Cabinetmaker Calc

工具程式

$290.00 · 專為 iPad 設計。尚未針對 macOS 驗證。

Cabinetmaker Calc is a practical offline tool for cabinetmakers and furniture installers. It helps you plan drawer layouts, calculate drawer component dimensions and prepare drilling positions for furniture fittings. DRAWERS AND BOX SYSTEMS The app supports overlay and inset fronts, different runner lengths, steel and wooden backs, internal drawers, Gola profiles and compatible TIP-ON / PUSH variants. Supported box systems: • Blum TANDEMBOX antaro • Blum MERIVOBOX • Blum LEGRABOX • Hettich AvanTech YOU • Hettich InnoTech Atira • Strong StrongBox • Strong StrongMax 16 • Strong StrongMax 18 • Häfele Matrix S Slim • GTV MODERN BOX PRO • GTV AXIS PRO 16 • GTV AXIS PRO 18 • GTV MODERN BOX SQUARE • GRASS Nova Pro Scala • Level SPACE PRO • Level BOX Drawer calculations include: • dimension and installation-space checks • a clear diagram of the complete cabinet • drilling heights and positions for cabinet runners • drawer-front drilling, including drilling-template mode • dimensions for drawer bottoms, drawer backs and other drawer components • calculations for internal drawers and Gola profiles • installation PDFs for sharing, printing or saving • automatic front-height distribution and calculation of remaining fronts • multiple internal drawers behind one front • runner variants, load capacities and mounting-hole rows according to the selected system • independent upward adjustment of an outer drawer and Gola C dimensions to the centre or lower edge NARROW CABINETS Configure 1–8 drawers behind a shared front and choose which are attached to the front and which are internal. Edit storage heights directly in the side-view diagram, check minimum heights and available space, and allow finger clearance above internal fronts. Automatic layout assigns the required minimum to internal drawers and distributes the remaining space between attached drawers. You can raise the bottom drawer independently. The installation PDF fits on one A4 page and includes larger side-panel diagrams, drilling positions and drawer component dimensions. Save box and narrow-cabinet assemblies under a name and load them again later. The assembly name also appears in the PDF. The app also includes tools for Blum MOVENTO and TANDEM runner systems with wooden drawer sides. LIFT SYSTEMS The calculator helps determine the front weight, suitable lift mechanism, drilling positions, required installation space and ordering summary for: • Blum AVENTOS HK top • Blum AVENTOS HK-S • Blum AVENTOS HK-XS • Blum AVENTOS HF top • Blum AVENTOS HS top • Blum AVENTOS HL top MORE WORKSHOP TOOLS • furniture-handle drilling calculations • even spacing of cabinet-door hinges • cutlery-tray dimensions • shelf layout and shelf-support drilling • squareness checks using diagonal measurements • component dimensions for an individual drawer • a local list of installation jobs and notes • clear technical diagrams and dimensions OFFLINE CALCULATIONS, NO ACCOUNT OR ADVERTISING The app works offline, requires no registration and contains no advertising. Entered dimensions, settings and installation jobs remain stored directly on your device. Values and calculations are continuously checked against manufacturers’ catalogues, installation instructions, planning tools and electronic services. Before production, always verify the entered dimensions and consult the manufacturer’s current technical documentation.

評分與評論

  • 此 App 尚未收到足夠的評分或評論，無法顯示概覽。

Version 1.0.8 brings more options for drawer cabinets and clearer workshop documents. • Redesigned narrow-cabinet calculator: configure 1–8 drawers behind one front and choose attached or internal drawers. Edit storage heights in the side-view diagram, see minimum heights and remaining space, set finger clearance and raise the bottom drawer independently. • Save named box and narrow-cabinet assemblies and load them again. Assembly names also appear in PDFs. • Extended box-system options: distribute front heights, calculate remaining fronts, add multiple internal drawers and select compatible runner variants, load capacities and mounting-hole rows. • Raise an outer drawer independently and choose Gola C dimensions to the centre or lower edge of the milling. • Narrow-cabinet installation PDFs now fit on one A4 page with larger side-panel diagrams, drilling positions and drawer component dimensions. • AVENTOS: separate left and right front gaps and left/right placement of the third lift mechanism in supported configurations. A ± button makes negative-overlap inputs easier. • Updated startup news, a rating button in About, and support email subjects containing the app version and iOS. • Added Level SPACE PRO and Level BOX.

版本 1.0.8

開發者Petr Hanc指出App的隱私權實務可能包含下方描述的資料處理。如需更多資訊，請參閱 開發者的隱私權政策 。

  • 不收集資料

    開發者不會從這個 App 收集任何資料。

    依據你使用的功能或你的年齡等因素，隱私權實務可能有所不同。 更多內容

    輔助使用

    開發者尚未表示此 App 支援的輔助使用功能。 進一步瞭解

    資訊

    供應商
    Petr Hanc
    大小
    47.4 MB
    類別
    工具程式
    相容性
    需要 iOS 16.0 或以上版本。
    • iPhone
      需要 iOS 16.0 或以上版本。
    • iPad
      需要 iPadOS 16.0 或以上版本。
    • Mac
      需要 macOS 13.0（或以上版本）以及配備 Apple M1（或以上版本）晶片的 Mac。
    語言
    德文和其他4種
    • 德文、捷克文、斯洛伐克文、波蘭文、英文
    年齡分級
    4+
    版權
    © 2026 Petr Hanč
  • 開發者網站
  • 隱私權政策

    • 支援

    • 家人共享

      啟用「家人共享」後，可讓最多六位家庭成員使用此App。

    你可能也會喜歡