SpeedyBee App 4+

APP for FC parameter settings


Designed for iPad

    • 3.6 • 87 Ratings
    • Free



SpeedyBee is an Appllication for Flight controller parameters settings.
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.

Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0
System Requirements : iOS 12.0+

Instructions for use:
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated  Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

What’s New

Version 1.8.3

This update includes:
1. Fixed and improved several known issues.

Ratings and Reviews

3.6 out of 5
87 Ratings

87 Ratings

Yamsooie ,

Doesn’t work well w/ Kakute boards

Works well with my Matek f711 flight controller using INAV. It does not work well with my quads that all use Kakute f7 flight controllers. It frequently gets stuck on a screen and I have to restart the app. Also, the cli commands don’t work. When I try typing anything in it just brings up a bunch of wonky characters and freezes. Also, regardless of what board I’m using, this app drains battery like there’s no tomorrow, meaning 1-2% per minute on a brand new iPhone 11.

I’ve been using it with the speedybee Bluetooth USB adapter.

Jyunte ,

A useful app, except for the CLI

I'm using the Speedybee app on a 2017 iPad Pro, with the Speedybee Bluetooth adapter and a BrainFPV RADIX FC. When I go to the CLI and issue any command which yields a lot of text output (DIFF ALL, DUMP, etc), the app drops characters...a LOT of characters. If you ever wanted to paste the output back into the FC, it would fall due to incorrect syntax and bad values for the command arguments. There seems to be no error checking or flow control. Data comes from the FC too quickly for the adapter and/or the app to process. I reached out to Speedybee, who replied saying "We tested it, it works." - totally ignoring the screen shots of it clearly not working! There has been no other communication from their support personnel.

HVConstruction ,

A Staple in the hobby

This app linked with the device never leak my backpack. Just an example: Sometimes I have missed a switch in modes tab and was able to correct it in the field. The tool is absolutely essential to the hobby. Nothing but praise for this product. GET ONE !

App Privacy

The developer, CAMERA2000 LIMITED, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

Data Not Linked to You

The following data may be collected but it is not linked to your identity:

  • User Content
  • Other Data

Privacy practices may vary, for example, based on the features you use or your age. Learn More

More By This Developer

You Might Also Like