SpeedyBee App +4

Name: SpeedyBee App
Rating: 3.5 (98 reviews)
Author: CAMERA2000 LIMITED

CAMERA2000 LIMITED

Desenvolvido para iPad

- 3,5 • 98 avaliações

- Grátis

Descrição

SpeedyBee is an Appllication for Flight controller parameters settings.
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.

Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0

System Requirements : iOS 12.0+

Instructions for use：
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

6 de ago. de 2024

Versão 1.8.11

1. Fix bugs

3,5 de 5

98 avaliações

Doesn’t work well w/ Kakute boards

Works well with my Matek f711 flight controller using INAV. It does not work well with my quads that all use Kakute f7 flight controllers. It frequently gets stuck on a screen and I have to restart the app. Also, the cli commands don’t work. When I try typing anything in it just brings up a bunch of wonky characters and freezes. Also, regardless of what board I’m using, this app drains battery like there’s no tomorrow, meaning 1-2% per minute on a brand new iPhone 11.

I’ve been using it with the speedybee Bluetooth USB adapter.

Functions awesome in the field!!!

I’m fairly new to to FPV and getting into PID tuning. I’d been taking my laptop out with me which is incredibly inconvenient and cumbersome. I got the Speedy Bee Adaptor 3 and I plug it in to the flight controller and battery then connect to my phone via Bluetooth. I certainly wouldn’t use this set up to a quad from scratch and I’m sure that was not its intended function. It’s absolutely a viable solution for making small adjustments (especially for PID tuning) in the field vice using your laptop.

Speedy Bee-if you could please please add PID Toolbox to this somehow-that would be amazing!

A useful app, except for the CLI

I'm using the Speedybee app on a 2017 iPad Pro, with the Speedybee Bluetooth adapter and a BrainFPV RADIX FC. When I go to the CLI and issue any command which yields a lot of text output (DIFF ALL, DUMP, etc), the app drops characters...a LOT of characters. If you ever wanted to paste the output back into the FC, it would fall due to incorrect syntax and bad values for the command arguments. There seems to be no error checking or flow control. Data comes from the FC too quickly for the adapter and/or the app to process. I reached out to Speedybee, who replied saying "We tested it, it works." - totally ignoring the screen shots of it clearly not working! There has been no other communication from their support personnel.

CAMERA2000 LIMITED, responsável pelo desenvolvimento do app, indicou que as práticas de privacidade do app podem incluir o gerenciamento de dados conforme descrito abaixo. Para mais informações, consulte sua política de privacidade.