Demodulate and play AM and FM signals received by an RTL-SDR, Airspy HF+ or SDRplay radio. Requires a radio and a host computer which are not provided with SDR Receiver and must be separately installed and configured. Streams data from an rtl_tcp, hfp_tcp or rsp_tcp server application which are free and open source applications. The appropriate server application must be installed on the host computer and configured for the attached radio.
SDR Receiver is a Software Defined Radio (SDR) for iOS that processes, demodulates and plays AM, narrowband FM and wideband FM signals. Listen to communications from aircraft (AM), amateur repeaters and VHF handhelds, police and fire, NOAA weather reports (narrowband FM) and commercial broadcasts (wideband FM).
• Easily entered and managed lists of stations to simplify station selection and switching.
• Adjustable squelch that works for both AM and FM signals.
• Adjustable LNA gain (for RTL-SDR radios).
• Adjustable audio high pass and low pass filters.
• Signal strength indicator that shows power level in the signal passband.
• Multiple sampling rates from 240 ksps to 1,920 ksps (for RTL-SDR and SDRplay radios) to accommodate different network bandwidths.
• Selectable 8-bit or 16-bit sample size streaming from Airspy HF+ and SDRplay radios.
SDR Receiver processes signals that are streamed over the network from a host computer (Mac, PC or Raspberry Pi) that is attached by USB bus to an RTL-SDR, Airspy HF+ or SDRplay radio. An rtl_tcp server or equivalent application running on the host computer receives baseband IQ data from the radio and streams the sampled signals over the network to the iOS device running SDR Receiver.
Requires an RTL-SDR, Airspy HF+ or SDRplay radio and a host computer which are not provided with the application.
Updates and layout improvements to support iOS 13.
Ratings and Reviews
Very basic, but stable..
First and foremost (as a few left negative reviews as they didn’t know what this exactly did before purchasing), you need (at minimum) an SDR dongle running on a computer (Mac, PC, Raspberry Pi, etc) in order to use this application. This app is designed to receive a stream of data across a network (LAN or internet) from an SDR source. To stream from the internet (i.e, over LTE to back to your SDR source), you may need to forward a port on your router. The default port for SDR is just 1234.
I have this and the other new one just released (one with waterfall). Both are working ok on iPhone and iPad, In fact this one may even be more stable than the waterfall one. For stability, I give it four stars marking that it’s “very good” and I like it, however there is room for more features. The presets are pretty useless if you don’t live in the California area that it looks like they are for. Restoring the presets is pretty useless as the majority of users will just delete them, use their own freqs, and never need to restore them. While adding a waterfall isn’t really necessary (in fact, it may degrade performance as it has to draw all that), adding LSB/USB modes is something I’d love to see added. Along with, perhaps, squelch. With LSB/USB, especially if they are stable using low freqs through upconverter, I would give this full 5 stars. I’m more interested in performance than eye candy.
I’ve been using this app more often than the “waterfall” one. Sometimes less is more. However, for LSB/USB, I still have to turn to the other app...
Great UX and quality app! Able to stream easily from my phone using rst_tcp on my Raspberry Pi. My only ask is to add squelch to the main screen.
Works great on first try with rtl_tcp hosted on OSX.
- Transition Technology Ventures, LLC
- 9.5 MB
Requires iOS 11.0 or later. Compatible with iPhone, iPad, and iPod touch.
- Age Rating
- Rated 4+
- © 2018 Transition Technology Ventures, LLC
With Family Sharing set up, up to six family members can use this app.