■ Pitch & Roll 모드 새로운 중앙 패널과 마이크로 패널은 오프로드 주행, 모터홈 수평 맞춤 등에서 공간 인식과 안전성을 높이는 데 도움을 줍니다. 위험한 각도와 안전 범위 복귀에 대한 사용자 지정 알림도 포함됩니다. ■ 개선된 트립 편집기 초기 주행거리 설정이 더 간단해졌고 트립 카운터 관리도 더 유연해졌습니다. 총 카운터와 현재 카운터를 트립 편집기에서 직접 설정하거나 초기화할 수 있습니다. ■ 전기차 지원 비용, 소비량, 주행 가능 거리에 대한 전기차 지원이 추가되었습니다. 이제 트랙 비용은 현재 설정이 아니라 트랙 완료 시 함께 저장된 비용 매개변수를 사용해 계산됩니다. ■ 고정된 트랙 기능 확장 여러 트랙을 지도에 동시에 고정하고, 색상과 선 두께를 사용자 지정하고, 고정된 트랙 세트를 프리셋으로 저장해 필요할 때 적용할 수 있습니다. 고정된 트랙 관리는 라이브 지도(길게 눌러 지도 메뉴 열기), 트랙 목록(... > 고정된 트랙), 트랙 행을 스와이프한 뒤 라이브 지도에 고정 사용, 또는 공통 지도 설정의 고정된 트랙 섹션에서 열 수 있습니다. ■ 온라인 지도 캐시 온라인 지도 소스의 타일이 이제 캐시되어 지도 탐색이 더 좋아지고 모바일 데이터 사용량이 줄며 지도 제공자에 대한 부하도 낮아집니다. 지도 목록에서 캐시 사용량을 확인하고 온라인 지도 소스 설정에서 캐시를 재설정할 수 있습니다. ■ 개선된 G-Force 모드 중앙 패널에 이제 G-Force 그래프와 함께 G-Bowl이 포함됩니다. 어떤 축의 과부하에 대해서도 사용자 지정 알림을 설정하고 한계를 더 명확하게 확인할 수 있습니다.

■ 사용자 정의 트랙 카테고리 이름 트랙 카테고리를 개인화하세요! 5개의 기본 제공 카테고리(비즈니스, 개인, 의료, 자선, 기타) 중 하나를 워크플로에 맞는 사용자 정의 이름과 약어로 이름을 변경할 수 있습니다. 사용자 정의 이름은 카테고리 선택기, 필터 및 PDF 마일리지 보고서 등 모든 곳에 표시됩니다. 설정 > 고급 설정 > GPS 트래킹 > 카테고리 이름 사용자 정의에서 액세스할 수 있습니다. ■ 카테고리별 마일리지 요금 PDF 마일리지 보고서가 이제 각 카테고리에 대해 다른 환급 요금을 지원합니다. 비즈니스 이동에 대한 요금을 설정하고 개인에 대한 다른 요금 등을 설정하세요—보고서는 그에 따라 합계를 계산하고 사용된 요금을 표시합니다. ■ 재작업된 숫자 키보드 전용 숫자 입력 키보드(UTM, MGRS 좌표 등에 사용)가 이제 iOS 버전 15-26 전체에서 제대로 작동하며 현대적으로 보입니다. iPadOS 26에서 자체 떠 있는 숫자 패드가 우리 것과 함께 표시되는 문제와 iOS 26 키보드 닫기 버튼이 화면 회전 후 올바른 위치를 잃는 문제를 수정했습니다.

• Fixed an issue where bottom toolbar buttons were difficult to see on iOS 26.1. • Fixed an issue where exporting multiple collections failed on smaller devices like iPhone 12 mini running iOS 26.

• Fixed an issue where the Filter button and the Trips/Tracks switch were not displayed on iOS 15–18 in the trips and tracks list. Huge thanks to Peter for reporting it!

• Fixed search button not being shown in some cases in waypoints list. • Fixed a rare crash that could occur on iOS 26 when exporting large offline maps.

■ Updates and optimizations for iOS 26 and beyond: • Reworked toolbars for the waypoints list, waypoint collections list, and tracks/trips list — ensuring a consistent user experience from iOS 15 through iOS 26. • Reworked search implementation in waypoints list. ◆ Camera tool: • Significantly faster camera startup. • Reworked the toolbar for image annotation. • Optimized photo stamping for higher speed and improved compatibility with iOS 15 and older devices (e.g., iPhone 6S). • Fixed an issue on older devices where the camera might not appear when opened from the Point Editor.

◆ Added the 'Mark tank as full' Siri/Shortcuts command, allowing you to integrate it into your Siri and Shortcuts automation workflows. Huge thanks to Steven for suggesting it and testing it as part of his advanced automation setup. ◆ Batch Export of Collections: Export multiple point/photo collections at once as a single KMZ file. ◆ Batch Enable/Disable Collections: Easily enable or disable several point/photo collections in one go. → To use: tap the new 'more' button (left of the '+' in the collections list), choose Select, pick collections, then choose an action from the bottom toolbar. ◆ Enhanced KMZ Import: Now supports KMZ archives with multiple subfolders and multiple KML files. → Import via the 'more' button on the points/photos list or the 'Open In' system option on iPhone/iPad. ◆ New drawing tools for annotating photos taken by the camera tool and ground image overlays: + Arrow, Rectangle, Circle, Cross pointer. + You can also adjust the line width. ◆ Other Improvements: + Added info message at the bottom of the points/photos list to indicate when collections are disabled and their items are hidden. + When exporting all tracks of a trip to a single KMZ file (for Google Earth), the app now uses the gx:Track format to preserve timestamp information for each track point. The previously used Geometry format was losing that valuable time data. + Various fixes and performance improvements.

◆ Map collections: Map collections let you prepare a map setup tailored to your mission.: + Choose a base map: Apple (street, satellite, hybrid), any online map source, or a downloaded/imported offline map. + Add map overlays (online map sources, downloaded/offline map) with adjustable transparency. + Add ground image overlays. + Switch between preconfigured map collections with a single tap. ◆ Ground Image Overlays: + Import KMZ ground image overlays directly from the map list screen. + Improved performance when displaying large ground image overlays in the maps list by using pre-cached thumbnail previews.

■ Google Maps Update (v9.4.0): + Major update from Google! The map now includes more detailed visuals like crosswalks, road lanes, and tiny directional arrows at intersections. + These enhanced details are also available in Hybrid mode. + Bonus: the long-standing stuttering issue with Google Maps is finally fixed! It’s clear someone at Google was having fun — and now we get to enjoy the results! ■ Optimizations: + Improved internal database handling results in faster performance when reading and writing data. Just note: to share or back up full trip data, you’ll need to stop the current track or make another trip active first. + The 'Focus on a map region' function and offline map previews now zoom to a reasonable level instead of starting fully zoomed out. Much easier to see your offline map now!

◆ Offline maps: + Open/Import Offline Maps from Disk/Files Directly in the App. To open or import a map directly in the app, use the '+' button on the map settings (list) screen and select the new option: Import offline map + Export/Share Offline Maps. To share or export a map, tap the 'Action' button on the offline map details screen. ◆ Mileage calculator: + Added 'Recents' to the address search in the Mileage Calculator. It now remembers the last 20 searched addresses for quick reuse with one tap. + Fixed an issue in the Mileage Calculator where some addresses couldn’t be found in the address search. Now, any address you can find in Apple Maps should also be found in the Mileage Calculator. ◆ Automatic tracking: + Option to postpone automatic driving track termination during periods of walking or running (e.g., while delivering packages). Settings > Advanced settings > GPS tracking > Automatic tracking > Detection > Location & Motion. ◆ Import: + Waypoints and photos can now be imported from files directly within the app. Supported formats: KMZ, KML, GPX, CSV, and TXT. Use the ‘More’ button on the Waypoints screen. + Tracks and trips can now be imported directly from files within the app. Supported formats: KMZ, KML, GPX, and TRK. Use the ‘More’ button on the Tracks or Trips screen. ◆ Fixes: + Fixed a crash when opening the trips filter on the trips list screen. + Fixed a crash when trimming a track in the track editor if the same track was still displayed on the main map.

◆ Updated the World Magnetic Model for 2025–2029 to ensure accurate declination data between true north and magnetic north. The World Magnetic Model (WMM) is utilized in the following areas of the app: • Magnetic Declination on the Map: You can enable magnetic declination to be visible in the map browse/edit mode. It is displayed with a δ symbol for any point at the center of the map (indicated by the red arrow). "MENU > Settings > Compass & Course > Show magnetic declination δ." • Importing Points: When importing points that specify only a true or magnetic direction, the missing counterpart (true or magnetic) is calculated using the WMM. • Off-Road Navigation: During off-road navigation, the app may use declination data provided for the current location by Apple/iOS. Except for the last point, credit for the model goes to the United States’ National Geospatial-Intelligence Agency (NGA) and the United Kingdom’s Defence Geographic Centre (DGC). ◆ Fixed the issue with imported offline map files not being deleted when you delete the map in the app. + Option added to MENU > Settings > Maintenance > Find and delete orphaned offline maps. Turns out that imported offline map files (.sqlitedb or .mbtiles) were not deleted when you delete the map in the app. Thus large files might have stayed in the app. If you have ever imported and deleted the offline maps, please check if some of the files are not left over. ◆ The currently recorded track is no longer displayed when viewing a previously saved track in the track view/editor. This ensures the saved track view is not obscured. This change applies only to Apple Maps, as Google Maps did not display the current track in the saved track view.

◆ Evolution of Siri Shortcuts: • Pre-made Siri shortcuts/commands are now available for speed limits, track control, and waypoint creation. • New background shortcuts let you apply and reset speed limits without needing to open the app or disrupt your current activity. • No more need to "donate" shortcuts to Siri in the app. Just use the pre-made shortcuts as templates in the Shortcuts app to easily add your own for unlimited speed limits and enhanced voice control for tracking and waypoints.

◆ More updates for iOS 18: • The search text for points, places, and addresses is now properly displayed in black on iOS 18 devices. • Applying a speed limit via "Hey Siri" now correctly sets the speed limit only once on iOS 18 devices. For more information on using Siri to set speed limits, please refer to the documentation. • Fixed an issue where the new coordinates converter was not displayed in the point editor. This issue was not related to iOS 18 but was caused by the new development tools, affecting all devices from iOS 15 to 18.

◆ Optimizations for iOS 18. Supported versions of iOS are now 15-18.

◆ Added a new text input-based coordinates converter. You'll find it in several places: - In the point editor, to the left of the Done button or in the Latitude/Longitude, UTM, MGRS rows. - On the map, in the map search > Coordinates. • The new coordinates converter also supports the OSGB and SK 42 coordinate systems, in addition to the current Latitude/Longitude, UTM, and MGRS formats. • This is part of our ongoing effort to bring support for the majority of EPSG coordinate systems to the app. We hope the new coordinates converter proves to be a useful tool. • Please let us know via a review or at support@blocoware.com if you'd like to see your preferred coordinate system added. ◆ Fixed a bug where the HUD/Full screen would not update the speed when the app with the active HUD/Full screen was brought back to the foreground after being in the background for a very long time.

Quick fix version 4.8.1: ◆ Quick-fix for the recent work on an iPod section. Fixed song title and artist not being refreshed for some users when song is switched in the Apple music app or in the app itself. Major version 4.8: ◆ You can now change the color of buttons in the app. This should provide more options for improved visibility of buttons in bright sunlight and potentially assist in cases involving color vision deficiencies. Settings > Advanced settings > Button colors. ◆ Google maps updated to version 9.0.0. Bug fixes and optimizations: ‣ Performance and memory related updates to the built-in iPod player so it works properly and consistently across iOS 15-17 versions. ‣ Fixed intermittent crash when asking for confirmation if you want to stop the offline map download screen on closing the download screen while download is in progress when the choice was to continue with the download. ‣ Fixed rare crash when opening the map settings.

◆ You can now change the color of buttons in the app. This should provide more options for improved visibility of buttons in bright sunlight and potentially assist in cases involving color vision deficiencies.) Settings > Advanced settings > Button colors. ◆ Google maps updated to version 9.0.0. Bug fixes and optimizations: ‣ Performance and memory related updates to the built-in iPod player so it works properly and consistently across iOS 15-17 versions. ‣ Fixed intermittent crash when asking for confirmation if you want to stop the offline map download screen on closing the download screen while download is in progress when the choice was to continue with the download. ‣ Fixed rare crash when opening the map settings.

◆ Mileage calculator adds 'My location' button to pre-populate start or end address with your current location. ◆ Rally computer advancements. (MENU > MODES Rally mode): ‣ Top trip master panel now shows 4 customizable fields. ‣ You can select background color and measurement type for each field. ‣ Rally can run as a session, recording tracks for each split/segment and allowing the app to run in the background until you finish the rally session. ‣ When rally session is active you can adjust all of the rally counters. Use ± button to enter the adjustment mode. ‣ You can configure segments for your rally and split between these segments. If you set distance or target average speed for segments, the app will give you hints on distance left in the segment and will apply the target average speed automatically. ‣ Rally settings, including segments, can be shared or backed up for later restoration, when you need to return to this particular rally. ◆ Google maps updated to version 8.4.0. ◆ From iOS 17.5, barometer related functions require access to 'Motion & Fitness'. The app now provides visual hints to enable the access, where required.

◆ Track list improvements. MENU > Tracks: ‣ Added option to search/filter by text. ‣ Top-right 'More' button now offers options to add a calculated track (via mileage calculator) or show/hide a note field in the tracks list. ‣ When track note is shown in the tracks list, you can tap on a note button to edit track fields: name, note, start/end address, category. ◆ Track view improvements: ‣ Sharing/export, pin to live map, move to another trip, selecting a view mode - all these options moved to the top-right 'More' button/menu. ‣ There is now a separate button for trimming the track at its end. ‣ Added distance to the data shown as you scrub through the track. ◆ Track fields editor improvements: ‣ Track fields editor now includes section to set categories. 'Not assigned' is included as an option for setting the category.

◆ Optimized for iOS 17.2. ◆ Google maps updated to version 8.2.0. ◆ First iteration on integration with bluetooth sensors: ‣ Heart rate ‣ Cycling speed ‣ Cycling cadence - Can be useful for cyclists or custom bike/vehicle builders. - Completely optional. Available for iOS 17 and higher. - If you want to connect bluetooth sensors, swipe through on the bottom (in portrait) or left (in landscape) panel until you see the new bluetooth sensors panel. Or use ⋮ button in the bottom or left panel to show the new bluetooth panel.

◆ Optimized for iOS 17. ◆ Removed support for iOS 12-14. Supported iOS versions are now 15, 16, 17. You can still install older app versions on the devices with older iOS versions. ◆ Improvements for land navigation: ‣ Both Estimated Time En Route (ETE) and Estimated Time of Arrival (ETA) are now supported for land/air navigation targets. Tap on ETE display to switch to ETA and vice versa. ◆ Camera tool: ‣ When you open photo from the points list, the app now provides controls to navigate through the adjacent photos in the points list, without the need to return to the list. You can swipe through or use left/right arrows.

◆ Overzoom and underzoom for offline maps: ‣ Allows to show the offline map for zoom levels that are not downloaded or imported. ‣ With overzoom you can download zoom level 2-16 and let the map upscale from zoom level 16 to 17-19 as you zoom in. ‣ Overzoom and underzoom is applied automatically, no need to set up anything. ‣ For the best experience with offline or custom/blank maps on iOS 16, please be sure to have iOS 16.4 or later. ◆ Work hours schedule for automatic driving tracking: ‣ Allows to set up a different track category for work hours and non-work hours. ‣ Allows to forbid recording automatic tracks outside of work hours. Part of 'Automatic tracking. Unlimited.' upgrade. ◆ Improvements for land navigation: ‣ New automatic check-in option that allows to check-in by simply entering the circle around the target. ‣ Settings button in the 'Set Target' menu now opens the land navigation settings screen. ‣ 'Set Target' menu now shows information on navigation settings. ◆ Bug fixes and optimizations: ‣ Optimized for iOS 16.5. ‣ Improved time zone handling for the Mileage calculator(MENU > Mileage/cost/fuel calculator).

◆ Mileage, cost and fuel calculator. MENU > Mileage/cost/fuel calculator: ‣ Find alternative driving routes based on start/end address and see their distance/duration, estimated cost and fuel required. For regular routes, set week days and dates range to see the total estimated cost/fuel, one-way or return. ‣ Create a track for the estimated routes found for the start/end address. Useful when you forgot to record a track and need it for the mileage log or reimbursement/PDF report that the app generates. ‣ Create a batch of tracks for the selected route and weekdays within the date range, one-way or return. Useful when you didn't use the automatic tracking and forgot to track for a longer period of time, or when you need to generate tracks for the mileage report for the dark times when you have not had the app yet. Part of 'Automatic tracking. Unlimited.' upgrade. ‣ Available in iOS 15 and later. ◆ Bug fixes and optimizations: ‣ Import of tracks from KML and GPX should be now 10x faster. ---- New features in previous versions (4.0-4.1): ◆Track list improvements. MENU > Tracks: ‣ Track list now shows total mileage and duration for each day with tracks recorded. ‣ '⋮' button in the daily totals row allows to generate PDF report for the day or export the list of tracks for the day. ‣ Applied filter, number of shown tracks and their total distance is now shown at the bottom of the track list. ◆ PDF Mileage reports You can now generate PDF reports for the recorded tracks/mileage. Can be convenient for mileage reimbursement purposes: ‣ In any tracks list screen > Action button > Generate PDF report. ‣ Available in iOS 15 and later. ◆ Automatic recording of automotive activities, optional: ‣ Allows to record automotive/driving activities automatically, no need to manually start and stop the track recording. No need to keep the app running. Configure once and let the app track the mileage for you, for tax deductions or reimbursement. ‣ As this function has its recurring costs to maintain and test, 50 free auto-tracks are provided per month. If you need more auto-track recordings per month, you can upgrade to the unlimited number of auto-tracks. Thank you for the ongoing feedback and trust!

1. Track list improvements. MENU > Tracks: ‣ Track list now shows total mileage and duration for each day with tracks recorded. ‣ 'More' button in the daily totals row allows to generate PDF report for the day or export the list of tracks for the day. ‣ Applied filter, number of shown tracks and their total distance is now shown at the bottom of the track list. 2. Bug fixes and optimizations: ‣ Fixed magnetic compass readings being intermittently frozen when using automatic tracking. ‣ More optimizations for iOS 16.4. Minimizing map memory consumption. ---- New features in the previous versions (4.0): 1. You can now generate PDF reports for the recorded tracks/mileage. Can be convenient for mileage reimbursement purposes: ‣ In any tracks list screen > Action button > Generate PDF report. ‣ Available in iOS 15 and later. 2. Automatic recording of automotive activities, optional: ‣ Allows to record automotive/driving activities automatically, no need to manually start and stop the track recording. No need to keep the app running. Configure once and let the app track the mileage for you, for tax deductions or reimbursement. ‣ As this function has its recurring costs to maintain and test, 50 free auto-tracks are provided per month. If you need more auto-track recordings per month, you can upgrade to the unlimited number of auto-tracks. Thank you for the ongoing feedback and trust!

More optimizations for iOS 16.4 + Camera tool adds option to re-use comments from the old waypoint photos. New features in previous versions (4.0): 1. You can now generate PDF reports for the recorded tracks/mileage. Can be convenient for mileage reimbursement purposes: ‣ PDF mileage report has customizable title, subtitle, footer, distance unit, unit value and currency symbol. ‣ PDF mileage report opens in a PDF preview so you can sign or annotate it before sending out or sharing. ‣ In any tracks list screen > Action button > Generate PDF report ‣ Available in iOS 15 and later. 2. Automatic recording of automotive activities, optional: ‣ Allows to record automotive/driving activities automatically, no need to manually start and stop the track recording. No need to keep the app running. Configure once and let the app track the mileage for you, for tax refund or reimbursement. ‣ As this function has its recurring costs to maintain and test, 50 free auto-tracks are provided per month. If you need more auto-track recordings per month, you can upgrade to the unlimited number of auto-tracks. 3. Trim track at the end: ‣ As automatic tracking needs to trim the track at the boundaries of automotive activity - the app also adds a function of a track trimming at its end. 'More' button in the track review screen > 'Trim'. 4. Bug fixes and optimizations: ‣ Fixed the issue when audio notes for the waypoint would not be recorded on iOS 16.2 and iOS 16.3. Thanks to Wolfgang for reporting the issue. 5. For the best offline map performance on iOS 16, please update to iOS 16.4. Thank you for the ongoing feedback and trust!