooling, Dehumidication, or Fan Only modes and you’re on your way to a much more comfortable home or office!
With the RolliCool app, you can cycle through 3 different fan speeds, and open/close the air vents for more powerful cooling, and choose to set your temperature in either Celsius or Fahrenheit.
For energy savers, the RolliCool app comes with a Timer mode and Sleep mode so that you can set times for the RolliCool to automatically turn on, as well as run the RolliCool more quietly for an easier time sleeping.
Use the app to raise or lower temperatures in Celsius or Fahrenheit
Choose between Cool, Dehumidification, and Fan Only Modes!
Timer Mode allows you to set a time for your RolliCool to turn on or off
Vent Mode allows you to open and close the air vents
Sleep Mode allows to sleep peacefully at night while the RolliCool runs at a softer volume
Choose between three different fan speed settings
Connects via Bluetooth® or Wi-Fi
With RolliCool App, cool is just a tap away.

What’s New

Version 2.0.2

debug and add new device support

Ratings and Reviews

2.0 out of 5
41 Ratings

41 Ratings

1998 TJ ,

Only pairs using 2.4 WiFi Network

The unit was physically easy to install but pairing was difficult.
I contacted technical support and they were almost useless.

I was able to resolve my pairing issues with the app by reading the reviews here in the App Store that simply indicated that the unit will only connect to 2.4 Wi-Fi networks. So if you are having difficulty pairing to your phone simply verify that you are using your 2.4 network this change solved the problem for me.

So far I have not had any other issues.

One other problem that I read about was that users were unable to rename the device, that was not an issue for me I was able to rename it very easily.
I have only owned this unit for a few hours but so far other than a slight hiccup with pairing it seems to be a good unit

JengaMachine ,

Feels like Pre Beta

The hardware is pretty good. The software needs a lot of work. This would be a better product if the manufacturer just open sourced it.
The app won’t tell you the current temperature. It won’t tell you if the unit is actively heating or cooling, just what mode you’ve set it to. It won’t even tell you what temperature you’re setting it to until after you set it. The interface makes no sense. You can’t set a repeating schedule, only a single start and stop once in the next 24 hours. The heat mode screen is blue! The “auto” button apparently does nothing. The “sleep” button might work, but you can’t tell from the app.

The only real advantage the app has over the old fashioned remote is the ability to change settings from outside the house.

The app tells me “Rollicool supports Alexa and Echo” every time the app loads, even though I tap “Don’t show again.” I don’t have an Alexa, we use Google Home. Oddly, there is no Google Home integration. There is no SmartThings support, no IFTTT support, no Nest support. It’s frustrating to have a smart home and a smart device that won’t work with any of it.

amcknight14 ,

App Won’t Work - Falsely says water tank full

Had this machine for months, both the machine and all ran wonderfully. One day it was particularly humid so we turned on the dehumidifier mode to see how well it works. The tank quickly filled, machine shuts off, and full tank warning pops up all as it should.

Emptied both the top and bottom drain spots but there was barley any water. Talked with technical support which said “making sure there is no water to drain leave it on fan mode for a while. Then unplug the unit for 2-3 hours. After this time has passed please open the app and plug the unit back into the wall.

This will allow the unit to in a way to "reset" itself and has been known to correct this issue”

This however did nothing. I am unable to return the product for maintenance as I do not have all the original packing and boxes so I’m out of luck on this machine. It still works but the app and WiFi capabilities is what made the high price tag worth it. Not anymore.


Pro-com Products Inc.
16.1 MB

Requires iOS 9.0 or later. Compatible with iPhone, iPad, and iPod touch.



Age Rating


  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

More By This Developer

You May Also Like