- Added new “Play Group Mode” action - Added “Join” function for multi-project session recordings, to combine related tracks across projects for easier import into a DAW - Added option to bypass “Use Link Tempo” prompt on load - Added Assign Group Settings convenience action - Fixed issue where changing MIDI destinations could cut off unrelated playing MIDI - Re-added support for solo actions affecting one shots - Added default visibility icon to add effect screen - Revised appearance of on-off effect state button in add effect screen - Fixed a couple of crashes

- Fixed an issue where the “Count-In Only” metronome setting wasn’t working properly when clock count-in was enabled - Added “Original Tempo” option for all imported clips, even if time-stretching is turned off - Fixed a crash when exporting from the sequencer - Fixed colour selection indicators not showing correctly sometimes - Fixed an issue with IO buffer duration not being set correctly - Fixed issues with some input hardware with many channels - Fixed scene buttons not following the cursor on APC Mini Mk2 and Key 25 controllers - “Mute/Unmute Audio Source” action now respects the Mute Position default from the mixer configuration

- Ignore “Wait For Playback” when Audio Threshold Recording enabled - Fixed issues with OSC bindings - Fixed "Monitor Through Color" icon missing colour if empty of clips - Fixed some crashes

Fixed a hang that could occur with retrospective recording

• Support for mono-only Audio Units • Improved clip recording performance • Fixed rare hang during layout on some projects • Fixed memory leak in AUv3 plugin • Resolved issue with retro overdub feedback • Fixed visual alignment glitch when recording MIDI clips • Fixed crash when rotary encoder is mapped to clip speed • Fixed issues with Send MIDI action when targeting MIDI colors • Purchasing upgrade now works correctly when a free license is active • Various crash fixes and stability improvements

Loopy Pro 2.0 is here! This is the biggest update yet — and it opens up a whole new world of possibilities. ————— MIDI CLIPS & SEQUENCER Record, edit, and play back MIDI directly in Loopy Pro. Sequence beats, melodies, or automate your performance — right on the canvas. POLYPHONIC CLIP PLAYBACK Play audio clips sliced or pitched across your controller. Turn any clip into a playable instrument. BUS-TO-BUS ROUTING Route audio between buses for advanced mixing setups and custom FX chains. GROOVE QUANTIZATION (“WARP”) Quantize audio and MIDI clips to swing, randomness, or your own groove — tight or loose, your choice. REVISED MIXER Collapse groups, see signal sources clearly, and stay focused even in big projects. DOCKABLE PLUGIN PANELS Pin plugin windows to screen edges to keep your workspace clean. ————— MORE MIDI & CANVAS TOOLS • On-screen dockable MIDI keyboards • Rotary encoder widget • “Next Empty Clip” action targeting • New “Assign Clip Settings” and “Clip Offset” actions • Better canvas editing: select, move, scale multiple items • Improved widget controls: radio buttons, dials, retriggering ————— WORKFLOW IMPROVEMENTS • Auto Count-Out for overdubs • Merge clips with the new Append action • Latency compensation for MIDI controllers • Plugin preset import/export • 128 parameter save/restore slots • Copy/paste multiple actions • New “Correct Clock Tempo” action • Cleaner UI for clip and color settings • Support for the APC Mini Mk2 and APC Key 25 Mk2 ————— UNDER THE HOOD • Faster performance, reduced CPU usage and power consumption • Updated Rubber Band time stretching library — cleaner, higher-quality pitch/tempo control • Better undo handling and session stability • Lots of small UI and interaction improvements ————— Thanks for supporting Loopy Pro and helping it grow. This is a huge milestone — and just the beginning of what’s next. – Michael

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added “Show Hold Button” option for X/Y Pads (default: on) - Switch to main screen when prompting for clips, if elsewhere - When unmuting hardware audio source at input, remove auto-mute as well - Increased maximum displayed stepped dial/radio actions from 32 to 128 - Made waveform display follow track duration when multiplying/dividing/etc

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Fixed issue with binding impulse actions, where hold/on-off actions were bound instead of impulse ones - Fixed an issue that could cause an AUv3 crash - Fixed a crash in preset action configuration - Fixed “Simultaneous Recording” override at clip level Changes in 1.1.20: - Added new Save/Restore parameter actions, to store values of selected parameters, and recall them later. Even works across multiple plugins. Preset morphing! - Added new “Toggle Sequence” action: Turn the sequence on or off, with the option to resume at prior playback position. Great for pausing a sequenced session for a jam, then jumping back into the sequence after. - Added “Individual Outputs” option for session recording: Record your output channels separately. - Added continuous adjustment of clock phase, via Phase Align Clock action: Move the downbeat around, relative to your playing loops. - Added thumbnail icons for projects - Added support for 3FH/41H (midpoint 64) relative CC encoding (used by MIDI Fighter Twister, for example) - Added work-around for an iOS bug that reports incorrect number of audio interface input/output channels - Added new Stop vs Retrigger settings for “Already-Playing One-Shots” - Fixed an issue with load project action not starting - Fixed some gesture conflicts that could result in delayed record end if a double-tap or hold present - Fixed issue with Track Phase Align when transitioning from reverse

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Fixed issue where merge action could occur before a record was finalised - Fixed issue that could break relational clip subjects (“Next Clip” etc) - Fixed crash when selecting effect target for preset and open interface actions Changes in 1.1.20: - Added new Save/Restore parameter actions, to store values of selected parameters, and recall them later. Even works across multiple plugins. Preset morphing! - Added new “Toggle Sequence” action: Turn the sequence on or off, with the option to resume at prior playback position. Great for pausing a sequenced session for a jam, then jumping back into the sequence after. - Added “Individual Outputs” option for session recording: Record your output channels separately. - Added continuous adjustment of clock phase, via Phase Align Clock action: Move the downbeat around, relative to your playing loops. - Added thumbnail icons for projects - Added support for 3FH/41H (midpoint 64) relative CC encoding (used by MIDI Fighter Twister, for example) - Added work-around for an iOS bug that reports incorrect number of audio interface input/output channels - Added new Stop vs Retrigger settings for “Already-Playing One-Shots” - Fixed an issue with load project action not starting - Fixed some gesture conflicts that could result in delayed record end if a double-tap or hold present - Fixed issue with Track Phase Align when transitioning from reverse

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Fixed an issue with value ramping for "Trigger Widget" actions Changes in 1.1.20: - Added new Save/Restore parameter actions, to store values of selected parameters, and recall them later. Even works across multiple plugins. Preset morphing! - Added new “Toggle Sequence” action: Turn the sequence on or off, with the option to resume at prior playback position. Great for pausing a sequenced session for a jam, then jumping back into the sequence after. - Added “Individual Outputs” option for session recording: Record your output channels separately. - Added continuous adjustment of clock phase, via Phase Align Clock action: Move the downbeat around, relative to your playing loops. - Added thumbnail icons for projects - Added support for 3FH/41H (midpoint 64) relative CC encoding (used by MIDI Fighter Twister, for example) - Added work-around for an iOS bug that reports incorrect number of audio interface input/output channels - Added new Stop vs Retrigger settings for “Already-Playing One-Shots” - Fixed an issue with load project action not starting - Fixed some gesture conflicts that could result in delayed record end if a double-tap or hold present - Fixed issue with Track Phase Align when transitioning from reverse

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added new Save/Restore parameter actions, to store values of selected parameters, and recall them later. Even works across multiple plugins. Preset morphing! - Added new “Toggle Sequence” action: Turn the sequence on or off, with the option to resume at prior playback position. Great for pausing a sequenced session for a jam, then jumping back into the sequence after. - Added “Individual Outputs” option for session recording: Record your output channels separately. - Added continuous adjustment of clock phase, via Phase Align Clock action: Move the downbeat around, relative to your playing loops. - Added thumbnail icons for projects - Added support for 3FH/41H (midpoint 64) relative CC encoding (used by MIDI Fighter Twister, for example) - Added work-around for an iOS bug that reports incorrect number of audio interface input/output channels - Added new Stop vs Retrigger settings for “Already-Playing One-Shots” - Fixed an issue with load project action not starting - Fixed some gesture conflicts that could result in delayed record end if a double-tap or hold present - Fixed issue with Track Phase Align when transitioning from reverse

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added a new sample template: Adam Searan’s Simple 4 Track Looper - Added “Phase Align Clock” action - Added support for second parameter for OSC state feedback messages, containing current unscaled parameter value - Added “If Counting In/Out” setting for record actions - Added “Set Tempo If Unset” option for Link toggle action (on by default) - Implemented new frictionless trial system - Fixed a crash when sending long SysEx messages with the Send MIDI action - Fixed a sporadic phase align action issue when clip playing in reverse - Fixed an issue with automatic audio source muting - Fixed issue with making multiple parameter bindings using plugin parameter discovery button - Fixed state feedback issue with stepped dial/radio widgets with “Deselect” actions present

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added configurable return-on-pause for play/pause button (find in Clock Settings, or long-press play button) - Added dedicated rewind button on sequencer toolbar - Added “Toggle Mixer” action - Added MIDI channel remapping option for MIDI destinations - Added warnings for some problematic conditions: low disk space, Network MIDI or Multiroute Audio enabled - Avoid redundant saves when terminating/moving to background - Allow Stepped Dial widgets to track state of their individual actions - Allow “mutually exclusive” groups with “independent” types - Improved canvas element copy/paste - Implemented rendering of overdub decay in clip waveforms - Tweaked ‘clips play independently’ play group behaviour when playing/recording a member while others counting-out - Tweaked behaviour of retro recording to allow completion of record even if buffer not yet filled enough - Added a workaround for a MIDI system bug that prevented saving profiles for some problematic hardware (looking at you, Tascam Model 12!) - Fixed some issues with adding audio sources in certain conditions - Fixed a gesture conflict between hold-to-play one shots and a record action on tap - Fixed a possible hang when importing mp3 files - Fixed audio source mute action when ramp specified - Fixed AUv3 keyboard focus workaround issue which might cause flickering - Fixed clip slicer hold to play - Fixed issue where active clip might not continue playing after tempo set following clock reset - Fixed issue where playhead jumps after disabling a timeline loop region while looping - Fixed issue with some volume/gain actions when toggling between values - Fixed issues with tempo x/÷ correction, and time scaling after tempo reset, where ‘original tempo’ could be set to incorrect values - Fixed swipe on one shots with certain configurations - Tweaked audio source automatic muting to avoid possible incorrect unmute on load - Fixed missing waveform layer rendering in sequencer - Fixed Musical Typing treating enter key as sustain (should be just tab) - Fixed issues with chaining record of clips with overdub-after-recording set (Simultaneous Recording off) - Fixed “Waiting for Clock Start” state when starting second loop recording while first loop still recording (it should just begin recording) - Avoid unexpected record start of record-on-touch clip when released while still waiting for threshold recording - Fixed issue where “Cancel Count Ins” action could interfere with overdub layer advance - Fixed some issues with importing, caused by tempo handling discrepancies - Fixed pitch bend MIDI messages for Send MIDI action - Fixed some layout editing issues with text and tutorial widgets - Fixed some tempo issues when trimming - Fixed issue where track could go silent briefly when trimming - Fixed an issue with stopping and playing back a clip with “Pad Loop Length” enabled, immediately after recording - Fixed issue with overdub feedback handling when trimming - Fixed issues with selection in sequencer - Fixed issue with playback of very short clips (after trimming, or importing) - Fixed issue that could lead to "ghost" control bindings - Fixed auto loop detection when starting with a pre-set tempo - Ignore AUv3 render timeouts in diagnostic mode (for debugging AUv3s within LP)

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added Musical Typing: Use an attached computer keyboard to play an AUv3 instrument - Added Clip Playhead action: View and adjust playback position of a clip or group of clips - Added Beats Per Bar action - Added parameter discovery for MIDI learn when showing plugin UI - Added “Input Gain” parameter for audio sources, and added “Mute Position” option for audio source mute to enable mute at input (useful for making input effects idle upon mute) - Added long-press on audio source mute button in mixer to choose mute position - Added support for restart of the free trial - Made Audio and MIDI sources ignore each other when soloing via mixer - Automatically add plugin MIDI destination when adding a MIDI source, if there’s just one candidate - Fixed issue with MIDI-capable effects not being able to be targeted by Send MIDI action - Fixed issue switching between “Off” and other MIDI trigger states - Fixed an issue with play/stop actions occasionally using the wrong quantisation setting - Implemented partial workaround for loss of keyboard focus when interacting with AUv3s - Fixed issue with missing clip play/stop notifications, which could prevent follow actions from firing - Fixed an issue where selected preset sometimes isn’t updated when choosing an AUv3 factory preset while a user preset selected - Fixed “invert” state for parameter assignment/toggle actions - Show tempo, metronome and master volume actions for toggle triggers - Revise phase preservation to work correctly when immediately recording a second clip/performing other actions - Revised implementation of “Retrigger” feature of play action to fix issue with “Play Once” - Fixed issue with automatically-muted sources not actually being muted sometimes - Fixed issue where successive recording and playback stop actions could result in a spurious count-out - Fixed filting of non-voice MIDI messages when channel filter specified for MIDI destinations

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Fixed orientation with some new projects created in portrait mode - Fixed some issues with relative CC control - Fixed clip speed adjustments when time fitting set to "Varispeed" - Fixed issue with "Send MIDI" actions targeting an AUv3 sometimes no longer working after reloading a project

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added computer keyboard control support: trigger Loopy Pro's actions from a computer keyboard, or a device that acts as one - Added “Beats” units for ramp and fade settings - Increased minimum retro record buffer to 8 bars - Fixed sync issues with some MIDI AUv3s - Fixed Send parameter nudge configuration slider - Fixed saving of project settings upon save - Added list of owned features to bottom of System Settings screen

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Implemented separate overdub count in/out setting - Added “Retrigger Current Value” action for targeting stepped dial/radio widgets - Fixed crash when starting new project while clip awaiting threshold record - Fixed issue where loop could fail to play back upon initial record - Fixed issue with state display of radio widgets - Fixed issue with “Load Project” follow actions not firing - Fixed loop re-record incorrectly causing playback to end - Fixed missing “Toggle” option for “Trigger Widget” action - Fixed state feedback for “Scroll” actions of radio/stepped dial widgets - Fixed “Pick Up” parameter issue with some parameters - Fixed issue with loop drift in certain circumstances - Fixed a crash during record scheduling - Fixed a possible hang

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Fixed crash when using wrap around with some nudge actions - Fixed a text rendering issue

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added 32 and 64 division options for clip slicer - Added “Sync Start/Stop” setting for MIDI clock; when off, behaves like Ableton Link sync - Added “Wrap Around” setting for “Nudge” actions - Added “Auto-Mute Audio Sources” feature (mute sources that may cause feedback when disconnecting your audio interface), replacing “Reset Audio Source Sends” - Improved tail recording - Improved MIDI/Link clock sync, to allow “Phase Preservation” to work correctly - Improved MIDI Learn for “impulse” CC triggers - Don’t reset clip volume when clearing - Fixed an issue with loading projects from saved state when LP is loaded as an AUv3 - Only play loop outro if loop will stop playing at loop boundary (allows immediate stop) - Perform “Play” follow actions after initial record ends, not when it starts - Revised playback behaviour to ensure play groups are always respected for solo actions and when targeting multiple clips - Tweaked startup and route change handling to avoid potential feedback - Wait for threshold recording to begin before switching one-at-a-time/etc playback - Fixed a click when transitioning to tail playback in loop - Fixed an issue with Launchpad/APC40 device discovery - Fixed an issue where a track that was playing on project load, then cleared and recorded with stop after record, didn’t stop - Fixed an issue where “Trigger Widget” actions could change when the target widget’s actions change - Fixed an issue where loop outro might not play - Fixed an issue where set of playing clips not preserved when toggling playback state of a selection of clips - Fixed an issue where widget editor screens could become unresponsive - Fixed an issue with possible click when transitioning to loop outro - Fixed incorrect initial playhead for non-phase-locked retro record loops - Fixed "Use Velocity" setting for MIDI control of clip playback - Fixed some Apple Pencil interaction issues - Fixed some issues with trimming the initial loop - Fixed “Assign Value” actions for stepped dial/radio widgets - Fixed a “Phase Preservation” issue with non-phase-locked loops - Fixed an issue with duplicating profiles and making successive edits

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added support for input selection (e.g. built-in mic or wired mic) - Fixed issue with LP AUv3 state loading where project could fail to load from saved state - Fixed delayed touch interaction on XY pads - Fixed an issue where trimming initial loop could cause it to go silent briefly

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added workaround for developer tools bug which caused a crash on iOS 14 and lower

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Fixed double-count-in interval when both clock count-in and loop record count-in enabled - Updated Ableton Link library to fix crash on iOS 12

See what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added some measures to avoid conflicting workspace accesses when using “Load Project” action - Added “Previous” options for “Load Project” - Better Zoom/FaceTime/etc compatibility: Enter playback-only mode when microphone in use by video conferencing - Don’t disable fade-out if also playing outro - Improved recursion detection for actions system - Improved slider interaction - Revised canvas element selection appearance - When starting loop record with clock paused and clock count-in enabled, do count-in first - Fixed an issue where sequencer could behave strangely immediately after “Load Project” action, if timeline loop present - Fixed an issue with incorrect sequence playback after tempo change - Fixed extended mixer in landscape on iPhone - Fixed issue where intro didn’t play (or created a buzz) when starting sequencer from a “Load Project” action - Fixed issue where undo/redo could be broken when cancelling recording by clearing a clip - Fixed issue with sequence playback immediately following “Load Project” action - Fixed missing “Play” follow actions for playing tracks on project load with “Load Project” action - Fixed numeric input in regions that use “,” or other characters for decimal separator - Fixed silent first loop when recorded with retrospective recording and loop audio threshold recording on - Fixed occasional project load issues (including time-stretching weirdness) - Fixed some crashes

Version 1.1 is a significant update: See the full list of changes at roadmap.loopypro.com/changelog, and see what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added new "State Feedback" setting for widgets, to determine how to display state, based on actions - Added “Show Color Labels On Clips” accessibility option - Added “Auto Count Out Overdub” switch for one-shot clips’ recording settings (enabled by default) - Made some improvements to auto loop detection - Made “Second Quantization” setting apply to record start, as well as playback actions - Revised “Solo” functionality to apply to all mixer channels; added Bus Solo action - Fixed a couple of crashes - Fixed an issue with initial state display for widgets - Fixed buzz when overdubbing one-shots - Fixed decibel slider scale - Fixed feedback for “Solo” actions - Fixed incorrect behaviour with “Play” action for a play group when it’s already playing - Fixed incorrect limit of EQ/Lowpass/etc filter cutoff/center parameters on load - Fixed initial presentation of “Show Automatically” tutorial widgets on a different page - Fixed issue where plugin windows could open on their own when switching back to main screen after changing presets - Fixed issue with audible changes to biquad effect (lowpass/EQ/etc) parameters when returning from idle - Fixed issue with clip slicer/button grid not working after changing number of buttons - Fixed issue with stepping through AUv3 user presets - Fixed issue with updating “Original Tempo” clip setting with keyboard input - Fixed issue with “armed” sequence playback, where recorded clips were not stopping correctly - Fixed master volume action scale issue - Fixed issue with “Input Gain” parameter range

Version 1.1 is a significant update: See the full list of changes at roadmap.loopypro.com/changelog, and see what's coming next in Loopy Pro, help guide development and follow specific features at LP's roadmap: roadmap.loopypro.com - Added Multiroute Audio, for using built-in headphone port and USB audio interface simultaneously - Added support for Bluetooth advertising (advertise device as Bluetooth peripheral) - Added ability to rename MIDI sources - Added labels to color swatches in editor - Added support for multiple metronome outputs - Made “Nudge” action for Speed and Rate multiply rather than add (e.g. Nudge 0.5 will halve, 2 will double, -1 will toggle between forward and reverse) - Enabled Copy for actions within Control Settings section - Improved MIDI Learn: Now does better at recognising and adapting to incoming trigger types (continuous versus impulse) - Improved MIDI trigger selection screen, to facilitate changing trigger types - Revised keyboard layout slightly and added octave navigation buttons - Revised square count-down layer to be linear - Show count-in/out on clips when playing intro/outro, and show intro/outro playhead on waveform in clip screen - Update any pre-set loop durations to correctly reflect changes to time signature - When using a continuous control to adjust a stepped dial/radio, only perform actions when index changes (prevents spamming the action, which can cause issues like skipping quantization delay) - Round loop durations to whole numbers of beats, if they are slightly out, to address potential drift issues - Revised binding execution to always begin from the first action when triggered rather than continuing from last position if cancelled - Made some small adjustments to clip scheduler to avoid conflict between play toggle on press, and solo on hold/double-tap - Fixed a number of glitches with overdub feedback - Fixed a possible crash when switching pages - Fixed a potential crash when loading an old project - Fixed issue with saved time-scaled audio, when LP loaded as AUv3 - Fixed issue where overdub might fail if tail recording enabled - Fixed issue where sequence-armed loop wouldn’t stop at end of sequenced segment - Fixed issue where “Auto Count-Out” didn’t take effect for the second loop recorded, if started immediately after first - Fixed issue with OSC not working with global profiles - Fixed issue with actions not being performed after parameter ramps - Fixed potential issue with Play/Stop follow action execution - Fixed issue with triggering widgets with quantized/delayed actions - Fixed pops when changing loop playback state while paused - Fixed some memory leaks - Fixed some performance issues - Fixed an issue with mouse scrolling