• Custom colours can be applied to any column in the plan sheet. Find the option in Plan Sheet Settings • New look fuel plan sheet (feedback welcomed) • 'Alternate' summaries in the fuel plan now only show the subtotal information relevant to the alternate leg/route • Default refuel is only applied on the first sector in a plan. Subsequent sectors will now use the remaining fuel from last sector by default • Additional and approach fuels are now deducted from the fuel required amount when determining subsequent sector start fuel values • 'Holding' duration on the fuel plan now calculates using holding burn rate, if specified in the aircraft profile • Airwork / holding, & hover burns now always calculate using their respective aircraft profile value, if present • Fixed some absent NAIPS form export information e.g. TEET • Printing the new plan sheet now includes starting Fuel on Board (FOB) as a seperate line item • Fixed an issue where aerodrome plates could not be rotated when using 'Dark' theme • Fixed an app freeze that could happen on Settings page • Display Aircraft ID in aircraft profile selection list, if different from registration • Removed 'SUNSET' HUD box • Removed indefinite loading spinner in Airfields 'List' view that prevented all other app interaction • Improved launch process after app deletion, now shows onboarding sequence • Removed 'swipe to go back' gesture on Documents thumbnail view in iOS 26 • Fixed a crash that could occur when pausing downloads • Fixed a crash on server error in NAIPS Amend/Cancel • Fixed a crash on server error in Waypoint Details Wx/NOTAMs view • Fixed a crash on the Fuel Plan Sheet that could occur in iOS 16 & 17 when loading with no data • Fixed an iOS 16 date picker crash

- Fixed an issue where some files could incorrectly display a download error, or trigger unnecessary re-downloads

- Fixed the alternate fuel result including the entire sector up to and including the alternate segments. - Enabled quick actions on sector and alternate headings in plan sheet to cancel alternates and modify sectors.

New Plan Sheet changes - Aircraft ‘Default Additional Fuel’ amount is now applied to new sectors or when an aircraft change is made for a plan - Direct To waypoints now just say ‘Direct’ instead of showing an irrelevant direct to waypoint number - Taxi fuel is now correctly deducted from carry over fuel for multiple sector plans - Setting fuel for subsequent sectors, and also clearing it, now uses Default Refuel, Fuel Capacity, or planned amount where appropriate - Contingency and holding fuel are now correctly consumed in the plan where the associated toggle is ON in the aircraft profile - New plan sheet now correctly sets distance, track and TAS on Direct To plans - ETA, REV and ATA values will now be included when exporting a plan via PDF Pack - Fixed an issue where airwork was interfering with HDG calculations General Fixes & Updates - Fixed a crash when showing airfield pages linked to custom/user waypoints - Fixed an issue that was causing some re-downloading of files

- Added a button to view converted W&B information in the weight and balance view - Removed discontinued BOM radar view. - Fix crash that could occur when loading landing fees - Enabled decimal and minus key for W&B keyboard entry - Added a space bar key for coordinate entry when entering data for a custom user waypoint - Fixed single finger double tap to zoom functionality - W&B Unit separator changed from a dash '-' to an interpunct '·' for multiplied units - Revised moment arm conversion numbers for W&B to ensure correct values are being used - Updated decimal precision for W&B moment arm conversion factors - Ownship range ring (x NM/km Circle) will now set to lower clamped value if a smaller value is entered by the user - Range ring entry for waypoints now has a minimum slider option of 1NM to bring it in line with the text entry field == New Plan Sheet == - Fixed some calculation issues that could arise when an aircraft has ONLY detailed performance information in lieu of basic/single figure performance information - Changes to 'Pilot', 'Flight Rules' and 'Flight Type' are now sticky across Plan Sheet and Plan Details popup - Taxi fuel is now deducted from the first segment of each sector in the plan sheet 'FOB' column. - When creating a new sector, taxi fuel is correctly deducted for the first segment without having to exit and enter the plan sheet - Fixed issue where arrival height was using 0 instead of airfield height when determining TOD point - TOC is no longer displayed when route is 'direct to' whilst flying - Calculation improvements for how wind is applied to climbs and descents

- Fix Show/Hide button (left toolbar) pushing off the screen when GPS HUD is hidden - Fixed an issue where imported User Waypoints could be incorrectly matched to non-user waypoints - macOS: improved contrast of toolbars and floating windows - Added placeholder altitude optimiser button to 'ALT' column heading in new plan sheet - Fixed a date picker crash for iOS/iPadOS 16 - Icon Adjustments for iOS/iPadOS 26 - Plan Sheet W&B now uses a new number keyboard - Form views have had performance and layout updates

- Added bearing info when "rubber-banding" a new waypoint into an existing plan/track - Fixed Track History and Track Pointer settings not working in Map View Options - Tapping anywhere on the Flight/Engine Timer (not just the icon) will now invoke the timer menu - Importing User Waypoints no longer fills "Lat/Lon" into name field where name is blank - Fixed an issue where copy/pasting routes into Quick Plan could cause waypoint processing errors - Fixed an issue where long-press airspace details on main map screen wouldn’t always show complete information - Added the ability to upload Aircraft Profiles direct to Dashboard - Added support for electric Aircraft Profiles (kW, kWh units) - Added support for toggling map collars on/off (where present) - Various New Plan Sheet improvements: new custom keyboards, Performance, UI, Windy Route, Stability, Refreshing, Fuel, Printing, Plan Features - Fixed crash that could occur in iOS 16 with the date picker - Fixed HUD to respect aircraft profile units (GS, DTG) - ScratchPad tab is hidden when window is scaled down to improve iPadOS 26 compatibility - Fix visual touch indicators distorting after rotating on iPadOS 26 - Fix cases where scrolling wouldn’t work in the long-press airspace selector - Fix a refresh issue on Plan Summary when changing times - Fix a freeze that could happen when viewing a document on the Airfields page - Fix a potential UI freeze after resuming the app (c1d0a311, 92c0bfd9) - Various fixes for iOS/iPadOS 26 - General performance improvements

- Change date selectors in plan sheet from calendar to wheels - Fixed an issue where opening a file could open a new window on iPad - Fixed an issue where importing GPX files would crash - Update displayed units km, kt, ft/min, m/min app wide to be closer to ICAO standards - SmartBrief now shows GAF PDF in full screen - General stability improvements - New plan sheet fixes

- Added kilometre (km) option to Own Ship Circle - Various updates and changes to the new plan sheet (currently EXPERIMENTAL, access by request only, contact support) - Added Sentry mount position options for AHRS - Added Client Mode support for Sentry Plus - Fixed an issue where the AHRS button may not initially appear when connecting a supported device - Fixed an issue where User Waypoint names wouldn't update on the map when renaming via plan - Improved KML overlay handling to reduce line thickness at high zoom levels e.g. power lines - Improved colours/readability for airspace details box (i.e. no more black text on blue background) and added support for light dark/mode - Weight and Balance MTOW circle now correctly highlights red when greater than MTOW limit (if set) - Bearing line is now shown for single waypoint plans - Minimum contingency fuel time, if set in aircraft profile, now calculates correctly on the fuel plan sheet - Added support for uploading plans to Enterprise Dashboard. Option must be added to the enterprise account, contact support for access. - Fixed a stability issue that could occur when the app gets suspended/backgrounded - Fixed splay size of 'non GNSS Area Navigation', now correctly extends to 40NM instead of 44NM - Fixed TAFG visibility darkening for overlapping FM/TEMPO periods - Overhaul/update for Swift 6, includes performance optimisations to Maps, Airspace, Terrain, LSALT Assistant and SmartBrief - Various performance improvements

- Add status icons to subscriptions in Settings > Subscriptions - Subscription expiry warning no longer appears for an expiring trial where a subscription has already been purchased - Fixed an issue where air routes could be erroneously inserted into a plan - Fixed an issue where fuel weights in a Fuel Table would convert when aircraft 'Weight' unit changed (now only converts when 'Fuel' unit is changed) - Fixed an issue where traffic bubbles would not fade out on connection loss - Fixed an issue where certain waypoints could appear in the 'Closest Points' tap on map popup even if they were turned off - Fixed a stability issue that could occur when viewing details in SmartBrief - Altitude Optimiser now shows OAT for NAIPS Wind/Temp, instead of ISA deviation - Fixed a SmartBrief caching issue - General performance improvements

- uAvionics and Sentry ADS-B devices show serial in decimal instead of hexadecimal - Fix blurry Hybrid VFR map on first install - SmartPlates overlay follows rotation of DAPS - Fix excessive network requests for weather overlay - Fix text annotations duplicated on AIP-SUP plates

- Red active restricted areas on the main map screen now more closely match SmartBrief where we have manually edited the RA dimensions (e.g. partial activations of Woomera WRX) - Tap-on-map targets tweaked making it less likely to tap the magenta route line, and more likely to tap a waypoint icon - Height above ground (HAG) HUD box now shows '--' instead of '-1' for missing data - Airdropping flight plans with custom waypoints that have an empty name field are now kept empty rather than changed to 'Not set' - The SmartBrief 'Your ETD is in the past' alert no longer appears when you are actively flying. This should only occur on the ground now. Please let us know if you see this airborne. - Fixed an issue where SmartBrief detail view was incorrectly displaying a "no data" message - Fixed a crash that could occur when viewing a SmartBrief GAF with duplicate condition entries - Fixed an issue where Map Track up direction toolbar icon could shrink

• Traffic from GDL90 broadcasting as on ground will show ‘GND’ in the traffic bubble • Fixed some visual glitches that would show on the SmartBrief detail view when adjusting controls • Fixed a text layout issue that could occur in Quick Plan when using an external keyboard • GDL90 device ‘Sentry Mk2’ added to the supported devices list • Device settings are now shown on the Settings screen even for unknown hardware IDs • Fixed a bug where it wasn’t possible to tap a route segment with map in Track Up mode • Route feature labels (e.g. Top of Descent) will now remain upright in map Track Up mode • Altitude Optimiser now processes an alternate leg (if present) • All NOTAM filters on SmartBrief are enabled by default on a fresh install • Fixed an issue where the close button on IFIS form may not show • General performance and stability improvements

- Hide ADS-B traffic bubbles that match ICAO address (if entered) in the active aircraft profile - Open Street Map / map engine performance improvements - 'Submit to IFIS' button in Plan Sheet now correctly opens the IFIS form - IFIS: where Z and G are selected for 'Equipment and Capabilities' in the active aircraft profile, 'RNP2' is added to the 'NAV/' field - IFIS: (IFR) Remove 'DCT' from route, last 'DCT' line that would otherwise be empty is now removed - Fix IFIS form UI spacing layout on route table - Update Avidyne SDK to v10.3.2.2 - Fixed a portrait view spacing issue in SmartBrief - Stability improvements to airspace shapes rendering and detection - General stability improvements

- Fix to plan sequencer times when in planning mode - Fix calculation issue when toggling alternate on plan sheet - Fix minor altitude rounding issue for terrain objects - Traffic bubble rendering optimisation - Stability improvements to Flight Phase Manager - In app simulator, recenter button turns on cursor, retains current altitude, speed and heading - In app simulator view will move above the on screen keyboard when entering values - New plan sheet improvements

- When creating a new user waypoint, show user waypoints on the map. - Improve the formatting of “nm” units to “NM” for better readability for GPS hud. - Enhance the performance and accuracy of QuickPlan. - Resolve issue where adding air routes from waypoint details can result in the wrong sequence and add landing points. - Resolve the issue where refuelling a sector does not utilise the default amount - Improvements to new plan sheet

- Fixed an error that would occur on importing organisation plans - Fixed a crash that could occur in Airfields tab - Prevent crash on empty results on AIP searches - New plan sheet improvements

- Fix swipe to delete on plan overview - Fix to multi stage route description in NAIPS form - Additional enhancements to new plan sheet

Features: - Plan Sheet (Experimental): Try our completely redesigned Plan Sheet with new UI, mid-plan alternates, enhanced fuel planning and more - Multi-Sector & Alternate Support added to Plan Overview for improved flight planning flexibility - Simplified date picker with local time toggle for easier time zone management - Winds aloft now available for PNG Premium subscribers in the SmartBrief tab - Organisation aircraft profiles now automatically removed from device when you're not in an organisation Improvements & Fixes: - Fixed a crash when selecting a country's AIP in the Documents tab - Improved stability for iLevel Autopilot integration - Resolved issues with download group handling for expired databases - Added protection against potential crash on invalid coordinates - Performance improvements to Quick Plan functionality - Fixed dark mode display issues in Morse code, landing fees and Frequency Navigator - Removed Circling Area distance overlay from DAPS in line with updated AU AIP requirements - "Download on startup" button now selectable in the Downloads section

- Prevent a potential crash to do with terrain look up - Aircraft Profile, detailed performance allows for greater range of values - Fix a stability issue on airfields tab - Fix a stability issue on quicker planner - Fix a stability issue when editing a form, e.g. weight and balance - Fixed stability issues for Stratux GDL90 devices - Fixed stability issues in Simulator and Information settings - Fixed an issue where main map would go blank after resetting tile cache - Added support for handing a non-standard format for no wind in BOM METAR

- Fix "Lat Lon" type axis labels in weight and balance - Traffic bubble performance optimisations - Fix crash that could happen in device settings section - General stability improvements - Improve invalid KML error handling

Features: • In-app ‘simulator’ controls! Test out OzRunways without having to use an external simulator or go flying. Turn on in Settings → Simulator Mode (both ‘Simulator Mode’ and ‘Enable in-app simulator controls’ must be toggled ON) • External game controller support. • Landing Fees, where available, are now shown in Airport Details (tap on map → tap on the desired airfield in the Closest Points popup) Improvements: • All Traffic Bubbles are now a teal colour for better visibility across a wide range of charts. Where the traffic bubble is from an ADS-B source a ‘radio wave’ icon appears next to the callsign inside the bubble. • Support multiple runway visual ranges (eAWIS, METAR) • Added Delete button to Settings -> NAIPS to clean up saved plans • Added UserID/username to W&B in PDF Pack • Added export GPX option to waypoint share dropdown • Removed the redundant NAIPS username/password field in Settings → NAIPS. Credentials should be entered in Settings -> Integrations. • Aircraft profiles added new ‘NAV/RNP 2’ Item 18 for New Zealand Pilots Fixes: • Fixed an ozwpt:// linking issue where OzRunways would be sent to the background when opening the link • Fixed an issue where traffic bubble may not enlarge straight away when tapped • Performance improvements in SmartBrief

• Fix an on launch issue that could happen on older iOS devices

New Features: • Planned Progress Widget: Tapping now toggles between "Planned" and "Current" times for IFR departures. • LSALT Splay Update: Added DR-type LSALT splay (15º to 50NM + 5NM buffer). • ForeFlight Sentry Battery Indicator: Battery status now shows in the traffic status widget. • SmartBrief Deep Linking: Added new parameters for deep linking with SmartBrief: Improvements: • Improved icon layout on the traffic status widget. • Enhanced flight phase detection to use terrain data over airfield data. • Added global winds to SmartBrief. • Increased tap target size for map toolbars for easier interaction. • Improved multi-window handling: tapping the plan sheet icon brings any open plan sheets forward.

- Fix for chart W&B, when set in pounds unit not showing correct values - Fix issue where multiple windows repeatedly open when not using English as the system language