![](/assets/artwork/1x1-42817eea7ade52607a760cbee00d1495.gif)
SPL 4+
Andrew Smith
Разработано для iPad
-
- 8,99 $
Снимки экрана
Описание
SPL is a professional-grade digital sound level meter (decibel meter) for your iPad, iPhone or iPod touch. It includes all of the modes, filters, and features that you would expect from a professional ANSI or IEC Sound Level Meter. All filters and averaging modes meet or exceed the criteria for ANSI Type 1 standards or better. SPL is created from the same team who brought you the Audio Toolbox and ATB Plus.
Store Results -- Uses the same powerful Save / Recall engine as our premier app, AudioTools. Allows storing GPS and time-stamped results, and exporting them to your computer.
You can also use SPL with our calibrated iPhone measurement mic, iTestMic, or iAudioInterface.
The screen flips if you turn the phone upside down, so that you can point the built-in iPhone mic directly at the sound source.
*** Modes: Slow, Fast, Impulse, Peak, and Leq.
*** Filters: A and C weighting, and 10 octave band filters.
*** Includes a resettable Max field to track the highest reading.
*** Includes a reference field (except in Leq mode) so that you can set a reference level and do seat-to-seat comparisons.
The SPL meter can be fully calibrated. It comes preset with the calibration for a typical iPad, iPhone, and iPod Touch. Most iOS devices will be within a few dB of this reading. If you have access, even temporarily, to a calibrated sound level meter, just use the calibration field on the settings scree to match the meter, and you will be accurately calibrated.
Also, see our other professional-grade audio apps: AudioTools, our premier suite of professional-caliber audio and acoustics test apps, Speaker Pop, to test speaker polarity, and RTA, a real-time analyzer for the iPhone.
And, we have a group of calibrated, accurate measurement microphones, including iTestMic,iTestMic2, and iAudioInterface2, that allows full professional results for Type 1 or Type 2 measurements.
This will allow measuring a range from approximately 30 dB SPL to 130 dB SPL. Each mic will include a calibration factor that you will enter into the SPL app for calibrated measurements. This mic will also work with Speaker Pop, our speaker polarity tester, FFT, RTA, ETC, and other acoustical measurement apps in our AudioTools app that is available now.
Also, see our iAudioInterface2 system, which supports any pro test and measurement mic.
Now includes an iPhone internal mic compensation filter, to cancel out the low-frequency roll-off present in the iPhone and other iOS devices.
See our other audio apps, including AudioTools.
Что нового
Версия 7.4
-Bug fixes and stability improvements
Оценки и отзывы
Horrible color scheme
I have loved this app previously. In fact, I would have always given this app five stars until this version. I have been using this app for years now and I have always used the 'dark metal' color scheme. Now the only option is white. The white color option is TERRIBLE!!!!!
As a foh guy, I use this app a lot. But I think I will be looking for another app because the white color scheme adds extra light to foh and the white is extremely harsh on the eyes.
If you have not updated to the newest version, don't. It's not worth it.
Amazing
Oh no! A disastrous update!!!
They finally took the horrible, battery-draining background operation so-call "feature" out of RTA, but they put it into SPL. Now, when you exit this app in the conventional way, it keeps running and draining your battery!!!
Why they think this is a good idea or should be the default operation is just beyond me. Please, please, make this behavior optional and default it to operate in the way that most iPhone apps do, to exit the app when you press the home button.
------ original review -------
I have recently had the opportunity to compare with a very calibrated instrument and was very favorably impressed. This thing works very well.
I also checked my Radio Shack meter at the same time and it's good right around 1KHz which is where -- if you read its instructions -- it is calibrated. The Radio Shack SPL meter, by the way, while a bargain for the price and quite good for what it is, is not a good tool for tuning subwoofers at all. This iPhone ap, while better, still isn't the best for subs either with the built-in mic, but worked much better with an external.
Also, this ap's A-weight filter is better than Radio Shack's.
In conclusion, this ap is a bargain for the price and so handy to have with you.
A+.
My one suggested improvement: a logging mode which logs SPL at selectable intervals -- minutes and seconds -- and then can e-mail the log out in csv format with time and SPL reading.
Best db meter on for iPhone.
Best db meter on for iPhone. I've downloaded and used them all. This one is easy to use, has the most parameter settings, and the ability to record peaks.
It is however, strictly a db meter. Some other meters show frequency and plots of readings over time. These would be nice features to see added.
Ther one feature I think is clearly missing is the ability to utilize the capabilities of the iPhone to actually transmit the captured data. If this were coupled by the ability to record real time readings this would be an awesome application. Having spectral analysis, and perhaps capture, would make it perfect.
Конфиденциальность приложения
Разработчик Andrew Smith указал, что в соответствии с политикой конфиденциальности приложения данные могут обрабатываться так, как описано ниже. Подробные сведения доступны в политике конфиденциальности разработчика.
Сбор данных не ведется
Разработчик не ведет сбор данных в этом приложении.
Конфиденциальные данные могут использоваться по-разному в зависимости от вашего возраста, задействованных функций или других факторов. Подробнее
Информация
- Продавец
- Andrew Smith
- Размер
- 31,6 МБ
- Категория
- Музыка
- Совместимость
-
- iPhone
- Требуется iOS 13.0 или новее.
- iPad
- Требуется iPadOS 13.0 или новее.
- iPod touch
- Требуется iOS 13.0 или новее.
- Mac
- Требуется macOS 11.0 или новее и компьютер Mac с чипом Apple M1 или новее.
- Apple Vision
- Требуется visionOS 1.0 или новее.
- Языки
-
английский, немецкий, польский, упрощенный китайский, французский, шведский, японский
- Возраст
- 4+
- Copyright
- © Andrew Smith
- Цена
- 8,99 $
Поддерживается
-
Семейный доступ
При включенном Семейном доступе приложением могут пользоваться до шести членов «Семьи».